Professional Documents
Culture Documents
NJ5198 - Xenon 300 1 (Original)
NJ5198 - Xenon 300 1 (Original)
MODEL 201331 20
MODEL 201331 20-1
Service Manual
Technical
Description and
Service Instructions
for
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Order No. SV3541
May 2010-0.15 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) SM-20-01-V1.5
© All pictures, photos and product descriptions are the intellectual
property of KARL STORZ GmbH & Co. KG
Utilization and copies by third parties have to be authorized by
KARL STORZ GmbH & Co. KG
All rights reserved.
05.11
XENON 300
MODEL 201331 20
MODEL 201331 20-1
0. General
Thank you for your expression of confidence in the KARL STORZ brand name. Like all of our other
products, this product is the result of years of experience and great care in manufacture. You and your
organization have decided in favor of a modern, high-quality piece of equipment from KARL STORZ.
KARL STORZ instruments and equipment are for use only by qualified medical personnel who are
trained in their use. All electrical installations at the location of use should meet applicable national and
local electrical codes.
Refer servicing to duly authorized KARL STORZ service personnel. Always use genuine replacement
parts from KARL STORZ. To determine which replacement parts are required please refer to the
enclosed replacement parts list. Repair and calibration of this device requires special tools and gauges;
certain internal adjustments must not be altered.
For further information, please consult this service manual or contact:
Warranty
All KARL STORZ instruments and equipment are warranted to be free from defects in workmanship and
materials for two (2) years from date of sale, unless otherwise specified; any instruments or equipment
with such defects during the applicable warranty period will be promptly repaired or replaced at no
charge to the customer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, AND/OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS, AND/OR OF
SUITABILITY FOR A PARTICULAR PURPOSE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON
KARL STORZ’S PART.
KARL STORZ neither assumes nor authorizes any person to assume for it any other liabilities in
connection with the sale of said instrument and equipment. To insure proper use, handling, and care of
instruments and equipment, consult the applicable product literature, catalog, brochure, instruction
manual, teaching film and other materials which are included with the product and/or otherwise available
from KARL STORZ, at no charge, upon request.
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 0-5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
By making the enclosed technical information available, KARL STORZ does not authorize any service or
repair by unauthorized service personnel. Tampering with the instruments or equipment, or unauthorized
service or repair of the device nullifies and voids the warranty.
Reservation of Rights
This documentation is the sole and exclusive property of KARL STORZ and may neither be copied nor
passed on to third parties without the express written authorization and approval of KARL STORZ.
KARL STORZ reserves the right to make engineering modifications in the interest of promoting
technological progress and generating performance improvements without obligation on the part of
KARL STORZ to submit prior notice thereof.
0-6 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 1.
Instruction Manual
Direction Sign:
Physical Design ➩ 2
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 2.
Physical Design
Direction Sign:
1 Instruction Manual
➩
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 2-1
XENON 300
MODEL 201331 20
MODEL 201331 20-1
11
6
3
10
13a
9
4 5
14b
12
13
14a 14
8
2-2 2-2 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Important note:
When ordering replacement parts always provide the following data
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 2-3
XENON 300
MODEL 201331 20
MODEL 201331 20-1
11
6
3
2
1
10
13a
9
4 5
14b
12
13
14a 14
8
2-4 2-4 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
2.2.2 Exploded view of the XENON 300 model 201331 20-1 (as from serial no. LF0612013)
11
6
3
2
1
10
13a
9
4 5
TO
14b
FA
N
12
13
14a 14
8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 2-5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Important note:
When ordering replacement parts always provide the following data
2-6 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 3.
Direction Sign:
1 Instruction Manual
➩
2 Physical Design
➩
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-1
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Note: Manual or automatic mode is selected by pressing the "M" (Mode) button.
Note: The light source will not cease functioning when an alarm sounds, but immediate action
should be taken to ensure that permanent damage does not occur.
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-3
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Hold STANDBY and “-” for more than 8 s Resets lamp hours and power up count.
