Professional Documents
Culture Documents
Genuine Replacement Service Parts: Are Not Sure of Service Parts Required Please Refer To The Cylinder Assembly Print
Genuine Replacement Service Parts: Are Not Sure of Service Parts Required Please Refer To The Cylinder Assembly Print
Beveled
Cast Iron Beveled Threaded Gland Bearing
Piston Rings Overlap Collar Stop Ring Vee-Packing Ring
for Double Acting Cylinders Assembly
Vee-Packing Wiper
Stage Wave Spring Shims
Sleeve Ring
Non Beveled Bronze Internal
Piston Bearings Non Beveled Threaded
Single Acting Cylinders Overlap Collar Stop Ring Headnut
Note: Do not use a Beveled Threaded Stop Ring with a Non-Beveled Overlap Collar or vice-versa.
Bronze internal headnuts are used on both single and double acting telescopic cylinders.
Description 2.75" Stage 3.75" Stage 4.75" Stage 5.75" Stage 6.75" Stage 7.905" Stage 9.375" Stage
Vee-Packing Assembly 375-9009-017 375-9009-034 375-9009-018 375-9009-019 375-9009-020 375-9009-021 375-9009-022
with Shims AJ3009-27 AJ3009-37 AJ3009-47 AJ3009-57 AJ3009-67 AJ3009-79 AJ3009-93
Repair Kits
For Standard Commercial Hydraulics Single-acting, Dump Body Cylinders.
Commercial’s genuine replacement parts are available in kits to rebuild or repack our dump
body cylinders. These parts are the same as originally installed.
As with all hydraulic repairs, be sure your shop is properly equipped and that the work area is
clean.
Rebuilding kits consist of:
1. Wiper Rings 5. Piston Bearings
2. Packing Assemblies 6. Set Screws
3. Gland Bearing Rings 7. Nylon Balls
4. Wave Springs
Repacking kits consist of:
1. Wiper Rings 2. Packing Assemblies
Ordering Information
Please order by part number
Tools
Required
Proper tools make the job of
servicing cylinders easier
and faster and reduce the
possibility of damaging the
finely machined surfaces.
We recommend that you
have the tools shown on this Lifting Ring Stop Ring Wrench
BC3067 Series BA3067 Series
page prior to attempting Sleeve or Sleeve or Sleeve or
Main O.D. Eng # , Part Number Main I.D. Plunger O.D. Eng # , Part Number
ser vice on Commercial
WRENCH
SLEEVE OR PLUNGER
with an * are required for all 4 3/4" BC3067-2, 376-3067-009 4 1/4" 3 3/4" BA3067-2, 376-6067-048
STOP RING
cylinders regardless of size. 5 3/4" BC3067-3, 376-3067-010 5 1/4" 4 3/4" BA3067-3, 376-6067-049
Lifting rings and stop ring 6 3/4" BC3067-4, 376-3067-011 6 1/4" 5 3/4" BA3067-4, 376-6067-050