Professional Documents
Culture Documents
Directional Control Valves English Imperial E215
Directional Control Valves English Imperial E215
Shown: VP-12
Solenoid directional valves Pressure: 5000 psi
product line
Collet-Lok®
• Dual poppet valve design for zero Max. Flow: 915 in3/min
internal leakage
• Inlet check-valve standard E Válvulas de control
• High cycle switching F Electrodistributeurs
• Stackable to 8 valve stations high D Wegesitzventile
Swing clamps
99_017
Application
5.59
131
Power sources
73
VP-series
2.36
.47
43
3.62
0
Valves
at 50/60 Hz
t 4/3 Closed center
24 VDC @ 1.13 A VP-11 A B 1x Dbl-act.
110 VAC @ 500 mA VP-12 1x Dbl-act.
P T
t 4/3 Float center
24 VDC @ 1.13 A VP-21 A B 1x Dbl-act.
z Enerpac VP-series valves
mounted on -12 manifold, 110 VAC @ 500 mA VP-22 1x Dbl-act.
mounted on a ZW-series P T
workholding pump. t 3/2 Normally closed
24 VDC @ 1.13 A VP-31 1x Dbl-act. / 2x Sgl-act.
110 VAC @ 500 mA VP-32 1x Dbl-act. / 2x Sgl-act.
Note: DIN 43650 electrical connector included. Valve weight 6.5 lbs (3,0 kg.).
136 ®
2-position poppet valves VA, VS, VD-series
Shown: VST-1401D, VSS-2210D
Zero leakage poppet valves Pressure: 0-5000 psi
increase efficiency
product line
Collet-Lok®
to power source
D Elektromagnetische Ventile
• Air operated models eliminate need for electricity
• Including O-rings and mounting bolts A B A B PTBA
G
• SAE manifold ports simplify plumbing P T PTBA
P T
• Inline check valve provides positive load holding
Work supports
99_111
Options
D03 Manifolds
VSS, VST-series
MB-series
Solenoid and air piloted VAS/VAT
directional control valves. Poppet 144 ▸
5.25
design for zero leakage promote .25
Linear clamps
1.30
1.00
decreasing internal valve leakage.
194 ▸
Application
2.06
2.00
Advance and retract for single- Important
and double-acting cylinders.
2.00
Power sources
separately.
5.93
VST VD1P
3.04
2.00
MB-1 manifold.
1.58
To be ordered separately. B
Inline check valve
A
5.93
A B
Product selection
Valve flow path Solenoid Model Hydr. Pressure Pressure Max.
z VSS-2210D mounted directly voltage number symbol range drop 1) oil flow
@ current
on a Turbo II air pump for use on
positive clamping fixture. at 50/60 Hz psi psi in3/min
t Solenoid poppet valves – Normally open
4-way, 2 position 60-100 psi max. VAS-0710D A B 0-5000 180 690
4-way, 2 position 24VDC @ 1.60 A VSS-1410D 0-5000 180 690
P T
4-way, 2 position 115VAC @ .40 A VSS-2210D 0-5000 180 690
t Solenoid poppet valves – Normally closed
4-way, 2 position 60-100 psi max. VAT-0710D A B 0-5000 180 690
4-way, 2 position 24VDC @ 1.60 A VST-1410D 0-5000 180 690
P T
4-way, 2 position 115VAC @ .40 A VST-2210D 0-5000 180 690
t Inline check valve
PTBA
– – VD1P G 0-5000 0 690
99_121
PTBA
1)
Pressure drop from P-A or P-B at maximum oil flow of 690 in3/min.
