Professional Documents
Culture Documents
Insufine VI 615
Insufine VI 615
Insufine VI 615
INSUFINE® - VI 615
(BAKING INSULATING VARNISH – CLASS ‘F’)
PRODUCT
APPLICATION
INSUFINE® - VI 615 is ideally suited for impregnation of all wire wound motors of thermal
rating ‘F’.
Dip application: The windings are heated to 105oC and then cooled to 40oC or 5oC above
ambient. The preheated windings are kept in the impregnation chamber and evacuated. After
a vacuum level of 10-15mm is reached, the vacuum valve is shut and the varnish is allowed
to rise from the bottom valve. Allow the winding to remain completely soaked for at least
one hour. The varnish is now drained back to the storage tank.
Spray or Brush application: The winding is heated to 105oC and then cooled to 40oC and
INSUFINE®-VI 615 is applied.
APPLICABLE STANDARDS
TECHNICAL SPECIFICATIONS
Volume resistivity
at 30oC : 1 - 1.5 x 1016 W cm
after immersion in water
at 30oC for 240 hours : 1 - 1.2 x 1016 W cm
SAFETY INFORMATION
If this document is stamped as “Controlled Copy”, you will automatically receive all future revisions of this.