Professional Documents
Culture Documents
Sky Air r32 Catalog
Sky Air r32 Catalog
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product by yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the user's manual carefully before using this product. The user's manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer. AIR CONDITIONING SYSTEM
COOLING ONLY [60Hz]
Specifications, designs and other content appearing in this brochure are current as of April 2018 but subject to change without notice.
64kg
100
power consumption
room to deliver comfort that never
Cooling seasonal
feels cold.
3. Reaches every 1,345
mm
990
corner of the room 50 mm
320mm
Previous non-inverter series New inverter RZF-C series 900mm 320mm 940mm
(average) (average)
(cassette type) (cassette type) R48NUY1 (In case of 14.0kW class) RZF140CYM
right from the basic design to use CO 2 R-32 R-22 R-410A R-11 R-12 R-23
R-32.
(HFC) (HCFC) (HFC) (CFC) (CFC) (HFC)
Standard panel Designer panel *1. Source: Values for 100-year global warming potential (GWP) from IPCC Fourth Assessment Report. Comparative 100-year GWP: HFC410A, 2,090; HFC32, 675.
- Fresh White - - Fresh White -
1 2
NEW Circulation Airflow Evenly Distributes Cool Air *1 *1. Applicable when wired remote controller BRC1E63 is used.
New Round Flow
Cassette movie at
Daikin official
YouTube site.
Airflow until now had areas that were either too cool or not cool enough. Comfort to the Entire Room with Even Temperatures and No Cold Air Pockets at Floor Level
30.0
4-way cassette (Swing) 29.0
Comparison Conditions
28.0 Room size:
Problem 1 27.0 Width 7.5m x depth 7.5m
26.0 x height 2.6m
Hot outdoor air entering through 25.0 Indoor unit capacity: 71 class
windows and walls causes these 24.0 Outdoor air temperature: 35°C
areas to become hot. 4-Way Flow 23.0
22.0 Airflow rate and air direction:
high / swing
21.0
20.0
Problem Problem 2
Hot Areas at floor level are
Cool air accumulating directly outdoor cold while areas
underneath causes cold air air around walls are hot.
pockets at floor level.
4 2
temperature. (26°C)
Quick descent of cool air causes
insufficient cooling for corners of Full comfort is
the room. provided with no
cold feet.
(at start) Airflow Effectiveness may differ according to room conditions, room size,
Round flow Indoor unit
capacity FCF50-71 FCF100-140
Wall surface
switches from 3-way horizontal flow to 4-way downward flow [swing] to Distance Minimum distance between
normal operation 2-way horizontal flow to 4-way downward flow [swing].) to wall indoor units [Table 2] [Table 2]
Minimum distance between indoor units
[Table 1]
(all-round flow) begins. Circulation airflow functions during connection with wired remote controller. 1.8m or more above floor surface Indoor unit
(BRC1E63). However, use is not possible for the following conditions: capacity FCF50-71 FCF100-140
- When a sealing material of air discharge outlet and branch ducts are used; Floor surface
Note: Minimum
- When individual airflow setting is selected; distance 5m or more 7m or more
Cools areas around Cools entire room Cools areas around Cools entire room Results may vary depending on
walls using using 4-way walls using using 4-way equipment conditions, room size, - When using group control other than round flow.
2-way horizontal flow swing flow 2-way horizontal flow swing flow and distance from indoor unit to walls.
3 4
NEW Individual Airflow Direction Control *1 *1. Applicable when wired remote controller BRC1E63 is used.
NEW Daikin Sensing Technology *1,2
*1. Applicable when wired remote controller BRC1E63 is used.
New Round Flow
Cassette movie at
Daikin official
YouTube site.
*2. Applicable when sensing panel (BYCQ125EEF/EEK) is installed.
Comfortable air conditioning for all room layouts and conditions Dual Sensors*2
Dual sensors and individual airflow direction control automatically provide
Airflow direction can be individually
adjusted for each air discharge outlet to
Easy setting is possible with a wired remote controller. optimal control of airflow.
deliver optimal air distribution.
NEW
BRC1E63
Infrared presence sensor
Position 0 There are
identification The sensor detects the presence of people in each of the
(Fixed airflow to marks near
the air outlets.
4 areas.
highest position)
Remote controller Ceiling height 2.7m 3.5m 4.0m
screen
Detection range approx. approx. approx.
(diameter)*3 8.5m 11.5m 13.5m
*3. The infrared presence sensor detects 80cm above the floor.
Detecting the
presence of people
No individual Individual airflow settings in each of the 4 areas Infrared floor sensor
setting ・No individual setting (Auto airflow)
(Auto airflow) ・Position 0 (Highest point) The sensor detects the floor temperature and
・Position 1 C automatically adjusts operation of the indoor unit to
・Position 2 B D reduce the temperature difference between the ceiling
・Position 3 and the floor.
Swing Position 4 ・Position 4 (Lowest point) A
(Up/down) (Fixed airflow to the ・Swing Ceiling height 2.7m 3.5m 4.0m
lowest position) Detecting the
Individual settings are possible as stated above. average temperature Detection range approx. approx. approx.
of the floor (diameter)*4 11m 14m 16m
When individual airflow is selected, airflow direction can be adjusted to room layout. *4. The infrared floor sensor detects at the floor surface.
