Professional Documents
Culture Documents
American Standard
American Standard
Description
Adria/Sophia wash basin 62x48,5 cm, central tap hole punched, 2
semi pre-punched outer tap holes.
Recommended equipment
Products
Ceramic
Adria/Sophia floor standing pedestal.
Product Article-No.
Recommended equipment
Pedestal E740001
Semi Pedestal E749201
Finishes
01 White
G 0862 .. G 0855 ..
177
Article Number B0704
CERAPLAN III
One-hole basin mixer Grande
handle
KEY FEATURES & BENEFITS
Perlator aerator
Metal pop-up waste
Flexible hoses G3/8” for water supply system connection
Comply with EN817
VARIANTS
Description
!"
#
$
%
&'()*
+
$
,-(
.
/
%
&'()*
+
$
,-(
chrome.
2
3
4
.
67
Recommended equipment
Regulator that provides a maximum 1,7lt/min flowrate.
8
9 .
Product Article-No.
Recommended equipment
Regulator 1,7lt/min F960848AA
Thermostatic kit A5776AA
Finishes
Bathroom
Fittings
AA Chrome
15° 15°
116 116
138
138
112
112
Ø 58 Ø 58
max. 30
max. 30
434
max. 445
2000
434
G3/8 G3/8
A 6145 .. A 6146 ..
515
P Trap
5611 1.25
Brand Name Viega
Unit Name P Trap
Color Chrome Plated
Description "P" Trap 1-1/4/"x1-1/4" and 1-1/2"x1-1/2"
Dimensions 1-1/4/"x1-1/4" and 1-1/2"x1-1/2"
Description
Angle valve G1/2“ x G1/2“, without nut, chrome.
Product Article-No.
Finishes
AA Chrome
Bathroom
Fittings
X0313..
X0314..
X0315..
470
AFWALL® MILLENNIUM™ FloWise®
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA LESS EVERCLEAN ®
BARRIER FREE
M119
© 2014 AS America Inc. Rev. 2/14
AFWALL® MILLENNIUM™ FloWise®
ELONGATED FLUSHOMETER TOILET
VITREOUS CHINA LESS EVERCLEAN ®
BARRIER FREE
2257.101/2633.101
660mm
(26")
356mm
470mm (14")
(18-1/2") (4) Ø 22mm
(7/8") HOLES
229mm
381mm (9") 191mm
(15") (7-1/2")
333mm
(13-1/8")
133mm
(5-1/4")
41mm FINISHED
(1-5/8") FLOOR
2634.101
FINISHED WALL 356mm
(14")
660mm
(26") (4) Ø 22mm 90mm
(7/8") HOLES (3-9/16")
470mm
(18-1/2")
321mm
(12-5/8")
281mm
229mm (11-1/16")
381mm (9") 191mm
(15") (7-1/2")
333mm
(13-1/8")
133mm
(5-1/4")
41mm FINISHED
(1-5/8") FLOOR
NOTES:
● Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.
PRODUCT 2257 SHOWN, 2366 SAME EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).
SUGGESTED 2mm (1/16) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages
M120
© 2014 AS America Inc. Rev. 2/14
COMMERCIAL HEAVY-DUTY
PLASTIC TOILET SEAT
MODEL # COLOR #
95CT/95SSCT _______
DESCRIPTION:
Open front less cover, elongated, heavy-duty, injection molded solid
plastic toilet seat. Features four molded-in bumpers, non self-sustaining
(95CT) or self-sustaining (95SSCT) check hinges with non-corrosive
300 Series stainless steel posts and pintles and STA-TITE Commercial
®
SPECIFICATIONS:
Size: Elongated
Material: Plastic
Style: Open Front less Cover
Bumpers: Four
Hinges: Plastic Non Self-Sustaining (95CT) or Self-
Sustaining (95SSCT) with 300 Series Stainless
Steel Posts and Pintles
Fastening System: STA-TITE Commercial Fastening System™
®
FEATURES:
STA-TITE Commercial Fastening System™
®
5-1/2"
2-5/8"
3-3/16" 1"
14-5/16" 1-1/4"
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 Phone: 800-558-7651 Fax: 800-292-3647
www.ToiletSeats.com ©2014 0B7012307 REVB
Royal® Flushometer
111-1.28
► Code Number
3910168
► Description
Exposed Water Closet Flushometer, for floor mounted or wall hung
top spud bowls.
