The document lists the parts and quantities needed to build the belt-driven system for an Ender 3 3D printer. It includes general components like rods and belts, as well as specific parts for the 80T gear assembly, Z-motor, transmission, left and right plates, and top and bottom brackets in the two available versions. In total it outlines over 30 individual components across various categories required to assemble the belt-driven system.
The document lists the parts and quantities needed to build the belt-driven system for an Ender 3 3D printer. It includes general components like rods and belts, as well as specific parts for the 80T gear assembly, Z-motor, transmission, left and right plates, and top and bottom brackets in the two available versions. In total it outlines over 30 individual components across various categories required to assemble the belt-driven system.
The document lists the parts and quantities needed to build the belt-driven system for an Ender 3 3D printer. It includes general components like rods and belts, as well as specific parts for the 80T gear assembly, Z-motor, transmission, left and right plates, and top and bottom brackets in the two available versions. In total it outlines over 30 individual components across various categories required to assemble the belt-driven system.
General 8mm Rod 330 mm yes/no Gt2 Belt 2 Meter no 80T Gear M3x6mm 5 no 20T 8mm Pulley 1 no 188mm Looped Belt 1 no Z-Motor M3x12mm 4 no 16T 5mm Pulles 1 no Tensioner Arm M3x10mm 2 no M3 nuts 2 no Transmission M5x8mm 5 no M5 T-nuts 5 no Left Plate M5 Nuts 3 yes M5x40mm 3 yes M3 nuts 3 no M3x25mm 1 no M3x12mm 2 no Right Plate M5 Nuts 3 yes M5x40mm 3 no M3 nuts 3 no M3x25mm 1 no M3x12mm 2 no Top Brackets (my version) M5x30mm 4 yes/no M5x8mm 4 no M5 T-nuts 4 no 608ZZ Bearing 4 no 20T 8mm Pulley 2 no Bottom Brackets (my version) M5x8mm 4 no M5 T-nuts 4 no M3x30mm 2 no M3 nuts 2 no F623ZZ 3*10*4 bearing 4 no Top Brackets (Six version(Remix)) M5x8mm 6 no M5 T-nuts 6 no 608ZZ Bearing 4 no 20T 8mm Pulley 2 no Bottom Brackets (Six version(Remix)) M5x10mm 8 no M5x30mm 2 no M5 T-nuts 8 no F695 bearing 4 no