Hold STANDBY and “+” for more than 8 s Resets error flags and maximum temperature
record.
3-4 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.4.3 Fan
The fan is a 12 VDC fan, with power supplied by the auxiliary DC supply.
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3-6 3-6 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.1.2 Block diagram of the XENON 300 model 201331 20-1 (up to serial no. LF0612012)
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-7
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.1.3 Block diagram of the XENON 300 model 201331 20-1 (as from serial no. LF0612013)
FOCUSING
LENS
LAMP
OUTPUT
FIBER OPTIC
+
XENON LAMP
POWER SUPPLY
OPTICAL
FILTER VARIABLE LIGHT
ATTENUATOR
FAN SPEED
12v
5v
HIGH LOW 0v
PASS PASS
FILTER FILTER
FAN
OPTICAL
POWER FUSES LAMP POWER ACCESSORY INTERRUPTER
INPUT DOOR SWITCH POWER SUPPLY
INTERLOCK
INTERNAL
TEMPERATURE
INVERTER
INPUT MEASUREMENT
MODULE BEEPER
AIR PUMP
12v
5v
0v
TO KARL STORZ COMMUNICATION BUS (SCB) MICROPROCESSOR
CONTROLS
MOMENTARY DISPLAY
SWITCHES ROM LEDS
DIGITAL DISPLAY
BAR GRAPH
STANDBY MODE AIR PUMP
UP - DOWN
3-8 3-8 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-9
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3-10 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-11
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3-12 3-12 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.3.2 Component diagram of the combo board – XENON 300 model 201331 20
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-13
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3-14 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.4.2 Circuit diagram of the control board – XENON 300 model 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-15
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.4.3 Component diagram of the control board – XENON 300 model 201331 20-1
U21
U7 U14 U18 U20
U1 C9 D9
28L
MC34064P-5
+
U3 RESET
R14 JP5
U11
14
15
C8 +
U6
THM1
15
14
U19 BZ1
Y2
Y3 22.1184MHz
C6 R15
16MHz
R22
28L
1
U2 U10
C5 U5
U16 BSS84
Q7
Q9
RP1
Y1 12MHz
C35
C42
R36
R39
+
C37
THM2
U4
C36
R32
R19 T1 BSS138
SCB LF1
R38 R41
M19132 U15 1:1XFORMER R37 R40
JP9
"KARL STORZ" U9
"DISPLAY BD"
R21 R26 U13 C33 R29 R33 C40 HLMP-2965
C47 MBRD340
D14
R31
4
R27
2
JP3
R28
STEPPER
3
C26
1
U17 D12
4
C27
C46
C43
R8
3
IRF9Z10 MC78M05B
1
BAV99
BAV99
TIP120
+
R30
R4 MTD5P06 R20
FOOTSWITCH
U8
ZD1 ZD2
Q2
BS170F
2
4
D7
Q4
R3 R11 C45
C18
JP7 JP8
D3
R6
R17
D6
JP1
R10 R35 Q1
R2 BSS84
D2
1 1 C22 1
+
R5
C12 R24
D5 SCB1 SCB2
JP6
JP4
JP2
R1 R9
D1
3-16 3-16 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-17
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.5.2 Circuit diagram of the display board – XENON 300 model 201331 20-1
3-18 3-18 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
3.5.5.3 Component diagram of the display board – XENON 300 model 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 3-19
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 4.
Direction Sign:
1 Instruction Manual
➩
2 Physical Design
➩
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-1
XENON 300
MODEL 201331 20
MODEL 201331 20-1
– Display board
Torx screwdrivers
6 mm nut driver
Small flat blade screwdriver
Phillips screwdriver
Conductive work mat, wristband, ground cable
– Attenuator assembly
Torx screwdrivers
Small flat blade screwdriver
Phillips screwdriver
Conductive work mat, wristband, ground cable
4-2 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
– Fan
T20 Torx screwdriver order no. 5625112
T25 Torx screwdriver order no. 5625212
Small flat blade screwdriver
Soft face mallet
Needle nose pliers
Phillips screwdriver
Cutters
Conductive work mat, wristband, ground cable
– Air pump
T10 Torx screwdriver order no. 5610612
T20 Torx screwdriver order no. 5625112
T25 Torx screwdriver order no. 5625212
Small flat blade screwdriver
Phillips screwdriver
Soft face mallet
Needle nose pliers
Conductive work mat, wristband, ground cable
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-3
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4-4 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Caution: Do not look into the lamp or lightguide. Do not allow light from either the
lightsource or the lightguide to shine directly on hands or other areas of the
body; burns may occur.