Swing
Swing is
selected for
Auto Airflow Function*5 *5.Airflow direction should be set to “Auto”.
areas near
the windows. No individual (Auto)
Direct Airflow (default: OFF) Cooling Dry
Auto is set for people
Position 0
For offices The airflow is at the
highest setting (Position 0)
for people who
Swing dislike air blowing
Discussions near Swing is set for directly on them.
a hot window meetings near
quickly heat up.
the windows.
Optimal air direction by “Auto”
5 6
Daikin provides your on-demand inv erters with a variety of indoor units
INDEX
New Round Flow Cassette
Circulation Airflow P.3-4
Individual Airflow Direction Control P.5
Sensing Technology P.6
Lineup P.9-10
Functions P.43-46
Specifications P.47-50
Options P.51-53
Dimensions P.55-66
Duct connection Duct connection Floor standing type
middle static pressure type middle static pressure type Installation Service Space for Outdoor Unit P.67
7 8
Product Lineup
Cooling only
DUCT CONNECTION
MIDDLE STATIC
PRESSURE TYPE
Page
29
Indoor unit FBA50BVMA FBA60BVMA FBA71BVMA FBA100BVMA FBA125BVMA FBA140BVMA
Outdoor unit RZF50CVM RZF60CVM RZF71CVM RZF71CYM RZF100CVM RZF100CYM RZF125CVM RZF125CYM RZF140CVM RZF140CYM
Page
31
Indoor unit FHA50BVMA FHA60BVMA FHA71BVMA FHA100BVMA FHA125BVMA FHA140BVMA
Outdoor unit RZF50CVM RZF60CVM RZF71CVM RZF71CYM RZF100CVM RZF100CYM RZF125CVM RZF125CYM RZF140CVM RZF140CYM
Page
33
Indoor unit FAA71BVMA FAA100BVMA
Outdoor unit RZF71CVM RZF71CYM RZF100CVM RZF100CYM
Page
35
Indoor unit FVA50AMVM FVA60AMVM FVA71AMVM FVA100AMVM FVA125AMVM FVA140AMVM
Outdoor unit RZF50CVM RZF60CVM RZF71CVM RZF71CYM RZF100CVM RZF100CYM RZF125CVM RZF125CYM RZF140CVM RZF140CYM
OUTDOOR UNIT
Page
37
Outdoor unit RZF50CVM RZF60CVM RZF71CVM RZF71CYM RZF100CVM RZF100CYM RZF125CVM RZF125CYM RZF140CVM RZF140CYM
Power supply
1 phase, 3 phase, 1 phase, 3 phase, 1 phase, 3 phase, 1 phase, 3 phase,
220-230V, 60Hz 380V, 60Hz 220-230V, 60Hz 380V, 60Hz 220-230V, 60Hz 380V, 60Hz 220-230V, 60Hz 380V, 60Hz
9 10
New Inverters launched Compact & Lightweight
New outdoor units save even more space
Energy Saving
1,345
23% reduction
in volume
Throughout the cooling season, 0.39m3 0.30m3
mm
990
Daikin’s new inverter models reduce energy consumption mm
40% reduction
Compared with previous non-inverter series, the new RZF-C series uses about 50% less power consumption
for quick and effective cooling that reduces electricity bills.
in weight
Comparison of cooling seasonal power consumption
320mm
109kg 64kg
based on average CSPF values 900mm 320mm 940mm
100
50%
reduction!
R140LUYAL (In case of 14.0kW class) RZF140CYM
power consumption
Cooling seasonal
Note: Value 100 represents the amount of electricity used by a R71LUVAL R100LUVAL R125LUYAL R140LUYAL
non-inverter model during a similar annual cooling period.
75kg 92kg 98kg 109kg
Previous non-inverter series New inverter RZF-C series
(average) (average)
(cassette type) (cassette type)
Previous
1,170 1,170 1,345
non-inverter 770 mm mm mm
0 New inverter
695 990
RZF-C 595 mm mm
Inverter RZF50CVM RZF60CVM RZF71CVM RZF100CVM RZF125CYM RZF140CYM mm
series
Non Inverter R71LUVAL R100LUVAL R125LUYAL R140LUYAL 845mm 930mm
940mm
Total cost =
New Inverter (RZF-C series) of 30 minutes).
Usual Inverter (RZR-L series) This results in lower total cost.
Inverters save more
Non inverter energy over time
Capacity
Time
Recovery point
INV Max
Non Max Inverter air conditioner can adjust its Rated condition
Better performance
cooling capacity according to the
than non-inverter models! cooling load. This results in less
Reaches maximum capacity faster
than usual inverter models.
power consumption. Non inverter cooling capacity
Capacity
Load
In response to fluctuating cooling load, Non inverter On/Off operation
air conditioners repeatedly perform ON (full-power)/ Lower efficiency Inverter cooling capacity
Time OFF (zero-power) operation. Inverter air conditioners,
Start
however, operate at optimal cooling capacity according
BRC1E63 wired remote controller to the cooling load. Since inverter air conditioners Cooling load Partial load area
Indoor is used for ‘Quick cooling start’. provide required minimum cooling capacity with
Reaches the
temp. minimum electrical power, total power consumption 0
set temperature faster. 35
can be reduced during cooling period.
Outdoor ambient temperature (°C)
Setting
temp.