140 ®
Solenoid spool valves, D03/CETOP3 VE-series
Shown: VEX-11 valve
D03 Direction Valve and Pressure: 0-5000 psi
accessories
product line
Collet-Lok®
Options
VEW-11
D03 Manifolds
4.59 MB-series
Work supports
144 ▸
99_111
3.64
1.97
VE-series Fittings
Spool style solenoid valves and 3.02
control modules are used in 6.25 194 ▸
circuits that do not require zero
Important
Linear clamps
double acting cylinders. The dual check module. Do not use D03
1.97
4.88
Pin 8.00
2.02
0.05
Open 2.25
Spacer
Product selection
Valve flow path Solenoid Model Hydraulic Pressure Pressure Maximum
voltage number symbol range drop oil flow
50/60 hz
FT21 pump.
3-position/4 way, 24 VDC VET-11 A B 0-5000 150 8
Closed center 1.32 Amps P T
A P T B
A P T B
Pressure reducing valve – PRV-6 / 435-4350
– 3
PRV-7 75-2000
142 ®
VMM, VMT-serie Manual valves, D03/CETOP3
Shown: VMMD-001, VMTD-001
Pressure: 5000 psi Manual control of single and
double-acting cylinders
Flow: 1040 in3/min
• Near zero leakage pressure seal design
E Válvulas de control de 4 vias • 4-way, 3-position
F Distributeurs à 4 voies • Detented handle positions
D 4-Wege-Ventiler • Low handle effort 12 lbs, even at
full pressure
99_102
VD1P, Inline check valve
VMM and VMT-series
Manual directional control valves
◂ 140
for single- and double-acting
cylinder control. Lapped pressure
D03 Manifolds seal surface provide near
zero leakage.
144 ▸ The VMTD series has threaded
port connections and removable
Hoses and holding bracket for panel
couplers mounting.
192 ▸ Application
Panel mounting on fixtures for
Fittings control of individual circuits. The
blocked pressure port in the
center position allows demand
194 ▸ VMTD-001, 003 VMMD-001, -003 style pumps to stall out, saving
1.75
energy.
Important .28 1.59 The valves require check valves
Valves
for positive load holding.
For multiple circuit
applications, the VD1P inline
1.38
2.03
2.03
1.22
Pallet components
3.13 1.96
See page 145 for mounting
bolt information. 1.375-14UN
4.44
3.88
2.34
System components
Pressure on return side (tank)
.44
1.78
SAE #4
7/16"-20UN (4x) mounted on fixture waiting to be
#10-24UNC transferred to machine.
Product selection
Valve Mounting Oil Model Hydraulic Pressure Pressure Max.
Yellow pages
VE-series
Linear clamps
Application
Power sources
Product spefications
Pressure Maximum Voltage @ Hz Amperage draw
range oil flow
Amps
psi in3/min inrush holding
0-10,000 920 24 VDC @ 50/60 Hz – 2.5
0-10,000 920 115 VAC @ 60 Hz 3.6 1.0
0-10,000 920 220/240 VAC @ 50 Hz 1.3/1.4 .45/.53
0-10,000 920 230 VAC @ 60 Hz 1.8 .50 A
Note: Seal material: Buna-N, Polyurethane.
DIN43650 Valve plug included on remote mounted valves.
146 ®
Dimensions & options VE-series
Custom build your modular valves Pressure: 0-10,000 psi
▾ This is how a Solenoid Modular Valve Model Number is built up: Flow max.: 920 in3/min
A AB
Valves
operated check valve to
convert 3-way VE-valve into
Example load-holding valve.
Pallet components
operated check valve to
flowpath, 115 VAC, and an integrated convert 4-way VE-valve into
pilot-operated check valve, for load-holding valve.
mounting on an Enerpac pump.
To install accessory valves to
Bolt Kit BK-2 is included.
stack build modular valves
use bolt kits:
System components
BK-2 for 1 VS valve;
VE series Modular Valve Modular Valve BK-3 for 2 VS valves.
Pump Mounted Remote Mounted
T P
Diferential pressure drop (psi) u
P-A/B
Yellow pages
A/B-T
Gauge port
6.40 1)
1/4"-18NPT 2.09
200
A B
1.15
3/8"-18NPT (2x)
1.00
3.48 5.39 0
0 1.0 2.0 3.0 4.0
1.75 Oil flow (gal/min) u
add 1.85 inch for each Accessory Valve.
