Professional Documents
Culture Documents
305 Rocker Shaft 2
305 Rocker Shaft 2
Welcome: j210ss139
Product: MINI HYD EXCAVATOR
Model: 305.5E2 MINI HYD EXCAVATOR WE204823
Configuration: 305.5E2 Mini Hydraulic Excavator WE200001-UP (MACHINE)
POWERED BY C2.4 Engine
i05243591
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Illustration 1 g02725404
Note: Ensure that the pushrods are installed in the original location and that the pushrods
are seated in the valve lifters correctly.
2. Loosen nut (5) and the adjustment screw on each rocker arm to prevent bending a valve or a
pushrod during the installation.
5. Adjust the inlet valve lash and the exhaust valve lash to 0.18 to 0.22 mm
(0.007 to 0.009 inch). Refer to Testing and Adjusting, "Engine Valve Lash -
Inspect/Adjust".
End By:
Copyright 1993 - 2020 Caterpillar Inc. Sat Jul 04 2020 12:30:11 GMT+0800 (China Standard Time)
All Rights Reserved.
j210ss139
Private Network For SIS Licensees.