TX-0187.4
MODEL
F-N207
ENCRUSTING MACHINE
PARTS CATALOG
DATE OF ISSUE APR. 1986
Hen Kf
®
RHEON AUTOMATIC MACHINERY CO., LTD
7%0187.4-1Ruan
INTRODUCTION
1, GENERAL,
This Parts Catalog is intended for the export type of Rheon Enerusting Machine Model
N2078S in order to ensure easier supply of the parts,
2. COMPOSITION
‘This Parts Catalog is made up of collection of manuals.
Please refer to Table of Contents for composition of the manuals.
3. APPLICABILITY
‘The applicable machine serial number is indicated on each manual.
4. SUPPLY OF THE PARTS
When the demand for part
following necessary information to Rheon Offices or Rheon Dealer:
(Q) Part Number
(2) Nomenclature (Part Name)
() Quantity
(A) Machine Serial Number of the pertinent machine,
Please note that there is supply of an assembled parts instead of supply of one single
component part of the assembled parts.
supply occurs, please send an ordersheet that contains
Head Office ; RHEON AUTOMATIC MACHINERY CO., LTD.
2-8 Nozawa-machi, Utsunomlya city, Tochig! 320 Japan
Phone : (0286)65-1111, Cable ; RHEON UTSUNOMIYA,
Telex + 3522350 Pax (0286)33-8202
Branch Office :RHEON AUTMATIC MACHINERY G.mbHt
Postfach 6634
Gauss-Strasse 10, D-4000 Diisseldorf, F.R,Germany
Phone : (0211)281078~231076, Telex : 8587440
Fax 201-967-1547,
RHEON U.S.A.
504 Industrial Avenue, Paramus, N.J.07652, U.S.A.
Pheon ; 201-867-1530, Telex : 134479
Fax 2{1-285081
RHEON U.S.A, HAYASHI TECHNICAL RESEARCH CENTER
17751 Cowah Avenue, Irvine, 92714-6064 U.S.A.
Phone : 714-863-1358 Telex : 682484
Fax 714-660-1647
7x-0187.4-2Rren/
5, RULES AND CONTENTS OF EACH MANUAL.
Bach manual is made up by following rules and contents and explained individually in
Fig. and Table 1 by numerical index which make cross-references with the following
Items,
(1) MANUAL NUMBER
Manual Number is shown at the right foot. The number Is made up of 5 digits and
last numerical figure after decimal point will change at revision for composition of
the parts and compilation,
Manual Number
tes page number of each manu:
Is variable.
(2) PART NUMBER
There are 4 types of Parts Number as follows:
1.Part manufactured by Rheon. (Example : A260520, 0010540)
‘The number is made up of 7 digits and the number which has “O" on the head of
the number principally shows an assembled parts which can not be disassembled,
and such parts Is treated as one single part.
2,Assembled Part Numbers (Example: H003170)
The number Is made up of 6 digits with "H” on tho head represents Assembled
Part Number.
3.Machine, equipment or part on the free market (Example: P600356)
‘The number Is made up of 6 digits with "P" on the head represents th
‘of machine, equipment or part on the free market.
4.Blectrleal equipment or part on the free market (Example : 6900001)
The number Is made up of 6 digits with "MY on the head represents the number
of machine, equipment or part on the free market.
number
(3) APPLIED FROM SERIAL NUMBER
‘The applicable machine serial number Is indicated at the right head of the first page
of each manual. The part which has yemark shows that the part has been improved
and has been using from the Machine Serial Number.
(4) EXPENDABLE PARTS
Expendable parts are indicated by Amark on the head of part number.
(8) NOMENCLATURE
Parts names are indicated, Especially for the parts which are mentioned in the
manuals under Operation and Maintenance, we show after the name, the position
where the part should belong In order to familiarize with it,
Bxamplet
SPROCKET — Flour Dusting Drive
- The position where the part should
belong to.
Part Name
1X.0187.4-3Ruea/,
(6) COMPONENT PARTS OF AN ASSEMBLED PART
‘The component parts are listed after the name of assembled part with + + mark on
the head of the part name.
(7) arty
Q'ty are shown by the number of part which is used at each position for one
Bnorusting Machine.
For the components, the number 1s shown for each set of assembled part.
(8) ABBREVIATIONS
Abbreviations are shown In Table 2 in order to simplify words and phrases used in
this publication,
(9) SPEC
‘The column of SPEC. in the Parts List indleates the position of which part Is
changeable depending on the specifications and the position is indicated by symbols
such as Dit-A, Bi4-B, FI6-A,
Please refer to Table 3 for relation between the symbol and the specifications.
(10) NUMBER Uxxxxxx
In order to enlarge the production range Enerusting Machine, many interchangeable
parts are prepared by us and the "UXXXXXX" number shows correct selection
and usage of such parts,
SUPERSEDURE
(41) [MARK IN THE MARGIN
Tt ropresents that there Is correction for the line only.
(12) [MARK IN THE END OF THE MANUAL NUMBER,
It represents that there are corrections for the following cases:
1,One whole line Is eliminated in the page,
2,Part of Index Number which was printed In the page Is transferred into previous
or following page.
(13) DATE
Date shows a revision Is made on (11) or (12) In above.
Tx0187.4-4WEG
@
FIGURE 1 RULES AND CONTENTS OF ILLUSTRATION
1x-0187.4-5(4)
(2)
6)
Rey
(3)
TABLE 1 RULES AND CONTENTS OF LIST
®
Rueo/ a
59 Spua72e40 | .rnortus tae heats a 1
Go [rerio warn xa. 1
fa | azaen| son Lt
G_| rosa] “natn vse seu i
63 *P A511050 SER mnO@ 247]
a [eno] Lar :
6 | tee70| an nse, wo tacun 1] | seo, neo
6 | rena} s-mne 1] Jaw
fronts} str tao nace somo) se] [rene
6@ | rece) sar mao mci 051 (0) 3) faces ow
6 | ram ices neo our a) fers
to | ranas| rine one 2) Jane
xn | rors} sero oe 2) [3otns
ze remres} asc nso our 1] |e 0
> | rooee| mace war 1] a
14 | e099} ssaacr soc to on our 2] [mse
soos ‘nantin bse tt, 7 ws 1] | veo, ouBo
15, | paso] como ease t
16. | seo] comin 1
1 | sano] “nm crs :
ze |raeto] rare 1] | wons,oos0
nso] nse ane sr a] | wsea
1» | reois| -stesons wan nr r{ | mea
| recess] semis wen r| ne
af azrs| rua eso 1
2 |cosae| ‘oti no y
05. |eosaro|