► Flush Cycle
1.28 gpf/4.8 Lpf
► Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Closet
Flushometer for left or right hand supply with the following features:
● PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed
Bypass
● Spud Coupling and Flange for 1½” Top Spud
● Sweat Solder Adapter with Cover Tube & Cast Wall Flange with
Set Screw
● Non-Hold-Open Handle, Fixed Metering Bypass and No External
Volume Adjustment to Ensure Water Conservation
● Flush Accuracy Controlled by CID Technology
● Diaphragm, Handle Packing and Vacuum Breaker to be molded
from PERMEX® Rubber Compound for Chloramine Resistance
● 1” I.P.S. Screwdriver Bak-Chek® Stop with free spinning vandal
resistant stop cap
Valve Body, Cover and Tailpiece shall be in conformance with
ASTM Alloy Classification for Semi-Red Brass. Valve shall be in
compliance to the applicable sections of ASSE 1037.
● ADA Compliant Metal Oscillating Non-Hold-Open Handle
► Fixtures
Consult factory for matching Sloan brand fixture options.
Al Ghamdi Co.
P.O. Box - 3988, Jeddah -21481, KSA 08-Mar-2017
Tel : 02-6696263, Fax: 02-6612994. Page 1 of 1
Email: ghamdijed@amghamdi.com
* All information of the above is the reference only. No prior notice is made if any changes.
Article Number J5019 01+ J4903 01
Description
Playa wall hung bowl.
Water saving with flushing water capacity at 6/3 or
4.5/3 lt.
Necessary equipment
142
23
Application purposes
•
Actuation force < 20 N
142
26
Application purposes
•
Actuation force < 20 N
142
39
Application purposes
•
Actuation force < 20 N
122
Trigger Sprays IdealSpray
Description
IdealSpray trigger spray shower set consisting of brass trigger spray,
with maximum 4 lt/min flow rate (integrated regulator), brass
trigger control handle, ABS fixed wall bracket and 1250 mm double
clenched hose, chrome
Recommended equipment
Cross handle angle valve G1/2’’, chrome
Product Article-No.
Recommended equipment
Angle valve G1/2’’, cross handle A5179AA
Angle valve G1/2’’ x G1/2’’ Z8148AA
Finishes
Bathroom
AA Chrome
Fittings
66.5
Ø22
63
36
23.5
G1/2
583
SURFACE-MOUNTED
WWW.BOBRICK.COM
SOAP DISPENSER B-2112
Technical Data
gg
MM &INISH &ACE OF 7ALL
3 3 3 &ILLER
4OP W
#ONCEALED
3
2ECOMMENDED -OUNTING (EIGHT /FF &LOOR
7ALL 0LATE
&OR 5NIVERSAL "ARRIER
&REE $ESIGN
gg
7INDOW MM
3
gg MM
0USH "UTTON
3POUT
gg
Patented MM
gg
MM
MATERIALS:
Container — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Body is drawn, one-piece, seamless
construction. Back plate has mounting bracket attached. Furnished with concealed wall plate. Equipped with an unbreakable,
clear acrylic soap refill-indicator window and a locked, hinged stainless steel lid for top filling. Capacity: 40 fl oz (1.18 L).
Valve — Black molded plastic push button and spout. Soap head-holding mushroom valve. Stainless steel spring. U-packing
seal and duckbill. Corrosion-resistant to most soaps and detergents. CAUTION: Valve does not dispense antibacterial soaps.
OPERATION:
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve is operable with one hand,
without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with
barrier-free accessibility guidelines (including ADAAG in U.S.A.). Window indicates when refill is required. The locked,
hinged lid opens for top filling only with special key provided. Concealed, vandal-resistant mounting.
INSTALLATION:
Secure wall plate to the wall with three sheet-metal screws, furnished by manufacturer, at points indicated by an S. Slide
mounting bracket of container down onto wall plate and secure unit with furnished locking-screw. For plaster or dry wall
construction, provide concealed backing to comply with local building codes and secure with sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
Note: Surface-mount the dispenser plumb and true with valve 6'' (150mm) to right or left of lavatory center. Provide 4''
(100mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44"
(1120mm) maximum above the finish floor.
SPECIFICATION:
Surface-mounted soap dispenser shall be type-304 stainless steel with satin finish. Corrosion-resistant valve shall dispense
commercially marketed all-purpose hand soaps. Valve shall be operable with one hand and with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Container shall be equipped with
a clear acrylic soap refill-indicator window; a locked, hinged stainless steel lid for top filling; and shall have a capacity of 40
fl oz (1.18 L). Unit shall have concealed, vandal-resistant mounting. Manufacturer’s service and parts manual shall be
provided to the building owner/manager upon completion of project.
Surface-Mounted Soap Dispenser shall be Model B-2112 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 9/04 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2004 by Bobrick Washroom Equipment, Inc.
SURFACE-MOUNTED B-680
Technical Data SOAP DISH B-6807
Specify Model Required: ! Model B-680 Bright polished stainless steel
! Model B-6807 Satin-finish stainless steel
4-1/4''
110mm 3-3/8'' Finish Face
85mm of Wall
MATERIALS:
Flange and Support Arm — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless
steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.