1)
www.enerpacwh.com ® 147
3-way directional manual control valves Application & selection
Shown: VM-2, VM-3
Reliable control of
single-acting cylinders
product line
Collet-Lok®
P T
locking
P T
A
Closed center, Remote VC-15L
locking
99-123
P T
148 ®
Dimensions & options V-series
VM-2 Pressure: 0-10,000 psi
5.12 Flow max.: 1040 in3/min
E Vàlvulas de control
3/8"-18NPT
F Distributeurs à 3 voies
5.25
ø.34 (6x)
1.12 .62 D 3-Wege-Ventile
.81
1.44 1.88 1.12 A
.38 5.00 2.50 A
5.75 3.25
P T
PT
3/8"-
7.19 1)
7.25 1)
18NPT 5.69
5.75
1.58
1.50 1)
1)
1.50
.87
.75
Options
2.50 1.75 1.88 .69 1.38 Gauges and
3.00 3.00 accessories
3.56 5.00
.50 ø .34 (5x) 5.75 1/4"-20UN (2x) 4.49 1)
190 ▸
3/8"-18NPT
1)
VM-3L only 1)
VC-3L and VC-15L only
Hoses and
couplers
Product specifications 192 ▸
Model Pressure Used for Schematic flowpath
number range cylinder Fittings
Valves
Advance Hold Retract
psi lbs 194 ▸
t Manual 3-way, 2-position (3/2)
VM-2 0-10,000 Single-acting – 4.8
A A
Important
Pallet components
P P T
Locking Valves
System components
provides hydraulic locking of
t Manual 3-way, 3-position (3/3) the load until valve is shifted
VM-3L 0-10,000 Single-acting 8.6 into retract position.
A
To order this feature,
P T
place an “L” at the end
VC-3L 0-10,000 Single-acting 10.3 of the model number.
Yellow pages
P P P T
Valving help
VC-15L 0-10,000 Single-acting 10.3 See Basic System Set-up and
A A A
Valve information in
P P P T
our “Yellow Pages”.
197 ▸
www.enerpacwh.com ® 149
4-way directional manual control valves Application & selection
Shown: VC-20, VM-4
Reliable control of
double-acting cylinders
product line
Collet-Lok®
Manual operated 4-way, 3-position directional control between ports when ports blocked in the
valves for operation of double-acting or two single-
shifted. center position.
acting cylinders. Remote mount valves include return
line kit for connecting the valves to pump reservoir.
Pump mounted valves provide centralized control of • For positive load holding • For one or multiple cylinder
pump output for cylinder cycling. Remote mounted at without loss of pressure. operation. Pump flow is
any convenient point along the system where control Cylinder travel can only directed back to tank in
of cylinders is needed.
resume by shifting valve the center position.
from hold position.
Valves
Product selection
Valve type Valve Model Hydraulic
mounting number symbol
location
z Enerpac VC-4 manual valves mounted to control Tandem center Remote VC-4 PT
hydraulic circuit on pallet fixture
Tandem center, Pump VM-4L A B
locking
P T
locking
99-120
PT
150 ®
Dimensions & options V-series
Pressure: 0-10,000 psi
E Vàlvulas de control
F Distributeurs à 4 voies
D 4-Wege-Ventile
A B
AB
PT
PT
Options
7.25 1)
5.75
Gauges and
7.19 1)
3/8"-
5.69
18NPT accessories
1.50 1)
1.50 1)
.87
190 ▸
1.58
Valves
194 ▸
Product specifications
Important
Pallet components
Model Pressure Used for Schematic flowpath
number range cylinder
Locking Valves
For applications that require
psi Advance Hold Retract lbs positive load holding, most
t Manual 4-way, 3-position (4/3) VM and VC valves are
available with pilot operated
VM-4 0-10,000 Double-acting 4.6
check valve. This option
System components
provides hydraulic locking of
VC-4 0-10,000 Double-acting 6.4
the load until valve is shifted
into retract position.