Lamps are high pressure vessels and must be handled with care. When
handling the lamp wear safety glasses and face shields to protect the face
and gloves to prevent skin oil transfer. When working with an operating lamp,
wear eye and face protection to prevent blindness or UV damage.
c. If a complete lamp module assembly has been purchased, install the new assembly at this point.
Skip to step i.
d. Remove the four screws (M4 x 12) securing the lamp assembly to the lamp card.
e. Remove the three screws (6-32" x 1/2" socket head) securing the lamp to the anode heatsink.
f. Loosen the screw clamping the heatsinks to the lamp.
g. Carefully separate each heatsink from the lamp.
h. Apply a thin coating of thermal compound around the inside circumference of the new heatsinks
(both anode and cathode) as well as on the anode end surface.
i. Install the lamp into the lamp heatsinks. Assemble the lamp assembly, then install the assembly into
the device.
j. Test and adjust as described in Section 5.2 and Section 5.3 Testing and adjusting the lamp current.
k. Reassemble in reverse order of disassembly.
Note: Torque the screws (M4 x 12) on the heatsinks to 1.24 Nm (11 in. lb). Do not overtorque!
4-6 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-7
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.2 Figure 1 – XENON 300 model 201331 20-1 (up to serial no. LF0612012)
4-8 4-8 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.3 Figure 1 – XENON 300 model 201331 20-1 (as from serial no. LF0612013)
BURN-IN COVER
LABEL, SPECIFICATION
M18348
QTY. 1
LABEL, SERIAL NUMBER
M18355
QTY. 1
CLIP, CORD
F18522
QTY. 1
BEAD, EMI SHIELDING
Z07589
QTY. 1
2 BRN.
}
TO POWER SWITCH
1 BLUE SEE VIEW "A"
1A BLUE
2A BRN.
RED/RED P2
SCB
RED/BLK P3 1&2
2
MN HAR. (BRN)
L.V. RBN P4 1
(BLUE) ADAPTER, FIBER OPTIC
2 1 20134080
I B EMI SHIELDING 4.6 x 10.2
1A D-SHAPED FOAM
1A
1 1 1
2A
(BLUE) Z07592
O
SCB1 SCB2
QTY. 130MM LG.
SERVO MOTOR +12 5 5 GND GND -12 -FAN+ -PMP+
APPLY TO INSIDE EDGE
JP2 JP4 JP6 JP7 JP8
2A OF FRAME TO CONTACT
RED WIRE BACK SURFACE OF FACEPLATE.
(BRN)
HARNESS
POWER SWITCH
VIEW: "A"
FACE PLATE S/A
SCALE = FULL
NOTE: JP2 NO CONNECTION.
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-9
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4-10 4-10 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-11
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4-12 4-12 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.7 Figure 3 – XENON 300 model 201331 20-1 (up to serial no. LF0612012)
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-13
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.8 Figure 3 – XENON 300 model 201331 20-1 (as from serial no. LF0612013)
CORD, CLIP
(A) F18522
SHROUD, NOMEX LAMP APPLIED TO SHROUD TO SECURE FAN L.V. WIRES
(B) M18479 AND SCB CABLE
QTY. 1
RIVET,
HEAT RESISTANT SNAP
(A) F32034
QTY. 2
FAN WIRES
RIVET, SNAP
(A) F32035
QTY. 2
CABLE TIE
F00506
QTY. 4
BLACK TO
FAN (-)
NEAR FRONT PUMP WIRES
OF UNIT
NUT, M4 KEP
RED TO (A) F15438 FILTER, LINE
FAN (+) QTY. 2 M19137
NEAR REAR QTY. 1
OF UNIT LEFT SIDE
BEAD, EMI B PANEL REF.