Concealed Wall Plate — 18-8 S, type-304, 16-gauge (1.6mm) stainless steel.
Soap Dish — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction. Welded to the
support arm. Two drain holes and two ridges to support bar of soap.
INSTALLATION:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are
at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage flange onto
prongs of wall plate, then secure into position by tightening setscrew at bottom.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted soap dish shall be type-304 stainless steel with __________ (insert one: bright polished or satin) finish.
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that
is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew. Drawn, one-piece, seamless, 22-gauge
(0.8mm) soap dish shall be welded to the support arm and shall have two drain holes and two soap-support ridges.
Manufacturer's service and parts manual shall be provided to the building owner/manager upon completion of project.
Surface-Mounted Soap Dish shall be Model __________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/02 R/A, S/C Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2002 by Bobrick Washroom Equipment, Inc.
SURFACE-MOUNTED B-672
Technical Data DOUBLE ROBE HOOK B-6727
Specify Model Required: q Model B-672 Bright polished stainless steel
q Model B-6727 Satin-finish stainless steel
2-5/16''
4'' 60mm
105mm
1/2''
2'' 13mm Finish Face
50mm of Wall
Typ.
MATERIALS:
Flange and Support Arm — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless
steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.
Concealed Wall Plate — 18-8 S, type-304, 16-gauge (1.6mm) stainless steel.
Cap — 18-8 S, type-304, 10-gauge (3.6mm) stainless steel. Welded to the support arm.
INSTALLATION:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are
at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket
onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted double robe hook shall be type-304 stainless steel with __________ (insert one: bright polished or satin)
finish. Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting
bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew. Cap shall be 10 gauge
(3.6mm), welded to the support arm. Manufacturer’s service and parts manual shall be provided to the building
owner/manager upon completion of project.
Surface-Mounted Double Robe Hook shall be Model ________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment of Canada Ltd., Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and
Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 1/98 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 1998 by Bobrick Washroom Equipment, Inc.
SURFACE-MOUNTED B-7672
Technical Data DOUBLE ROBE HOOK B-76727
Specify Model Required: ¨ Model B-7672 Bright polished stainless steel
¨ Model B-76727 Satin-finish stainless steel
3-15/16'' 1-7/8''
100mm 50mm Finish Face
2'' 1/2'' of Wall
50mm 13mm
Typ.
MATERIALS:
Flange & Support Arm — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 18-gauge (1.2mm) stainless steel
mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.
Concealed Wall Plate — 18-8 S, type-304, 19-gauge (1.0mm) stainless steel.
Cap — 18-8 S, type-304, 14-gauge (2.0mm) stainless steel. Welded to the support arm.
INSTALLATION:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are
at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket
onto prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws
furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can
be secured.
SPECIFICATION:
Surface-mounted double robe hook shall be type-304 stainless steel with __________ (insert one: bright polished or satin)
finish. Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting
bracket that is secured to a concealed, 19-gauge (1.0mm) wall plate with a stainless steel setscrew. Cap shall be 14 gauge
(2.0mm), welded to the support arm. Manufacturer's service and parts manual shall be provided to the building
owner/manager upon completion of project.
Surface-Mounted Double Robe Hook shall be Model __________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment of Canada Ltd., Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/99 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 1999 by Bobrick Washroom Equipment, Inc.
SURFACE-MOUNTED
SINGLE-ROLL B-6699
Technical Data
TOILET TISSUE DISPENSER
WITH HOOD
B-66997
Specify Model Required: G Model B-6699 Bright polished stainless steel
G Model B-66997 Satin-finish stainless steel
Finish Face of Wall
6-3/16''
155mm
2-3/4''
70mm
2''
50mm w
22'' 560mm
3-1/16''
80mm
Hood
4-/18'' Spindle
105mm
MATERIALS:
Shell and Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with two
countersunk mounting screw holes.
Skirt — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction.
Support Posts (2) — Heavy-duty cast zamak with chrome-plated finish.
Hood — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. Hood hinged to shell.
Spindle — Chrome-plated plastic equipped with heavy-duty internal spring.
Designer's Note: Theft-resistant toilet tissue spindle, which is removable only with special key provided, is available as an
optional accessory. To specify, add suffix .60 to model number. Example: B-6699.60.
INSTALLATION:
Mount unit on wall or toilet partition with two sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nut, and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted toilet tissue dispenser shall be type-304 stainless steel with __________ (insert one: bright polished or
satin) finish. Skirt shall be 22 gauge (0.8mm) with all-welded construction. Shell and flange shall be 22 gauge (0.8mm) and
have drawn, one-piece, seamless construction. Unit shall be equipped with 18-gauge (1.2mm) hood hinged to shell. *Spindle
shall be chrome-plated plastic with a heavy-duty internal spring. Manufacturer’s service and parts manual shall be provided
to the building owner/manager upon completion of project.
