Professional Documents
Culture Documents
Jack Tooling 98D07103001
Jack Tooling 98D07103001
RECOMMENDED MODIFICATION
NOTE: N/A
HISTORY:
TEB Issue No Change Description Drawing Issue Category
1 New A00 Introduction
2 REF jacks LANGA added B00 Recommended
3 REF jacks TMH TOOLS added C00 Recommended
4 Orientation Jacking added F00 Recommended
5 Ref. Jack added G00 Recommended
Page: 1
Date: 06/16/2015
MODIFICATIONS
FR 73 / FR74
Issue
DATE : 07/04/2015
A NAME : SEMSD
DATE: 02/10/2017
Issue
NAME: SEMSD
G TYPE: MINOR
- SHEET 07 ADDED
- SHEET 01, 03, 04 & 05
UPDATED
RIB 9 (LH)
- QUANTITY UPDATED FOR
RIB 9 (RH)
ITEM 042
- CE TEMPLATE UPDATED
WING JACK
SAFETY JACK
NOSE JACK
WING JACK RH
WING JACK RH WING JACK LH
FR 73 / FR74
NOSE JACK
RIB 9 (RH)
FR 8
NOSE JACK
SAFETY JACK
AMETEK
RIB 9 (LH) CAGE CODE: 4A887 01 98D07103001000 GLOBAL JACKING SA
QTY SHEET ITEM NR. PART NR. DESCRIPTION DIMENSION MATERIAL PROTECT TRAITEMENT MISCELLANEOUS WEIGHTS
INCHES
0 1 2 3 4
WING JACK LH
MILLIMETRES
98D07103001000
COMPUTER PRODUCED DRAWING USING CATIA V5. NO MANUAL ALTERATION
PART NUMBER
This document and all information contained herein is the sole property of AIRBUS SAS.
No intellectual property rights are granted by the delivery of this document or the
disclosure of its content. This document shall not be reproduced or disclosed to a third
party without the express written consent of AIRBUS SAS. This document and its
content shall not be used for any purpose other than that for which it is supplied.
The statements made herein do not constitute an offer. They are based on the mentioned
assumptions and are expressed in good faith. Where the supporting grounds for these
statements are not shown, AIRBUS SAS will be pleased to explain the basis thereof.
C AIRBUS SAS (2010) All rights reserved. Confidential and proprietary document.
IDENTIFICATION MARKINGS INTERCHANGEABLE PART YES NO SCALE VALID FOR MASTER DRAWING ONLY
NOTE:
DRN SEMSD CHK
D
SEMSD STRESS DWG.SYST SEMSD
D.O.ORIG FAPE3 APP
D
WTS PROCESS SEM
FIRST ANGLE
TITLE : AIRBUS PROJECTION SIZE A0
NON CONTRACTUAL ORIENTATION JACKING, SEE SHEET 02 GLOBAL JACKING SA 98D07103001 SHEET 01/07
G
ISSUE
MODIFICATIONS
Issue
DATE : 25/02/2016
A NAME : SEMSD
JACKING ORIENTATION
WING JACK RH
FR 73 / FR 74
RIB 09 (RH)
FR 73 / FR 74
FR8
NOSE JACK
SAFETY JACK
WING JACK LH
FR8
RIB 09 (LH)
0 1 2 3 4
NOSE JACKING
DATE: 07/04/2015
A NAME: SEMSD
Issue
DATE: 16/06/2015
B NAME: SEMSD
Issue
DATE: 29/07/2015
C NAME: SEMSD
- ALTERNATE REF JACKS
TMH-TOOLS ADDED
DATE: 02/10/2017
Issue
NAME: SEMSD
G TYPE: MINOR
- NOTE ABOUT STANDARD
JACK TO REFER UPDATED
01
02
NOSE JACK
03
1 04 98A070039XXXXX ADAPTER LOAD CELL SEE TABLE
PART NR. ØA
98D07103001040 NOSE JACK
98A07003907200 25.2 0/-0.1
QTY ITEM NR. PART NR. DESCRIPTION DIMENSION MISCELLANEOUS
-0.2/-0.5
98A07003907204 45
0/-0.1
04 INCHES
98A07003907206 24.5 0 1 2 3 4
98A07003910200 33 0/-0.1
COMPUTER PRODUCED DRAWING USING CATIA V5. NO MANUAL ALTERATION
SEE CAUTION This document and all information contained herein is the sole property of AIRBUS SAS.
No intellectual property rights are granted by the delivery of this document or the
disclosure of its content. This document shall not be reproduced or disclosed to a third
party without the express written consent of AIRBUS SAS. This document and its
content shall not be used for any purpose other than that for which it is supplied.
The statements made herein do not constitute an offer. They are based on the mentioned
assumptions and are expressed in good faith. Where the supporting grounds for these
statements are not shown, AIRBUS SAS will be pleased to explain the basis thereof.
C AIRBUS SAS (2010) All rights reserved. Confidential and proprietary document.
