This checklist is used to inspect diesel generators and contains 16 points to check such as earth conductor continuity and tightness, earth resistance measurement, stack height compliance, guarding of rotating parts, fire protection equipment, and acoustic insulation. The inspector records their observations and remarks for each point on the generator's make and model, location, and serial number. A signature and designation are required on the completed form.
This checklist is used to inspect diesel generators and contains 16 points to check such as earth conductor continuity and tightness, earth resistance measurement, stack height compliance, guarding of rotating parts, fire protection equipment, and acoustic insulation. The inspector records their observations and remarks for each point on the generator's make and model, location, and serial number. A signature and designation are required on the completed form.
This checklist is used to inspect diesel generators and contains 16 points to check such as earth conductor continuity and tightness, earth resistance measurement, stack height compliance, guarding of rotating parts, fire protection equipment, and acoustic insulation. The inspector records their observations and remarks for each point on the generator's make and model, location, and serial number. A signature and designation are required on the completed form.
CHECKLIST FOR DIESEL GENERATOR (DG) Issue. Date 08-12-2018 Rev. Date 00-00-00
Page No. 1
Name of Project: Date:
Make & Model: Site/Location:
Inspected by: Serial No.:
SR. NO. POINTS OBSERVATIONS REMARKS
Whether the continuity and tightness of earth conductor
1 are checked?
2 Mention the SWG of the earth conductor used
3 Whether earth resistance is measured?
4 Mention the value of Earth Resistance 5 Is DG provided under shed / cover? 6 Whether entry is restricted into the DG room? 7 Are cable trenches are covered? 8 Is insulation provided on the battery terminals? 9 Is thermal insulation done for the DG exhaust
Whether stack height is maintained as per Environment
10 requirements given in procedure manual?
11 Whether DG exhaust is diverted out side the shed?
Are all the rotating parts of DG guarded (coupling,
12 radiator fan)?
13 Whether any leakage of fuel / oil in the DG room?
Whether DG surrounding is free from flammable
14 material?
Whether fire extinguisher / fire buckets with stand are