Professional Documents
Culture Documents
User Manual: Digital-Control and Programmable DC Power Supply
User Manual: Digital-Control and Programmable DC Power Supply
Table of Contents
SAFETY INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Digital-Control and Programmable Safety Symbols . . . . . . . . . . . . . . . . . . . . 3
DC Power Supply General Introduction ................. 4
AC Input ......................... 4
KA3000/6000- Series User Manual Fuse Parameters . . . . . . . . . . . . . . . . . . . 4
OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1
KORAD KA3000/6000- Series User Manual KORAD KA3000/6000- Series User Manual
REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SAFETY SYMBOLS
Remote Control Setup. . . . . . . . . . . . . . . 1 4
This chapter contains important safety instructions that
Remote control procedures . . . . . . . . . . . 1 5
you must follow when operating the KA3000 & KA6000
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 series and when keeping it in storage. Read the
following before any operation to insure your safety and
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 to keep the best condition for the KA3000 & KA6000
series.
Safety Symbols
These safety symbols may appear in this manual or on the series.
! WARNING
2 3
KORAD KA3000/6000- Series User Manual KORAD KA3000/6000-Series User Manual
SAFETY INSTRUCTION
S er ies Li neu p/Mai n Features
Safety Guidelines M o d el V M et er A Me te r US B R e so l uti o n
•Do not block or obstruct the cooling fan vent opening. K A3003 D 4d i g i t 4digit NO 1 0mV / 1mA
•Avoid severe impacts or rough handling that leads to
damage. K A3005D 4d i g i t 4digit NO 1 0mV / 1mA
•Do not discharge static electricity . K A6002D 4d i g i t 4digit NO 10m V/ 1mA
•Do not disassemble unless you are qualified as
K A3003 P 4digit 4digit Yes 10mV /1mA
servi ce perso nnel.
K A3005P 4d i g i t 4digit Yes 10mV /1mA
•AC Inut Voltage: 110V / 120V / 220V / 230V , 50 / 60 Hz K A6002P 4d i g i t 4digit Yes 10mV /1mA
AC INPUT
•Connect the protective grounding conductor of the AC
power cord to an earth ground, to avoid electrical
! shock.
4 5
KORAD KA3000/6000-Series User Manual KORAD KA3000/6000- Series User Manual
MEMORY
RECALL/SAVE
M1
6 7
KORAD KA3000/6000-Series User Manual KORAD KA3000/6000- Series User Manual
UNLOCK FNSZ1057-00-00
S/N NO:011062300000000-0000
LOCK Front panel lock_out function. For details, see Page 11.
BEEP
POWER
On / Off main power. For power up sequence, The power cord socket mainly accepts AC
see Page 10. values: 115V / 230V, 50 / 60 Hz. Please
refer to the fuse parameters on the back
+ - fuse label to replace the specified fuse.
outputs voltage and current.
8 9
KORAD KA3000/6000-Series User Manual KORAD KA3000/6000- Series User Manual
Pr ess the powe r swi tch to turn powe r on. Beep On / Off
power on POWER
The display initializes, showi ng the mo del
of the ma chine and then showi ng the setting
last. Panel Operation By default, the beep sound is enabled. To turn off
the beep, press the OCP(BEEP) button for 2 seconds.
A beep comes out and the beep setting will be turned
POWER off. To enable the beep, press the OCP(BEEP) button
power off again for 2 seconds.
Press the power switch again to turn power off.
10 11
KORAD KA3000/6000-Series User Manual KORAD KA3000/6000-Series User Manual
Save Setup
Background The front panel settings can be stored into one of M1 I n d i ca tio n o f sa vi n g and r e ca l li n g 4 se t u p s st o r e d
the four internal memories. M2
i n t e rnal l y;
M3 Press one of the 1 ~ 4 Memory buttons, for example
Contents The following list shows the setup contents.。 M4 number 1. The panel settings saved in memory
●Fine / coarse knob editing mode No. 1 are recalled. The LED M1 turns on.
●Beep on / off
●Output voltage / current level
The following settings are always saved as "off ".
● Output on / off
● Front panel lock on / off
Note: When a set ting is recal led, the out put aut om at ical ly
tur ns off .
Panel operation Press one of the 1 ~ 4 Memory buttons for 2 seconds,
for example number 1. The panel settings are saved
in memory No. 1 and the button LED turns on. When
the panel settings are modified, the LED turns off. 。
12 13
KORAD KA3000/6000-Series User Manual KORAD KA3000/6000-Series User Manual
14 15
KORAD KA3000/6000- Series User Manual KORAD KA3000/6000-Series User Manual
Specifications
Note: The specifications below are tested under the conditions of
FAQ temperation 25℃+-5℃ and the warm-up for 20 minutes.
16 17
KORAD KA3000/6000- Series User Manual KORAD KA3000/6000- Series User Manual
Reaction Time
≤100 m S ≤100 m S ≤100 m S
Voltage Rise
≤100 m S ≤100 m S ≤100 m S
Voltage Drop
(10% Rated load) (10% Rated load) (10% Rated load)
Interface
Optional Interfaces (for programmable models only): RS232, USB
Accessories
User manual 1 PC ; Power cord1 PC,Test lead 1pc,
software CD 1PC(only programmable units).
Weight and Dimension
18 19