SUPPRESSION
Z07590
QTY. 3
HARNESS,
300W MAIN
Z07645 M5 x 8 BUTTON
QTY. 1 HD. SCREW
F00461
BEAD, EMI QTY. 2
SUPPRESSION
Z07587
QTY. 1
FRAME, S/A
M5 x 8 BUTTON
HD. SCREW 17 TO GROUND (CONDOR)
F00461
QTY. 2
J5C NEG. OUT
J1 TO J1 (CONDOR)
WIRES 1,2,3 & 4 (MAIN P.S.)
REF.
300
W
MAIN POWER
SCR, M5 x 10 BUTTON HD. SUPPLY REF.
TORX TAP-TITE
F00458
QTY. 2 J3C POS. OUT
(MAIN POWER SUPPLY)
(J2)
TO
F AN CHASSIS,
S/A INNER 300W
M5 x 8 BUTTON
HD. SCREW
F00461
QTY. 3
4-14 4-14 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.9 Figure 4 – XENON 300 models 201331 20 and 201331 20-1 (up to serial no. LF0612012)
Z09709
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-15
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.10 Figure 4 – XENON 300 model 201331 20-1 (as from serial no. LF0612013)
LEAD TO
LAMP -HV (J5C)
INSULATOR, NOMEX
(B) M19447
QTY. 1
300
W
WASHER, M4
F32011
QTY. 4
4-16 4-16 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-17
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.12 Figure 5 – XENON 300 model 201331 20-1 (up to serial no. LF0612012)
4-18 4-18 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4.11.13 Figure 5 – XENON 300 model 201331 20-1 (as from serial no. LF0612013)
(BOTTOM EDGE)
PANEL, S/A
REAR
QTY. 1
SCREW, M4 x 12
PHILLIPS CHEESE HD.
F32039
QTY. 4
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 4-19
XENON 300
MODEL 201331 20
MODEL 201331 20-1
4-20 4-20 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 5.
Direction Sign:
1 Instruction Manual
➩
2 Physical Design
➩
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 5-1
XENON 300
MODEL 201331 20
MODEL 201331 20-1
5-2 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
Section 6.
Direction Sign:
1 Instruction Manual
➩
2 Physical Design
➩
Appendix ➩ 8
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1)
XENON 300
MODEL 201331 20
MODEL 201331 20-1
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 6-1
XENON 300
MODEL 201331 20
MODEL 201331 20-1
쐽 Visual inspection
– Housing and accessories no external damage
– Inscriptions, manufacturer’s identification correct, legible, clean, wipeable, securely attached
plate data
– CE mark, KARL STORZ inspection label fixed to the housing
– Instruction manual present
– Power fuses7) correct ratings, undamaged, securely positioned,
– Displays
7) For correct power fuse ratings see Section 3.7 Technical data.
8) XENON 300 model 201331 20 only.
9) XENON 300 model 201331 20-1 only.
10) Older versions of the XENON 300 (applied part type BF).
6-2 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
XENON 300
MODEL 201331 20
MODEL 201331 20-1
11) Newer versions of the XENON 300 (applied part type CF).
05.11 / V1.5 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 6-3
XENON 300
MODEL 201331 20
MODEL 201331 20-1
In other countries please contact your local KARL STORZ branch or authorized dealer.
6-4 valid for devices as from serial no. 6256-H (201331 20) and as from 1371-H (201331 20-1) 05.11 / V1.5
KARL STORZ GmbH & Co. KG
Mittelstraße 8, 78532 Tuttlingen/Germany
Postfach 230, 78503 Tuttlingen/Germany
Telefon: +49 (0)7461 708-0
Telefax: +49 (0)7461 708-105
E-Mail: info@karlstorz.de
Web: www.karlstorz.de