Start Time
Indoor Removes Continuous driving without stopping and starting is Constantly stopping and starting consumes energy
humidity humidity faster. more fuel efficient. and is less fuel efficient.
Start
Why is inverter technology more comfortable?
Non inverter Inverter
When temperature does not
fluctuate much, the set
temperature is maintained.
Start Time Inverter control responds to load changes
and causes minor temperature adjustments. Room
temperature Too hot
Non-inverter control frequently turns ON and
OFF in response to load fluctuations or load Large
temperature
mismatch and causes large temperature fluctuation
swings.
Set
temperature
Non inverter
Comfortable
Small
temperature
fluctuation
Inverter
Non inverter
Too cold Too cold
Time
13 14
Durability Convenient Functions
Overvoltage PCB Microchannel heat exchanger Navigation remote controller BRC1E63 includes various
(Outdoor unit option) See page 54
Microchannel technology utilises superior heat transfer convenient functions
benefits of aluminium to create a more efficient air Automatic return to temperature preset by owner. Owner can preset upper and lower temperatures.
Unstable power supply is a common problem in many conditioner.
regions. It can cause overvoltage which can significantly With a new resistance corrosion aluminium alloy, the Setpoint auto reset Setpoint range set
damage electronic devices. Daikin microchannel heat exchanger becomes highly - Even if the set temperature is - Saves energy by limiting the min.
To prevent voltage fluctuations, it is usually necessary to durable. changed, the new set and max. set temperature.
attach a stabiliser when installing an air conditioner. A salt spray test has been conducted to demonstrate the temperature returns to the - Avoids excessive heating or
The RZF-C series is equipped with a highly-durable corrosion-resistant capability of our products in previous preset value after a cooling.
electronic circuit. preset duration of time. - This function is convenient if the
corrosive environments for a certain period of time.
- Period selectable from 30, 60, remote controller is installed
This circuit eliminates the need for a stabiliser and offer
Test of durability 90, or 120 minutes. where anyone can change the
additional protection for devices in the outdoor unit, settings.
such as its fan motor and compressor. - Testing organization MTEC Thailand
- Testing standard ASTM B117
- Result
Restaurant example
Automatic protection against Before testing After testing
low voltage Restaurant opened Full tables at lunchtime After 30 minutes*
27 °C 24 °C
In AM and PM peak electricity consumption periods, Returns to
supply may fluctuate. Built-in low-voltage protection will
automatically cut operations. When normal voltage is 27 °C
restored, operation will resume as before. Normal Under automatically
observation telescope
No evidence of corrosion was observed
Outdoor unit installation is After undergoing an intensive test, the Daikin microchannel
Then is lowered to 24ºC Automatically returns to
heat exchanger is able to maintain its shape without Temperature is set to 27ºC
possible even with limited space corrosion, which strongly confirms its durability in a highly for crowded room preset temperature (27ºC)
corrosive environment. *Preset-return time can be set at 30, 60, 90, or 120 min
consumption
100
m 10 mo or
caused by humidity Maximum power consumption can be set at 40, 60, 70, 80, or 100%.
mo m or mm and airborne dust.
Power
re 0 r e
50 mo It also protects
against salt contained
in sea breezes.
8:00 12:00 16:00 20:00 Time
Both sides of the PCB
in outdoor units are
coated. Night quiet operation mode
Consideration is given for people living nearby.
Outdoor unit operating sound can be reduced. *Field setting with remote controller
Self-diagnosis functions enable Peak outdoor temperature
Capacity (%)
The operating 100
An error message appears on the LCD of the remote noise bothers
controller and an LED lights up on the unit. 8 hours
me at night! 50 10 hours
When the BRC1E63 is installed, the error code appears
Load (%)
showing contact information and model name. Contact
0
your Daikin dealer and provide the error code and 48
model name.
Sound (dB(A))
Rated
Operating
Quiet mode
44 Quiet mode
15 16
Reuse of Existing Piping Design Flexibility
Benefit 1 Possible to forced OFF and ON/OFF operation using external command
*Field setting with remote controller
Simplified installation reduces replacement time and cost
Round flow cassette type Duct connection middle static pressure type
Where feasible, we reduce work costs and time by reusing existing pipes*. External Equipment Interlock (FCF-C series only)
Power conservation is possible though interlock* of external equipment, *Optional adaptor for wiring: KRP1C11A is necessary.
such as lighting, with the infrared presence sensor.
*Strict conditions apply, please check the table on page 37 for acceptable pipe sizing (if pipes are to be reused).
Human presence is detected by the built-in infrared Sensor The presence detection signal of the infrared presence sensor
presence sensor in the sensing panel, and the interlock can turn only external equipment ON/OFF without interlocking
mode with air conditioner operation/stop (ON/OFF).
Benefit 2 presence detection signal can be output and interlocked
with external equipment such as ventilation and lighting
You can increase cooling capacity and achieve higher energy efficiency equipment.
Upgrade to an air conditioner with the latest technology for greater comfort and energy efficiency.
External equipment also
Presence Sensor Sensor automatically turns ON/OFF.
detection Undetected Detected
signal Contact OFF Contact ON Further energy savings
R22 R32 Lighting Ventilation and power conservation
Non inverter inverter equipment equipment
8.1 kW 14.0 kW Infrared presence Note:
class class sensor information Adaptor for wiring: When the presence detection signal is output to external equipment using the adapter
KRP1C11A (Option) for wiring, other functions, such as interlock with the duct booster fan and the output
of other signals, become disabled.
