Professional Documents
Culture Documents
Wasp Maxbuilt Traditional Side Panel-0002 Description Qty
Wasp Maxbuilt Traditional Side Panel-0002 Description Qty
Wasp Maxbuilt Traditional Side Panel-0002 Description Qty
DESCRIPTION QTY
---CHASSIS SPECIFICATIONS--- 1
Ford F550 Super 4x4 (Crew Cab) Auto Trans (84"CA) 1
Darley - Max-Bilt Edition Ford F550 With 2" Lift 1
--The handrail shall be on the inside top left end of the body
(hosebed) at the rear. None on the right due to ladder storage.
|-- Rear Crossrail - Horizontal (1) 1
|-- 300 Gallon Tank - CoPoly 1
|-- Foam Tank - 25 Gallon Integral Poly (1) 1
|-- Water Tank - Direct Auto Fill System At Left Rear 1
|-- Direct Fill Control At Pump Operator Position 1
|-- Vision Body - Subframe - Galvanized 1
|-- Vision Body - Fenders - Black Rubber - Single Axle 1
|-- Integral Body Compartments (Pike Pole And Ladder Storage 1
|-- Tailboard - Vision Body - Initial Attack (Recessed) 1
|-- CoPolymer Side Compartments With SCBA Storage Right 1
|-- Rear Compartment (Roll Up Door) 1
|-- Brushed Finish Roll Up Door (Rear) 1
|-- Side Compartment Doors (Roll Up & Painted Aluminum) (Lo 1
|-- ROM Series IV Roll Up Door Construction (Vision IA) 1
|-- Brushed Finish Roll Up Doors (Side) 1
Ladder And Back Board Storage - Top Body Compt - Horizontal (R 1
|-- Ladder Capacity - 20 ft 3 Section 1
Suction Troughs - Left Body Side - Two Plus Third Hose Position 1
Unistrut Shelving Tracks (Each Compt) 6
---One (1) set in the left side body compartment #2 over the
rear wheel well.
--Adjustable Shelving For Vision (Aluminum) 7
Shelving shall be located as follows: