Professional Documents
Culture Documents
Accessories Performance Guide
Accessories Performance Guide
SPECIFICATION
l
Body and frame in strong pressure
die-cast LM6M high corrosion
resistance aluminium. Textured
black full polyester powder finish
l
Cover frame retained on two stainless
steel safety chains
l
Covers in prismatic polycarbonate
or 9mm thick (nominal) thermally
shock resistant borosilicate glass
l
Fixings outside gasket line to preserve
IP rating
l
Clip-on nylon coated steel wire
guard available
l
Optional photocell control
l
Tamper-resistant cover screws available
l
Complies with M.O.D. JSP482 Chapter 8 RANGE
Document for ‘Category C’ areas
(up to 70W) APPROX. PHOTOCELL
LAMP CAT. No. kg OPTION APPROVED
l
BSI Kitemarked and ENEC
approved versions 24W LED PL 14898L 6.6
LED Version 38W LED PL 14900L 6.6
l
High power white LEDs 200W (max.) GLS PL 6294 5.6 100W (max.) H
80W MBF PL 6234 7.7 H
l
Aluminium gear tray with LED
GLASS COVER
PHOTOMETRIC GUIDE
120 140 80 80
AXIAL
120 140 80 80
AXIAL
CANDELAS PER 1000 LUMENS CANDELAS PER 1000 LUMENS CANDELAS PER 1000 LUMENS CANDELAS PER 1000 LUMENS
Luminaire Lumen Output Luminaire Lumen Output Luminaire Lumen Output Luminaire Lumen Output
24W = 1520lm 24W = 1650lm 16W = 1480lm 16W = 1400lm
38W = 2060lm 38W = 2240lm
PRISMALUX - PRISMALUX -
LED VERSION - LED VERSION -
POLYCARBONATE COVER GLASS COVER
TRANSVERSE AXIAL TRANSVERSE AXIAL
60 140
60 80
120 160
180 240
240 320
DIMENSIONS
210 210
270
1 x M20 ET
tapped hole
at each end. 1 x M20 ET
One end tapped hole
plugged Fixing points: 4 x 7mm dia. holes Fixing points: 4 x 7mm dia. concealed at each end.
Fixing points: 4 x 7mm dia. concealed
on 205mm centres and holes on 290 x 150mm centres One end plugged
holes on 290 x 150mm centres
1 central BESA box fixing
Rear entry: 1 x 20.6mm dia. hole (plugged)