φ9.5 φ15.9 φ9.5 φ15.9
Pipes used
as they are!
Indoor units comply with D -Net standards
As a result, the greater capacity units
FHYC71KVE FCF140CVM ensure better performance to cope
R71LUVAL RZF140CVM
with the increasing amount of heat Previous indoor unit New indoor unit
CSPF: 2.64 CSPF: 5.00 generated by office equipment and
occupants.
Adaptor not
Technology required
Optional
Advanced technology, including the use of corrosion resistant electronic expansion valves, acid neutralisers and improved FHQ-BV interface adaptor
compressor reliability, enables the re-use of existing piping* without the need of pipe flushing for a simplified replacement process. is required FHA-B
Acid neutraliser
Filter or
accumulator
Acid (chlorine ion)
Compressor
Refrigerant pipe
*Strict conditions apply, please check the table on page 37 for acceptable pipe sizing (if pipes are to be reused). Easy connection to DIII-NET and long piping length makes this solution suitable for projects including and SkyAir.
17 18
Smart Airflow Control Detail of Each Product Specification
Indoor units can provide 5-step and 3-step fine control of air volume
5-step: FCF and FHA series
3-step: FBA, FAA, and FVA series
CEILING MOUNTED
Comfort ensured by ‘Auto’ CASSETTE TYPE FCF-C Series Page 21
airflow rate that matches Round Flow
load level
Convenient energy-efficiency for stores
with peak and quiet periods.
DUCT CONNECTION
Level 1 (Low) Level 2 Level 3 (Medium) Level 4 Level 5 (High) Auto
MIDDLE STATIC FBA-B Series Page 29
PRESSURE TYPE
Also convenient for high ceilings and spaces with long blow distances
*Field setting with remote controller
Cassette type <Round Flow>: Ceiling suspended type:
maximum 4.2 m* maximum 4.3 m
4.2 4.3
m m
See page 25 See page 32 FLOOR STANDING TYPE FVA-A Series Page 35
More Economy or Comfort in Special Situations OUTDOOR UNIT RZF-C Series Page 37
19 20
CEILING MOUNTED CASSETTE TYPE Round Flow See P. 3-6 for new
functions of Round
New Round Flow
Cassette movie at
Flow Cassette. Daikin official
Circulation Airflow
NEW
Cooling only BRC7M635F
Selectable Airflow Pattern
(Fresh white)
BRC7M635K
(Black)
Because air flows out from corner outlets, comfort spreads more widely.
Signal receiver unit
(Installed type)
Typical flow patterns There are a total of 18 flow patterns.
Wireless remote controller is supplied in a
set with a signal receiver.
L-shaped Opposite
All-round flow 3-way flow
2-way flow 2-way flow
Panel variations
Dual Sensors*1
Comfort and Energy Saving Preventing Overcooling*6 *6.Airflow direction and airflow
rate should be set to “Auto”.
B D
Ceiling height 2.7m 3.5m 4.0m Energy The temperature near the person is automatically calculated by detecting the temperature of the
A savings floor. Energy is saved because the area around the feet does not get too cold.
Detection range approx. approx. approx.
(diameter)*4 11m 14m 16m
Detecting the
*4. The infrared floor sensor detects at the floor surface.
Sensing Sensor Functions*7,8 *7. These functions are not available when using the group control system.
*8. User can set these functions with remote controller.
Standard range for infrared presence sensor *
average temperature
of the floor Sensing sensor low mode (default: OFF)
When there are no people in a room,
2.7m
ceiling the set temperature is shifted automatically. Operation is
height
- The system automatically saves energy by detecting reduced in places
whether or not the room is occupied. The set temperature is where there are
shifted automatically if the room is unoccupied. no people.
80cm
above floor 約8.5m
approx.8.5m • Cooling set temperature: 26°C • Shift temperature: 1.0°C
Example
*[Concerning infrared presence sensor] • Shift time: 30 min. • Limit cooling set temperature: 30°C
When human presence is not detected When human presence is detected Shift temperature and time can be selected from 0.5 to 4°C in 0.5°C increments and 15, 30, 45, 60, 90 or 120 minutes respectively
with remote controller.
*9. On basic screen of remote controller, set temperature does not change.
23 24
CEILING MOUNTED CASSETTE TYPE Round Flow
Control of airflow rate has been improved from 3-step to 5-step. Indoor unit
Sound pressure level *2.Body height (ceiling required space) is 55 mm higher than standard panel.
Auto airflow rate is newly available. H HM M ML L *When the ceiling space is limited, an optional panel spacer is available.
50-71C 37.0 34.5 32.0 29.5 27.5 (see P.28)
Suitable for high ceilings 125/140C 46.0 43.0 40.0 36.0 32.5
Easy height adjustment
Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.
Each corner of the unit has an Ease in temporary hanging
Criteria for ceiling height and number of air discharge outlets
Standard Setting Setting
(Ceiling height is reference value)
adjuster pocket that lets you
easily adjust the unit's
of decoration panel
Number of air discharge outlets used suspended height. In addition to the temporary
50-71C 100–140C hanging fixtures in 2 places
3.6 4.2 All round 4-way 3-way 2-way All round 4-way 3-way 2-way
Note: normally used, corner part
3.2 m flow flow flow flow flow flow flow flow If the wireless remote controller is installed,
mounting fixtures in 4 places
m m a signal receiver unit is housed in one of
Standard 2.7 m 3.1 m 3.0 m 3.5 m 3.2 m 3.4 m 3.6 m 4.2 m the adjuster pockets. are provided.