VM-4L 0-10,000 Double-acting 8.6 To order this feature,
place an “L” at the end
of the model number.
VC-4L 0-10,000 Double-acting 10.3
Yellow pages
B B
Valving help
B
See Basic System Set-up
VC-20L 0-10,000 Double-acting A A 10.3
A
and Valve information in
P T P T P T
our “Yellow Pages”.
B B B
197 ▸
www.enerpacwh.com ® 151
Accessory valves Application & selection
Shown: HV-1000A, V-17, V-10, V-12, V-152
Your hydraulic control solution
product line
Collet-Lok®
Product selection
Valve type Maximum Model Oil
pressure number ports
Work supports
99-086
Enerpac accessory valves are available in a wide Holding valve, air pilot 3000 HV-1000A 1/8" NPT
variety and many configurations to control hydraulic Holding valve, modular 3000 MHV-1 1/8" NPT
pressure or oil flow. These valves are used in Pressure limiting valve 3000 PLV-40013B 1/8" NPT
conjunction with other valves and system components
Linear clamps
Accessory valves are used to automate clamp cycles, Pressure relief valve 10,000 V-152 3/8" NPT
prevent pressure loss and provide additional operator
and component safety. Product specification
Power sources
HV-1000A
Air pilot holding valve P A
• Holds fluid under pressure
offering independent control
of different branches of the 4.34
same fixture 2.25
1/4"-18 NPT
sequence
• Max. oil flow 305 in3/min 1/8"-
Air inlet
27NPT
• Works with the VA-42 four- .28
1.88
way air valve and a booster
A
2.00
1.00
MHV-1 P
Modular holding valve
A
z V-17 Safety check valve installed on a fixture. • Allows separate operation of clamping
fixtures with a single power source
• Ideal for applications
when fluid feed lines are 5.06
impractical. If system .75
.28
pressure is interrupted,
the MHV-1 will hold the
1.38
.92
1/8"- 27 NPT
1.38
99-122b
156 ®
Dimensions & options MHV, HV, PLV, V-series
Pressure: 0-10,000 psi
PLV-40013B 3.50 Flow max.: 305-1830 in3/min
Pressure limiting valve .68
A P
• Allows precise control of pressures E Válvulas de control
P
reaching specific clamps
1.50
F Valves de contrôle
• When pressure build-up reaches
a preset level, the valve closes, D Regelventile
stabilizing pressure to that section of the fixture Adjustable pressure screw
.28
1.50
.75
P A
A
1/8"-27NPT (2x) 1.20
V-12
5.10
Manual shut-off valve
• Ball type valve can be used for the
master system shut-off or for isolating
2.31
separate circuits on a fixture
• Viton seals standard
• Straight through design for easy system
plumbing and installation 1.38
.49
.98 2.66
• Fully open allows high flow return of oil SAE #4 .437-20UNF
• Max. oil flow 732 in3/min
Valves
158 ▸
Gauges
V-17 Safety check valve 4.00 and adaptors
Pallet components
• Ruggedly built to resist shock and
190 ▸
1.25
192 ▸
System components
Fittings
V-152 Pressure relief valve
7.62 max
• Limits pressure developed by the ø 1.50 1.53 194 ▸
pump in hydraulic circuit, thus
3.12
± 3% repeatability 4.53
3/8" -18NPT (3x)
Important
• Valve opens whenever preset
pressure is reached. To increase pressure setting, Valving help
turn handle clockwise
See Basic System Set-up
• Max. oil flow 1830 in3/min and Valve information in our
• Includes 3 ft. return line hose kit “Yellow Pages”.
197 ▸
www.enerpacwh.com ® 157