*To specify theft-resistant spindle as an optional accessory, add to specification: Theft-resistant toilet tissue spindle shall be
removable only with special key provided.
Surface-Mounted Toilet Tissue Dispenser With Hood shall be Model __________ (insert model number) of
Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California;
Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd.,
Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/03 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2003 by Bobrick Washroom Equipment, Inc.
ClassicSeries®
SURFACE-MOUnTED
PAPER TOWEL DISPENSER
B-262
Technical Data
7-1/2" 3-15/16"
190mm 100mm
S S Lock & Key
54'' 1370mm
10-7/16"
265mm
MATERIALS:
Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Towel
tray has hemmed opening to dispense paper towels without tearing.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel
piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Optional: Order Bobrick Part No. 262-130 TowelMate® available as an optional accessory. TowelMate accessory allows for
paper towels to dispense one at a time without bulging, sagging or falling through the towel tray opening. TowelMate fits
Gamco and most manufacturers' similar models.
OPERATION:
Unit dispenses C-fold and multifold paper towels 3-1/8" to 3-13/16" (79–97mm) deep. Slots in sides of cabinet indicate refill
time. Capacity: 400 C-fold or 525 multifold paper towels. To dispense narrower towels 2-1/2" to 3-1/8" (64–79mm) deep, order
optional TowelMate accessory Bobrick Part No. 262-130.
INSTALLATION:
Mount unit on wall with four #10 x 1-1/4" (4.8 x 32mm) sheet-metal screws (not furnished) at four of the eight mounting holes
indicated by an S (top slots and bottom holes preferable). For plaster or dry wall construction, provide concealed backing
to comply with local building codes, then secure with sheet-metal screws. For other wall surfaces, provide fiber plugs or
expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall
have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler
lock keyed like other Bobrick washroom accessories. Paper towel tray shall have hemmed opening to dispense paper towels
without tearing. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels measuring 3-1/8" to 3-13/16" (79
to 97mm) deep. Narrower paper towels 2-1/2" to 3-1/8" (65 to 79mm) deep may be efficiently dispensed with the use of an
optional TowelMate accessory, Bobrick Part No. 262-130. TowelMate accessory allows for paper towels to dispense one at a
time without bulging, sagging or falling through the towel tray opening.
Surface-Mounted Paper Towel Dispenser shall be Model B-262 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-262 r06/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
RECESSED
WWW.BOBRICK.COM
PAPER TOWEL DISPENSER
AND WASTE RECEPTACLE
B-3803
Technical Data
&INISH &ACE OF 7ALL
gg
gg
MM gg MM
3 3 MM 3
,OCK +EY
gg
2ECOMMENDED -OUNTING (EIGHT /FF &LOOR
2ECOMMENDED -OUNTING (EIGHT /FF &LOOR
MM
gg TO gg TO MM
0APER 4OWEL
&OR "ARRIER
&REE $ESIGN
$ISPENSER
gg MM
gg
gg
MM MM
$OOR
,OCK
2EMOVABLE
7ASTE 2ECEPTACLE
3 3
gg
gg MM 3 Rough Wall Opening
MM
11-1/2" (290mm) wide
53-5/8" (1360mm) high
5-3/4" (145mm) minimum
recessed depth
MATERIALS:
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet with
a concealed, full-length, stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks
keyed like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Rounded towel tray has hemmed opening to
dispense paper towel without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
Waste Container — Leak-proof rigid molded plastic. Removable for servicing. Capacity: 6.3 gal. (24.0 L).
OPERATION:
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or
towel trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter
prevents damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2'' wide x 53-5/8'' high (290 x 1360mm). Minimum recessed depth required from finish
face of wall is 5-3/4'' (145mm). Allow clearance for construction features that may protrude into rough wall opening from opposite
wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing
and cabinet at all points indicated by an S, then secure with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
SPECIFICATION:
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a
concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two tumbler locks
keyed like other Bobrick washroom accessories. Paper towel dispenser shall be capable of dispensing 600 C-fold, 800 multifold, or
1100 singlefold paper towels. Waste receptacle shall be furnished with a removable, leak-proof, rigid molded plastic waste-container
with a capacity of 6.3 gal. (24.0 L). Manufacturer's service and parts manual shall be provided to the building owner/manager upon
completion of project.
Recessed Paper Towel Dispenser and Waste Receptacle shall be Model _________ (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 2/05 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2005 by Bobrick Washroom Equipment, Inc.