Ceiling
height
High ceiling 3.0 m 3.4 m 3.3 m 3.8 m 3.6 m 3.9 m 4.0 m 4.2 m Corner part mounting
High ceiling 3.5 m 4.0 m 3.5 m - 4.2 m 4.5 m 4.2 m - fixtures (in 4 places) Temporary hanging
fixtures (in 2 places)
Note:
When all round flow is selected, ceilings up to 4.2 m in height
can be accommodated. (100-140C)
The aforementioned is for standard panels. See the installation manual for designer panels.
Factory settings are for standard ceiling height and all-round flow. Temporary placement of control Drain pump
High ceiling settings (1) and (2) are set with the remote controller by field setting.
High-efficiency filters are not available for high ceiling applications. box lid Equipped as standard
accessory with
Because the control box lid can be temporarily hung 850 mm
Humidity sensor on the unit, there is no need to climb down the
850 mm lift.
Not only temperature but also humidity is stepladder to retrieve it.
detected, and adjustments are made for 175 mm
comfortable air conditioning.
should be changed once Prevents mould and microorganisms growing out of the when multiple units are surface *High-efficiency filter, ultra long-life filter, and
fresh air intake
every two to three years.) dust and moisture that adheres to the filters. installed.
25 26
CEILING MOUNTED CASSETTE TYPE Round Flow
KDDP55B160K
Ultra long-life filter (option) Insulation kit for high humidity Flexible duct
See page 28 Please use if you think the temperature and humidity T-duct joint
inside the ceiling exceeds 30°C and RH 80%, Suction
Maintenance is not required in normal shops or respectively. chamber Intake duct
(obtained locally)
offices for up to four years. Connection (duct length: 4 m max.)
Top panel insulation(1) chamber
Top panel insulation(2) Direct installation type
Low gas pressure detection Top panel insulation(3)
Note 6
KDDP55X160A
Insulation for decoration panel
Side panel insulation
Suspension bracket insulation
27 28
DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE
Design and Installation Flexibility
installation flexibility
with narrow ceiling spaces. range of 50 Pa to 150 Pa by using a DC fan motor.
245mm 50 Pa 150 Pa
NEW
One of the industry’s most compact
FBA50/60/71/100/125/140BVMA bodies in the mid-static pressure range.
Set to low static
pressure when ducts
Set to high static pressure for
advanced needs such as when
are short. using dampers and long ducts.
Indoor unit 50/60/71B 100/125/140B
Height (mm) 245 Comfort airflow is achieved in accordance with conditions
Width (mm) 1,000 1,400 such as duct length.
Depth (mm) 800
Easy Maintenance
(Separate type) plate Make the control box flange
face inward. Bottom plate
Clean
Inspection
opening for
drain pan
Simultaneous air conditioning of two rooms and ventilation grille (ventilation opening) Drain pan
When air conditioning two rooms
simultaneously, the air discharged into
Door-installed
ventilation grille
Wall-installed
ventilation grille Under-door cutout Silver ion anti-bacterial drain pan maintenance
check window
each room must be circulated back to A built-in antibacterial treatment that uses silver ion in the
the air conditioner. To achieve this, a drain pan prevents the growth of slime, bacteria, and mould
ventilation duct should be installed for
High Efficiency
Ventilates air through
Partitioning wall
the partitioning wall. that cause odours and clogging.
each room or one of the indicated
ventilation grilles should be installed
(See right)
Ventilation grille Ventilation grille Under-door cutout
(The lifespan of a silver ion
on the partitioning wall or under the cartridge depends on the
door between the rooms.
Note: The under-door cutout method should be used only when there is a small volume of airflow.
usage environment, but DC fan motor and DC drain pump
should be changed once These are utilised to improve energy efficiency.
every two to three years.)
29 30
CEILING SUSPENDED TYPE
Stylish Model Installation Flexibility for
Comfort
installation
The unit fits more
snugly into tight
spaces.
30 mm
or more
30 mm
or more
Easy Maintenance
included and must be obtained
locally.
4.3
3.5 m
m
Drain pump kit (option) includes a
Wireless LCD remote controller silver ion antibacterial agent
A signal receiver must be added to the indoor unit.
50-71BVMA 100-140BVMA That assists in preventing the growth of slime, bacteria,
and mould that cause odours and clogging.
NEW 50-71B 100B 125/140B
Cooling only BRC7M56 Standard 2.7m or less 3.8m or less 4.3m or less
High ceiling 2.7m-3.5m 3.8m-4.3m - Non-flocking flap
Note: Factory settings is “standard”. Condensation does not easily
“High ceiling” are set with remote controller by field setting. form and dirt does not cling to
non-flocking flap.
Signal receiver unit (Installed type) It is easy to clean. Non-flocking flap
Wireless remote controller is supplied in
a set with a signal receiver.
Switchable fan speed: 5 steps and Auto
Control of airflow rate has been improved from 3-step to 5-step.
