Professional Documents
Culture Documents
Ssab Astm A537 C2
Ssab Astm A537 C2
Ssab Astm A537 C2
Dimensions
Thickness Width 2) Length 3)
(Inches) (Inches) (Inches)
0.375- 2.00 1) 96- 123 240- 588
1)
inquire for thicknesses <0.375 in. down to 0.197 in. and for thicknesses >2.00 in. up to 3.60 in.
2)
Inquire for widths <96 in down to 60 in. and for widths >123 in. up to 131.9 in.
3)
Inquire for lengths <240 in. down to 73 in.
Mechanical Properties
Tensile Testing is performed in the transverse direction according to ASTM A20 requirements. The required mechanical properties are tabu-
lated below:
Grade Yield strength Tensile strength Elongation in 2”
(ksi) (ksi) (min %)
A537 Class 2 60 80- 100 22
Charpy V-Notch Impact Toughness requirements may be ordered as a supplementary requirement (S5). A minimum Charpy V-notch impact
energy value of 40 ft-lbs [54 J] at-40°F [-40°C] in longitudinal specimens is a typical supplemental impact toughness requirement. Please inquire
for applications requiring a specified minimum impact toughness.
Chemical Composition
(Heat Analysis, wt. %, maximum unless indicated)
Meets chemical requirements of ASTM A537 Class 2/SA537 Class 2, as shown. ASTM A20 limits apply to unspecified elements.
Tolerances
Thickness, width, and length tolerances for A537 Class 2/SA537 Class 2 are in accordance with ASTM A20 requirements. The flatness tolerance
for as-supplied product is ½ ASTM A20.
Delivery Conditions
ASTM A537 Class 2/SA537 Class 2 is supplied in the quench and tempered condition.
Formability Properties
A537 Class 2/SA537 Class 2 exhibits excellent cold forming characteristics. Shear burrs and heat-affected zones of thermal cut edges on or near
the bend axis as well as sharp corners on edges and on gas cut or punched holes located on or adjacent to the bend axis should be removed by
grinding prior cold forming. The following recommended minimum inside bend radius, R, and die width opening, W, as a function of bending
orientation are provided:
Thickness Bend Axis Perpendicu- Bend Axis Perpendicular Bend Axis Parallel to Bend Axis Parallel to
(in. [mm]) lar to Rolling Direction to Rolling Direction Die Rolling Direction Inside Rolling Direction Die
Inside Radius, R (min.) Width, W Radius, R (min.) Width, W
0.375 – 1.00 [9.5 – 25.4] 1.5t 8t 2.25t 10t
1.00 – 2.00 [25.4 – 50.1] 2.0 8t 3.0t 10t
Weldability
Welding of A537 Class 2/SA537 Class 2 shall be performed in accordance with applicable welding code. In the absence of a specified welding
code, the following minimum preheat and interpass temperatures and welding consumables are provided. Special welding consumables and
welding procedures may be required to avoid detrimental effects on the mechanical properties of the base metal. Low hydrogen practices are
strongly recommended.
Welding Process Thickness Minimum Preheat and Interpass Consumables
(in. [mm]) Temperature
(°F [°C])
Shielded Metal Arc (SMAW) ≤3/4 [≤19] 50 [10] AWS E7015-X, E7016-X, E7018-X
Shielded Metal Arc (SMAW) >3/4 – 1.5 [19 – 38] 50 [10] AWS E7015-X, E7016-X, E7018-X
Shielded Metal Arc (SMAW) >1.50 – 2.00 [>38 – 50] 150 [65] AWS E7015-X, E7016-X, E7018-X
Gas Metal Arc (GMAW) ≤3/4 [≤19] 50 [10] AWS ER70S-X
Gas Metal Arc (GMAW) >3/4 – 1.5 [19 – 38] 50 [10] AWS ER70S-X
Gas Metal Arc (GMAW) >1.50 – 2.00 [>38 – 50] 150 [65] AWS ER70S-X
Supplementary Requirements
By agreement between the purchaser and the plate manufacturer, the following Supplementary Agreements may be specified on the purchase
order: S1. Vacuum Treatment; S2. Product Analysis; S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons; S8. Ultrasonic Exami-
nation in accordance with A435; and S12. Ultrasonic Examination in accordance with ASTM A578.
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.ssab.com
For referenced ASTM standards, visit the ASTM website, www.astm.org. The information contained herein is only intended to provide guidance relative to SSAB’s capability to
supply products complying with the requirements of the referenced ASTM standards. The information contained herein is in no way a guarantee or warranty of SSAB product. In
the event of an order, the specifications as stated in the purchase order and any subsequent order acknowledgment establish the basis for any product specifications, require-
ments and/or guarantees.