Professional Documents
Culture Documents
Technology: Answers Drawing C
Technology: Answers Drawing C
Answers Drawing C
BS EN 22553
Course Reference WIS 10
Copyright © 2003 TWI Ltd M.S.Rogers
symbols
1
Drawings and Weld Symbol Interpretation
With the supplied drawing you are required to carry out the
TECHNOLOGY
following
1. Reference the drawing number onto your answer sheet
2. Specify the standard to which the weld symbols apply
3. Produce a neat sketch of how you see the welds,
numbering each weld individually.
4. Fully describe each weld symbol, example
Welded arrow side: Single-V butt
Welded other side: Sealing run.
5. On completion of the welding symbol interpretation, you
are then required to comment on the drawing with
reference to errors and incorrect set-ups
Copyright © 2003 TWI Ltd M.S.Rogers
TECHNOLOGY
2
BS EN 22553 Answers DRG C
3
BS EN 22553 Answers DRG C
12. Welded arrow side: Double bevel butt weld, 16mm leg
length fillet weld superimposed, weld to be made all
way around component.
Note: fillet weld should be placed on other side.
Copyright © 2003 TWI Ltd M.S.Rogers
15. Welded arrow side: 12mm leg length, welded all way
around part (peripheral) weld
4
BS EN 22553 Answers DRG C
50
19. Welded both sides: Three 12mm leg length fillet
welds, each weld 50mm in length, To be welded with
the MAG process. 50
peripheral weld
5
BS EN 22553 Answers DRG C
25. Welded both sides: Concave fillet weld with 12mm leg
lengths. MT inspection required.
Any Questions
TECHNOLOGY