Bogurkl SLA Le Aut Latl ae paid
UNIVERSAL INSPECTION CO.WLL.
C.R.No 2111877 VNVAV Ys Cage
INSTRUMENT & EQUIPMENT CALIBRATION DIVISION
CERTIFICATE NO: UIC /QAT/2851
certifies that the instrument below has been tested/calibrated
equipment traceable to National/International Standards or verified by
ratio type measurements using self calibrating techniques.
Information on the calibration process and the results are produced below
and given in the accompanying sheets of this document.
All related traceable documents are on file at UNIVERSAL
INSPECTION CO.WLL. and may be examined on request
Customer FERNAS CONSTRUCTION CO
Address MESAIEED,STATE OF QATAR
Descripti PIPE LINE & CABLE LOCATOR
Manufacturer RADIODETECTION
Model RD8100,
‘Transmitter Sl.No 10/81PDLG-2304
Receiver SI.No 10/TX-108-14905 Receipt Date (04-Nov-20
1D. No, N/A Calibration Date 5 04-Nov-20
Location Calibration Lab (Qatar) Calibration Due Date 2 03-Nov-21
‘The instrument was calibrated using the following reference, maintained at UIC Instrument &
Equipment Calibration division conforming to ISO 17025 requirements.
Reference Standard Equipment Used
Description Cert. No. Serial No Due Date
Multi Function
Calibrator
6-12 Digital
Multimeter
02/44(2019-2020) 201803486 06-Feb-21
2020010002, 4093003 19-Feb-21
By
Calibration Engineer x Quality/ Lab Manager
‘The measurement results. ¥4 instrument calibrated
‘This certificate andthe attached measurement result sheets produced except in full without the prior permission
Bullding No : 44, Unit No : A2, Zone: 56 0 Mila «AD # Bang sf tH she
Street No : 205, Ain Khalid St. Salwa Road, Qatar gale Bb MS ge Ek Te Bee
Mob: 2978 66836251 : AVE aN YeN digs
E-mall: qt@icom.ge UIC-QP-7.8:24 FO2, REVO Werwauiscom.aaUNIVERSAL INSPECTION CO, WLLL. Sagal! GLA Ole sd Adlets p31
CERTIFICATE NO: UIC/QAT/2851
Performance Test Data
Physical Check, Inspection, Functional Check:
‘The Pipeline & Cable Locator has been tested for its functionality, and found sati
Function Tested Requirements Results
1. Cable Locator Performance Test
Power ON Performing self test. Display model and ¥
Software version.
PIPELINE & CABLE LOCATOR APPLICATION
‘Transmitter:
‘Transmitter Power Check Pass
= Pulsed Signal Check Pass
= Continuous Signal check Pass
= Low Output Signal Strength check Pass
= High Output Signal Strength check Pass
= Locate Frequency (18Hz) Check Pass
Voltage Reading: up to 400v AC/OC sov Pass
100v Pass
200v Pass
300V Pass
Receiver
Receiver Alarm Check Pass
Receiver Battery Pass
Power Network (50 -60 Hz) feck Pass
Radio Mode (15 Hz & 23,UNIVERSAL INSPECTION 00, WiLL. Bagelont! ha Cole) Butlatl AS Zit
CERTIFICATE NO: UIC/OAT/2851
Detection Accuracy:
+ Locating Depth Cable Check Pass
General Information about the testing:
“The Pipeline & Cable Locator has been tested on the functions of Frequency, Voltage & Pulse.
During the testing the ambient temperature was 23.3 °C and the relative Humidity was 49.3 % RH.
‘Comments:
“The results reported in this certificate refer to the condition ofthe instrument on the date of
testing and cary no implication regarding the long-term stabilty of the instrument,
Traceabili
‘The reported tests were undertaken using equipment detailed below for which the company
Ingintain traceablity fo the NIST via SASSCO Certifeation.
Calibration Engineer Quality/ Lab Manager