Auto airflow rate is newly available. Easy-clean, flat surfaces
It is easy to wipe dirt off the flat side and lower surfaces
of the unit.
Quiet Operation
dB(A)
Sound pressure level
Oil Resistant Grille
Indoor unit
H HM M ML L
Oil-resistant plastic is used for the
50/60B 37.0 36.0 35.0 33.5 32.0
38.0 37.0 36.0 35.0 34.0
air suction grille.
71B
This satisfies durability in restaurants and other similar
100B 42.0 40.0 38.0 36.0 34.0 environments.
125B 44.0 42.5 41.0 39.0 37.0 Note: Intended for use in salons, dining rooms, and ordinary sales floors,
140B 46.0 44.0 42.0 40.0 38.0 this specification is not suitable for kitchens or other harsh environments.
31 32
WALL MOUNTED TYPE
Compact & Sophisticated Design Design and Installation Flexibility
easy installation
Height 360mm 340mm Left pipe
340
greater
Width 1,570mm 1,200mm
mm
installation
1,200mm Depth 200mm 240mm
flexibility Back-left pipe
370mm shorter Weight 26kg 17kg Bottom-left pipe
NEW Back-right pipe
Right pipe
FAA71/100BVMA Bottom-right pipe
Auto swing (up and down) and wide-angle Drain pump kit is available as option
louvers (left and right by hand) Installs onto side of unit.
Refrigerant
piping
Wide-angle louvers (by hand) 1,000 mm
Soft material louver bends airflow over
a wider area
Option Indoor unit
Drain pump kit
Accessory required for indoor unit.
Drain pump kit can be installed on
Navigation Remote Controller either left and right side of the indoor
(Wired Remote Controller) An air discharge Auto-swing 5-level air direction setting
unit.
NEW modes ensure
BRC1E63 comfortable air
Note: Remote controller cable is not
distribution across Adjustable to 5
Interlock control
included and must be obtained
locally. the entire room different levels
As an energy saving feature, the room air
conditioning unit can be interlocked with the key card
system.
Interlock
Air discharge strength is selected
from the remote controller by field
setting.
* Field setting with
Signal receiver unit (Installed type)
remote controller
Wireless remote controller is supplied in a
set with a signal receiver. Switchable fan speed: 3 steps and Auto
“Auto” is applicable when BRC1E63 is used.
DIII-NET communication
Programme "Dry" standard
Dehumidification is microprocessor controlled to prevent abrupt Connection to a centralised control system is
and uncomfortable changes in air temperature. available without need for an optional adaptor.
Easy Cleaning
Removable and Flat panel, easy to Non-flocking flaps
washable grille wipe dust off Condensation does not easily form
and dirt does not cling to non-flocking
flaps.
It is easy to clean.
33 34
FLOOR STANDING TYPE
Comfortable Airflow Control
New airflow control for Left and right directions (by remote controller) (Applicable when BRC1E63 is used.)
Auto swing direction is selectable from 3 patterns to suit the layout of the room.
NEW
FVA50/60/71/100/125/140A
When installed in the center of a wall. When installed in the corner of a room.
Motor efficiency
post-installation piping work. *Although pumping-down operation allows most of the refrigerant to be High efficiency during partial load
recovered in a short period of time, some refrigerant will remain inside the
indoor unit and refrigerant piping. DC motor
operation.
Using a refrigerant recovery machine, recover remaining refrigerant from
Removable part of bottom the stop valve service port until the pressure falls to 0.09 MPa. (gauge
pressure:-0.011MPa) or less.
More than 20%
Energy savings is realised,
frame makes the piping AC motor eliminating the friction and the
work easier (RZF125-140C) Separation
Low gas pressure detection function leakage of refrigerant gas.
Swing bushing
available Effective gas monitoring reduces the labor required Refrigerant gas
for operation, maintenance, and repairs. Rotational speed
Small load Large load
Low capacity High capacity
Night Quiet Operation Mode 3 High efficiency by micro channel heat exchanger Reduced wind resistance
The flattening of the heat exchanger tubes
Peak outdoor temperature improves the flow of air and increases heat
The automatic night quiet mode will Sound pressure level1 exchange efficiency.
Capacity (%)
(dB(A))
initiate 8 hours after the peak Cooling
only
Rated2 Night Quiet
100
Conventional tube and fin coil Micro channel coil Conventional heat
exchanger
Micro channel
heat exchanger
temperature is reached in the daytime, Mode 8 hours
50 10 hours
The diameter of the The diameter of the
Rated
tubes
Operation
Quiet mode
Reducing noise will reduce capacity slightly. RZF125C 52 45 44 Quiet mode
Approx.
Note : 1Anechoic chamber conversion value, measured according to JIS parameters RZF140C 54 45 8:00 12:00 16:00 20:00 0:00 4:00 8:00 Approx.
1mm
7mm
and criteria. Note : Daikin date for RZF71C Utilizing flat, multi-hole heat exchanger tubes increases
Operating sound about 4 dB quieter
During operation these values are somewhat higher owing to ambient conditions. the heat exchange area and realizes energy savings.
