Professional Documents
Culture Documents
12-Msds-Deformer-28 (Wetting Agent) (Liquid)
12-Msds-Deformer-28 (Wetting Agent) (Liquid)
1.4 Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses Suitable for textile, printing and dyeing, paper making, wastewater treatment and other industries to
eliminate or suppress foam.
Incident response
1/9
Safety Data Sheet(SDS)
TRANSFOM DEFORMER-28 (WETTING AGENT) (LIQUID)
SDS No.: SDS/ S05302/DEFORMER-
According to GB/T16483-2008、GB/T17519-2013 28 (WETTING AGENT) (LIQUID)
Version:4.0 -Revision date: 2017.2.1
P312 Call a POISON CENTER/doctor/physician/first aider/if you feel unwell.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
P305+P351+P338
easy to do. Continue rinsing.
P332+P313 If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
Safe storage
Not Applicable
Waste disposal
2/9
Safety Data Sheet(SDS)
TRANSFOM DEFORMER-28 (WETTING AGENT) (LIQUID)
SDS No.: SDS/ S05302/DEFORMER-28
According to GB/T16483-2008、GB/T17519-2013 (WETTING AGENT) (LIQUID)
Version:4.0 -Revision date: 2017.2.1
Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
If skin or hair contact occurs:
Skin Contact Flush skin and hair with running water (and soap if available).
4.2 Advise for rescue team (PPE requirement for rescue personnel)
Wear portable respiratory protective devices if get into the scene of the accident.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
High temperature decomposition products include silicon dioxide, small amounts of formaldehyde,
formic acid, acetic acid and traces of silicon polymers.
On combustion, may emit toxic fumes of carbon monoxide (CO).
Fire/Explosion Hazard
May emit acrid smoke.
Mists containing combustible materials may be explosive.
Combustion products include:
Carbon dioxide (CO2),
Other pyrolysis products typical of burning organic material
May emit corrosive fumes.
Check all containers are clearly labelled and free from leaks.
Storage incompatibility Avoid reaction with oxidising agents
Engineering controls are used to remove a hazard or place a barrier between the worker and the
hazard. Well-designed engineering controls can be highly effective in protecting workers and will
typically be independent of worker interactions to provide this high level of protection. General
exhaust is adequate under normal operating conditions. Local exhaust ventilation may be required in
Appropriate engineering specific circumstances. If risk of overexposure exists, wear approved respirator. Correct fit is
controls essential to obtain adequate protection. Provide adequate ventilation in warehouse or closed storage
areas. Air contaminants generated in the workplace possess varying "escape" velocities which, in
turn, determine the "capture velocities" of fresh circulating air required to effectively remove the
contaminant. Process controls which involve changing the way a job activity or process is done to
Personal protection
6/9
Safety Data Sheet(SDS)
TRANSFOM DEFORMER-28 (WETTING AGENT) (LIQUID)
SDS No.: SDS/ S05302/DEFORMER-28
According to GB/T16483-2008、GB/T17519-2013 (WETTING AGENT) (LIQUID)
Version:4.0 -Revision date: 2017.2.1
Flammability Not Applicable
Upper Explosive Limit (%) No data available
Lower Explosive Limit (%) No data available
Explosive properties Not explosive
Vapour pressure (kPa) No data available
Vapour density (Air = 1) No data available
Relative density (Water = 1) 0.87-0.97
Solubility in water (g/L) Dispersed in water
Partition coefficient
No data available
n-octanol / water
Auto-ignition temperature(°C) No data available
Decomposition temperature(°C) No data available
Critical temperature(°C) No data available
Critical pressure(kPa) No data available
Combustion heat No data available
Evaporation rate No data available
Viscosity(mPa·s) 100-300
VOC(g/L) No data available
7/9
Safety Data Sheet(SDS)
TRANSFOM DEFORMER-28 (WETTING AGENT) (LIQUID)
SDS No.: SDS/ S05302/DEFORMER-28
According to GB/T16483-2008、GB/T17519-2013 (WETTING AGENT) (LIQUID)
Version:4.0 -Revision date: 2017.2.1
Germ cell mutagenicity No data available
Reproductive toxicity No data available
STOT – single exposure No data available
STOT - repeated exposure No data available
Aspiration toxicity No data available
Carcinogenicity assessment
No data available
carcinogenicity
Safety, health and environmental regulations / legislation specific for the substance or mixture
9/9