STANDARD JACK
LIMITS NOT STATED SURFACE FINISH 3.2
OR JACK APPROVED BY AIRBUS ISO 2768 - (mK) ISO 1302
AIRBUS SAS
1/1
DRAWING N°
WING JACKING
Issue
DATE: 16/06/2015
B NAME: SEMSD
Issue
DATE: 29/07/2015
C NAME: SEMSD
- ALTERNATE REF JACKS
TMH-TOOLS ADDED
Issue
DATE: 18/08/2015
D NAME: SEMSD
- JACK PAD SET P/N
"98D07104081000" ADDED
FOR A321
Issue
DATE: 30/09/2015
E NAME: SEMSD
- TYPING ERROR ITEM: 03
"98D07003911200" BECOMES
"98A07003911200"
DATE: 02/10/2017
Issue
NAME: SEMSD
G TYPE: MINOR
- NOTE ABOUT STANDARD
JACK TO REFER UPDATED
- QUANTITY UPDATED FOR
ITEM 03, 04 & 05
01 A318/A319/A320
OR
02 A321
WING JACK
03
2 05 98A070039XXXXX ADAPTER LOAD CELL SEE TABLE
PART NR. ØA QTY ITEM NR. PART NR. DESCRIPTION DIMENSION MISCELLANEOUS
98A07003909200 58 0/-0.1 COMPUTER PRODUCED DRAWING USING CATIA V5. NO MANUAL ALTERATION
98A07003910200 33 0/-0.1 ØA This document and all information contained herein is the sole property of AIRBUS SAS.
No intellectual property rights are granted by the delivery of this document or the
disclosure of its content. This document shall not be reproduced or disclosed to a third
party without the express written consent of AIRBUS SAS. This document and its
SEE CAUTION content shall not be used for any purpose other than that for which it is supplied.
The statements made herein do not constitute an offer. They are based on the mentioned
assumptions and are expressed in good faith. Where the supporting grounds for these
statements are not shown, AIRBUS SAS will be pleased to explain the basis thereof.
C AIRBUS SAS (2010) All rights reserved. Confidential and proprietary document.
(SEE SHEET 07) DRN SEMSD CHK D SEMSD STRESS DWG.SYST SEMSD
CAUTION: D.O.ORIG FAPE3 APP D WTS
FIRST ANGLE
PROCESS SEM
- CHOOSE ADAPTER IN ACCORDANCE WITH INTERNAL JACK DIAMETER. TITLE : AIRBUS PROJECTION SIZE A1
- ADJUSTMENT BETWEEN "ITEM 05" AND THE JACK SHOULD RESPECT "H7/f6" TOLERANCE OR A MAXIMUM CLEARANCE OF 0.1 mm.
- IF CORRESPONDING DIAMETER IS NOT AVAILABLE IN THIS TABLE, REFER TO SHEET 05. GLOBAL JACKING SA 98D07103001 SHEET 04
G
ISSUE
MODIFICATIONS
Issue
DATE: 07/04/2015
SAFETY JACK A
Issue
B
NAME:
DATE:
NAME:
SEMSD
16/06/2015
SEMSD
Issue
DATE: 29/07/2015
C NAME: SEMSD
- ALTERNATE REF JACKS
TMH-TOOLS ADDED
DATE: 02/10/2017
Issue
NAME: SEMSD
G TYPE: MINOR
- NOTE ABOUT STANDARD
JACK TO REFER UPDATED
AIRCRAFT PART
01
WARNING UNIT
SAFETY JACK
ØA
SEE CAUTION 1 01 98D07103000001 DYNAMOMETER SAFETY JACK
INCHES
0 1 2 3 4
A
DATE :
NAME :
07/04/2015
SEMSD
2 x30°
-0,1
40 -0,2
2 CH. 1 45
23
15
2 x30°
ØFx1.5 mini
118
- ØF HAS TE BE DEFINED IN ACCORDANCE WITH INTERNAL JACK DIAMETER AND RESPECT "H7/f6"
TOLERANCE OR A MAXIMUM CLEARANCE OF 0.1 mm
ADAPTER LOAD CELL Ø120 35NiCr6 BLACK OXIDE
INCHES
0 1 2 3 4
GROUND
REFERENCE TEB_320A3432_90026395
Distribution List
ISSUE 5 DATE 02 Oct 2017
TEB_320A3432_5
Distribution List
© AIRBUS S.A.S. 2017. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
REFERENCE TEB_320A3432_90026395
Validation Report
ISSUE 5 DATE 02 Oct 2017
TEB_320A3432_5
Validation Report
AUTHORS AGREEMENT
Name [Siglum] Date
BATTIN Martine [for SEMS] 09 Oct 2017 Electronically validated
(SONOVISION)
AUTHORIZATION
Name [Siglum] Date
LAROYE PIERRE [SEMSB] 10 Oct 2017 Electronically validated
© AIRBUS S.A.S. 2017. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.