2
Value when cooling. Value will differ when heating. Flow of refrigerant Flow of refrigerant
Fan
Demand Control Function 4
Maximum power use is maintained within a set level of system V-cut propeller fan Imitating the performance
capacity. This enables effective demand control while Φ440 for RZF50-71CVM of the swan
Φ550 for RZF100CVM,
maintaining comfort. Maximum power consumption can be set
RZF71-100CYM
at 40, 60, 70, 80, or 100%. 8:00 12:00 16:00 20:00 Time
37 38
REMOTE CONTROLLER Optional accessory
Easy-to-read LCD remote controller allows various system control configurations and can control multiple indoor units.
Remote controller options are shown on the page introducing each indoor unit model.
BRC7M635F
Signal receiver unit
(For ceiling mounted cassette type)
Energy saving
Wireless remote controller for each indoor unit type
Setpoint auto reset Setpoint range set Cooling only
- Even if the set temperature is changed, the new set temperature returns to the - Saves energy by limiting the BRC7M635F (Fresh white)
previous preset value after a preset duration of time. min. and max. set temperature. NEW CEILING MOUNTED CASSETTE TYPE
BRC7M635K (Black)
- Period selectable from 30, 60, 90, or 120 min. - Avoids excessive heating or DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE BRC4C66
Restaurant example cooling. NEW CEILING SUSPENDED TYPE BRC7M56
Restaurant opened Full tables at lunchtime After 30 minutes* - This function is convenient if WALL MOUNTED TYPE BRC7EB519
Temperature is set to 27ºC Then is lowered to 24ºC for Automatically returns to preset the remote controller is installed FLOOR STANDING TYPE BRC4C66
crowded room temperature (27ºC) where anyone can change the
Returns to
settings.
27°C 24°C 27 °C
automatically
39 40
REMOTE CONTROLLER Optional accessory
For simultaneous
Group control control of up to 16
indoor units. Automatic address setting function Automatic address setting function
Signal receiver unit installed
on 1 indoor unit
Centralised control of
Centralised remote up to 64 indoor groups
control from remote location
up to 1 km away.
Interface adapter for SkyAir series (option) is Interface adapter for SkyAir series (option) is
required required
Note: 1BRC1E62 can connect to BRC1E62 only. BRC1E63 can connect BRC1E63 only. 2
When a wireless remote controller is used, it is not possible to use 2 wireless remote controllers.
Combination of BRC1E63 (main) and BRC7M (sub) is available.
Centralised control, with setting as Centralised control of on/off by Unified control of weekly schedule With its high functionality, the full
simple as it is with a standard group or all at once for up to 256 for up to 1,024 indoor units. colour “all-in-one” graphic controller
remote controller, of up to 64 groups indoor units. Schedule timer sets on/off time in 1 minute units facilitates management of SkyAir
(1,024 indoor units) is possible. to be executed twice a day for a week at a time. System in a variety of ways.
41 42
FUNCTIONS
CEILING MOUNTED CASSETTE TYPE Round Flow DUCT CONNECTION MIDDLE CEILING SUSPENDED TYPE WALL MOUNTED TYPE FLOOR STANDING TYPE
STATIC PRESSURE TYPE
10 Circulation airflow *1 10
11 Setback *1 11
12 Quick start *1 12
13 Individual airflow control *1 13
14 Infrared presence sensor Sensing panel 14
15 Infrared floor sensor Sensing panel 15
16 Humidity sensor 16
17 Auto airflow function *1 Sensing panel 17
Comfort
18 Auto swing 18
19 Swing pattern selection 19
20 Switchable fan speed 5 step 5 step 20 3 step 3 step 5 step 5 step 3 step 3 step 3 step 3 step
32 Pre-charged for up to 30 m *3 32
33 Long-life filter 33 *6
Work &
34 Filter sign 34
Servicing
35 Low gas pressure detection *3 35
36 Emergency operation 36
37 Self-diagnosis function 37
38 Service contact display *1 38
39 Auto-restart 39
40 Control by 2 remote controllers *7 40 *7
48 High-efficiency filter 48
49 Ultra long-life filter 49
Options
50 Fresh air intake kit 50
51 Overvoltage PCB *3 51
Note: *1: Applicable when BRC1E63 is used *2: Not applicable when group control *3: For outdoor units *6: Option is requied *7: It is not possible to use 2 wireless remote controllers. Combination of BRC1E63 (main) and BRC7M (sub) is available.
*4: Adaptor for Wiring (and installation box) is necessary *5: Wiring adaptor for electrical appendices (and installation box) is necessary *8: Applicable for FVA50-100
43 44
FUNCTIONS
Cleanliness
Abundance of functions that provide comfortable 26. Anti-bacterial air filter 28. Silver ion anti-bacterial drain pan
air-conditioning in stores and offices The air filter has an anti-bacterial treatment to help prevent the
growth of bacteria and mould on it.
A built-in antibacterial treatment that uses silver ion in the drain pan
prevents the growth of slime, bacteria, and mould that cause odours
Note: Some features are only available on selected models. See overview pages for full list of features applicable to each unit. and clogging.
27. Mould-proof air filter
29. Mould-proof drain pan
Energy Saving Sanitary filter has mould-resistant treatment.
Mould-proof drain pan prevents growth of mould in highly humid
conditions.
1. Energy consumption monitoring 6. Setpoint range set
Past power consumption is displayed for the current and previous Saves energy by limiting the minimum and maximum set temperatures.
days as well as in weekly and yearly intervals. Avoids excessive heating and cooling.
