Professional Documents
Culture Documents
Price For Charcoal Kilns 2021 1
Price For Charcoal Kilns 2021 1
Price For Charcoal Kilns 2021 1
In this price we’d like to represent 3 main types of our charcoal kilns
The charcoal kiln UMT-5v1 differs from the UMT 5 in the volume of drying chambers and in an
increased extraction of pyrolysis gas to the drying chambers, which allows drying 15 m3 of wood in each
chamber. This installation is suitable for wood with a moisture content of more than 50% and soft
species, as well as for industries that harvest dry firewood for the fireplace.
The productivity of UMT-5v1 is more than 85 tons of charcoal per month
Parameters
UMT-5v1 module dimensions
Width -depth –height 6000х2700x30000 mm (without chimneys)
The diameter of the retort is 2130 mm
Weight – 15 000 kg
Drying chambers’ dimensions
9400х2250х3280 mm
Weight – 3 800 kg
The main difference between "UMT EcoTeploOtbor" from other UMT models is the presence of a boiler
for burning pyrolysis gas, with a capacity of 400-600 kW.
Charcoal furnace "UMT EcoTeploOtbor" allows to select the excess heat obtained in the production of
charcoal, for production needs where a large amount of thermal energy is required.
The maximum power is 600-800 kW /h with active pyrolysis, the rated power is 300-400 kW /h
All control processes are fully automated, including fuel supply, which minimizes the influence of the
human factor on the operation of equipment
Also it’s possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes
The productivity of the briquette is 100-120 tons / month
p
r
o
d
u
c
t
i
v
i
ty 38-50 tons per moth for charcoal and 100-120 tons per month per briquettes
3. The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to
charcoal is 5.1m3 per 1 ton of charcoal
4. Low operating costs. The equipment serves one person whether it is a single installation, two or three.
6. Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5
minutes
8. Work without repairs. We give a guarantee for two years. Minimum terms for work without repair - 5
years
9. Environmental cleanliness. No emissions into the atmosphere either before or after or during the
production process
10. Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste
incineration.
11. Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per
year, the price of charcoal kiln is the lowest in the world market.
the ratio of wood to charcoal is 4.7 / 1. This means that 4.7 m3 of hard wood = 1 ton of high quality charcoal.
This indicator does not give any one of the famous charcoal kilns.
no emissions to the atmosphere. High environmental safety allows to arrange this charcoal kiln anywhere.
includes:
band conveyer
charging hopper
packing unit with two nozzles and table adjustable in height
electronic scales - 2 pieces
aspiration system with
rumble with exchangeable grids to divide coal into fractions
feed rate control
Terms of manufacturing – 21 workdays
Price on terms FCA Kostopol, Ukraine – 7 150 $
Packaging line with raw material supply by belt and screw conveyors
productivity 1500 kg/hour
What is the difference between setting a feed screw conveyor and the belt conveyor ?
Belt and screw conveyor
When fed by a screw conveyor to a conveyor belt, there is no need to grind the charcoal to the required fraction -
this is done by the screw.
Belt conveyer
ADDITIONAL OPTIONS :
Set of 6 baskets for "UMT-3" for firing finely fraction of raw materials – 1 099 $
Automatic protection against critical temperatures on the UMT "Farmer Standard Plus" -2 200 $
Drying wood on exhaust smoke for all UMT models (increases productivity up to 30%) are calculated on request,
based on the customer's specific needs.
Recommendations for the organization of the production of charcoal on the basis of our equipment - $ 350
including:
- recommendations on the organization of production on the territory of the Customer
- plan-scheme of equipment placement on the territory of the Customer
advising on the organization of production processes
The cost of the equipment does NOT include:
• Travel to the place of installation and back, accommodation, meals of the Contractor's employees at the
Customer's site
Prices valid from January, 05, 2021, this price is not a public offer and may be changed by the manufacturer
Looking forward to hear from You
Kindly regards,
Vladislav Chernov, General Director