This document provides details on the drive gearbox for conveyor ZC01-FD001, including:
1) The drive has a 2.2 kW motor powering a pulley through a Sumitomo Cyclo gearmotor with a 473:1 ratio to achieve the required 3 rpm pulley speed.
2) The gearbox has a rated torque of 6170 Nm and an actual efficiency of 94%.
3) Additional specifications on shaft speeds, diameters, and gearbox mass are included.
This document provides details on the drive gearbox for conveyor ZC01-FD001, including:
1) The drive has a 2.2 kW motor powering a pulley through a Sumitomo Cyclo gearmotor with a 473:1 ratio to achieve the required 3 rpm pulley speed.
2) The gearbox has a rated torque of 6170 Nm and an actual efficiency of 94%.
3) Additional specifications on shaft speeds, diameters, and gearbox mass are included.
This document provides details on the drive gearbox for conveyor ZC01-FD001, including:
1) The drive has a 2.2 kW motor powering a pulley through a Sumitomo Cyclo gearmotor with a 473:1 ratio to achieve the required 3 rpm pulley speed.
2) The gearbox has a rated torque of 6170 Nm and an actual efficiency of 94%.
3) Additional specifications on shaft speeds, diameters, and gearbox mass are included.
Project EPCC TSL AUSMELT Client PT. TIMAH Tbk. Project No. Prepared By ISK Conveyor No. ZC01-FD001 Design Date
Drive No. 1 Drive Pulley No. 3
Drive Description Head Motor Power Rating 2.2 kW Number of Motors on Drive Pulley 1 Motor Full Load Speed 1420 rpm Selection Mode Manual Motor Torque @ FL Speed 15 Nm Gearbox Category Sumitomo Drive Motor Torque at Pulley Speed 7195 Nm Gearbox Description Cyclo Gearbox Rated Torque 6170 Nm Type Cyclo Gearmotor Service Factor Required 1.4 Size CHHM 3 6225DA Service Factor Calculated 0.86 Code CHHM Plus Speed Selection Tolerance 5 % Ratio 473 Minus Speed Selection Tolerance 5 % Number of Stages CHHM Fluid Coupling Slip 0 % Design Efficiency (Input) 95 % Required Gearbox Ratio 486.256 :1 Gearbox Actual Efficiency 94 % Selected Gearbox Ratio 473 :1 Maximum Input Shaft Speed 1500 rpm Required Pulley Speed 2.92 rpm Minimum Input Shaft Speed 1000 rpm Calculated Pulley Speed for Reducer 3 rpm Input Shaft Diameter 0 mm Required Belt Speed 0.1 m/s Output Shaft Diameter 120 mm Calculated Belt Speed 0.1 m/s Gearbox Inertia kg-m2 Mass of Gearbox 451 kg