Professional Documents
Culture Documents
ZXJ10 Technical Guide Remote Maintenance Console
ZXJ10 Technical Guide Remote Maintenance Console
ZXJ10 Technical Guide Remote Maintenance Console
ZTE CORPOARATION
Nov, 2007
Modification
Draft/
Version Draft by/ Main modifications (fill in
Document No. Modification Proofread by
No. Modify by only the key points)
Date
Gao Chuanjin 2007-11-15 Zhu Handong
Note 1: The table shall be filled every archive (files archived to the division or company archives room).
Note 2: For the first archive, fill “None” in the fields "Modification reasons” and “Main modifications”.
Conventions
1. Notational convention
Bolt indicates menus, menu options, function names, input fields, radio button names, check boxes,
drop-down lists, dialog box names, window names.
The symbol ““separates a multi-level menu, e.g.,
File New Folderindicates theFolder menu item
under the New submenu of the menu File.
this manual to emphasize important and critical information. You must read these statements to help
ensure safety and to prevent product damage. The statements are defined below.
Danger:
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
This signal word is to be limited to the most extreme situations.
Warning:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution:
It indicates a potentially hazardous situation which, if not avoided, could result in minor or m
injury. It may also be used to alert against unsafe practices.
Note:
A Note statement is used to notify people of installation, operation, or maintenance information that are
important, but not hazard-related.
Tips:
Indicates a suggestion or hint to make things easier or more productive for the reader
Contents
CHAPTER 1 REMOTE MODULE MAINTENANCE CONSOLE INSTALLATION...............................6
Abstract:
This text introduces the installation of remote module maintenance console.
The remote module maintenance console can maintain individual remote modules, suppo
machine command and local 112 test. This function is complete in the EU4 version
communication mode is changed in EU5 and EU6, as a result, it is impossible t
measurement console in client terminal nodes (such as 134 and 135) and it can only be installed in the
server node (such as 129-133, and it should be different from the existing server nodes). For installation
Installation of
Remote Module 112.doc
in EU4 environment, refer to .
This text will discuss how to install remote module maintenance console in
environment.
To SNM
MP network cable
112 tester
console
HUB
1.2 Installation
Brief steps:
1. Install SQLServer2000 and its patch in 133 server, and install BDE, ODBC and communication
system.
本文中的所有信息归中兴通讯股份有限公司所有,未经允许,不得外传
Internal Use Only▲
1.2.1 Communication System Installation
For i nstallation
o S f B QLServer2000,
a O i r t DE
s v nd i DBC nstallat
manual.
Select node No.: Communication mode is changed in EU5 and EU6 versions, select server
during installation. Here 133 will be taken as an example.
guide.
To take a 112 test, pay attention to configuration in C:\WINNT\win_mgt. Follow the following
configuration.
[General]
TerminalType=0
PCNode=13
PostOffice=87
AreaCode=29
IsServer=1
[Post1]
PostOffice=87
ServerNameCount=4
AreaCode=29
ServerNode1=133
ServerName2=Charging Server
ServerNode2=129
ServerName3=Traffic Server
ServerNode3=129
ServerName4=OMM
ServerNode4=3
[RasDial]
IsGateway=1
[StringDisplay]
Area29Post85_DispStr=Default
[LocalPostString]
AreaString=29
PostString=87
Man-machine command and alarm inquiry fail to be executed in EU5 and EU6 environment. To solve
this problem, install EU4 client terminal.
303Eu.5(050128)T2
4_RemoteModule_OMCD071011.rar
For versions after EU5(050128)T9, select the patch file
303Eu.6R1T5_Remot
eModule_OMCD071011.rar
EU6 selects the patch file