Work & Servicing
2. Sensing sensor stop mode 7. OFF timer (programmed)
When the room is unoccupied, the system stops automatically. Sets and saves setting for an increment of time that automatically 30. Auto grille panel 35. Low gas pressure detection
turns off air conditioner after a preset period of time for each time Grille and air filter cleaning can be performed without need for Insufficient gas charging is normally hard to detect. During test run
3. Sensing sensor low mode operation starts. a stepladder by lowering the grille. after installation and regular inspection, the refrigerant level is
When the room is unoccupied, the set temperature is shifted monitored by a microprocessor to maintain proper gas pressure.
automatically. 8. Weekly schedule timer 31. Drain pump mechanism Reliability is assured and maintenance and inspection can be carried
Up to five operation ON/OFF settings can be programmed per day for Steeper gradient realises more efficient out more quickly.
each day of the week. Not only can the time be set for the operation condensate drainage. High-lift is especially
4. Auto display OFF useful for long lengths of drain piping.
While operation is stopping, the LCD display can be turned off.
ON setting, but also the temperature. 36. Emergency operation
It can be displayed again when any button is pressed.
9. ON/OFF timer 32. Pre-charged for up to 30 m Even if there is a malfunction elsewhere in the system, the fan or
compressor can still be operated. (depending on the malfunction)
If refrigerant piping length does not exceed 30 m, there is no
Operation starts when the preset time of the ON timer elapses and
5. Setpoint auto reset need for on-site gas charging.
Even if the set temperature is changed, the new set temperature
stops when the preset time of the OFF timer elapses.
37. Self-diagnosis function
returns to the previous preset value after a preset duration of time.
33. Long-life filter The operating parameters of indoor and outdoor units, and sensor
Maintenance is not required for one year*. data at critical locations throughout the system, are constantly
The filter is washable and can be reused. monitored using a microcomputer. To facilitate quick response in the
*For dust concentration of 0.15 mg/m3 event of a malfunction, a message appears on the LCD of the remote
controller and an LED on the unit illuminates.
Comfort 34. Filter sign
The filter sign warns you when it is time to clean the filter.
38. Service contact display
10. Circulation airflow 19. Swing pattern selection *When using a wired remote controller the sign is displayed in the LCD.
When using a wireless remote controller the filter sign lamp illuminates When installing the unit, registration of the service contact is available
At the start of operation, airflow changes repeatedly between You can freely set air discharge settings by remote controller. on the signal receiver unit. to the wired remote controller.
horizontal flow and downward flow (swing during cool operation), (1) Standard (2) Draft prevention (3) Ceiling soiling
and air is sent throughout the room to eliminate uneven setting setting prevention setting
temperatures.
Control
11. Setback
Maintains the room temperature in a specific range during 39. Auto-restart 43. External signal forced OFF and ON/OFF operation
unoccupied periods by temporarily starting an air conditioner that
had been turned OFF. 20. Switchable fan speed If there is a power outage while the equipment is operating,
operations will restart in the same mode as before the power
The air conditioner can be interlocked with the keycard system and
turned ON/OFF by locking and unlocking the room.
High setting provides maximum reach while low setting minimises drafts.
cut when electricity is restored. The air conditioner can be also be turned OFF by the interlock with
12. Quick start the ventilation and lighting OFF signal.
At operation start, capacity priority operation is possible. 21. Auto airflow rate 40. Control by 2 remote controllers *Field setting with remote controller.
Airflow rate is automatically controlled in accordance with the Using 2 remote controllers you can operate the equipment
13. Individual airflow control difference between room temperature and set temperature. locally or from a remote location. 44. External command control
Airflow direction can be individually adjusted for each air *When a wireless remote controller is used, it is not possible to use 2 Operation and monitoring is carried out using the contact signal from
wireless remote controllers.
discharge outlet to deliver optimal air distribution. 22. High fan speed mode Combination of BRC1E63 (main) and BRC7M (sub) is available.
the operation control box in the building monitoring room.
*Wiring adaptor for electrical appendices (and installation box) is necessary.
You can increase fan speed approximately 10% higher than the
14. Infrared presence sensor "high" setting. 41. Group control by 1 remote controller
The sensor detects the presence of people in each of the 4 areas. You can turn up to 16 indoor units ON/OFF with a single 45. Central remote control
remote controller. (When using connected indoor units, the Optional central remote controller enables centralised control of up to
23. Two selectable temperature-sensors settings must all be the same and on/off will be simultaneous.) 1024 indoor units (64 groups) from up to 1 km away.
15. Infrared floor sensor Temperature-sensors are included in
The sensor detects the floor temperature and automatically the indoor unit and optional wired 42. External equipment interlock 46. Interlock control with Heat Reclaim Ventilator
adjusts operation of the indoor unit to reduce the temperature remote controller. Temperature sensing Human presence is detected by the built-in infrared presence
closer to target area is possible to Enables interlocking control with external equipment such as Heat
difference between the ceiling and the floor. sensor in the sensing panel, and the presence detection
further increase the comfort level. Reclaim Ventilator.
signal can be output and interlocked with external equipment.
16. Humidity sensor Use the temperature-sensor in the indoor unit when Power conservation is possible though the interlock of
Not only temperature but also humidity is detected, and
controlling air conditioning from another room. external equipment, such as lighting, with the infrared 47. DIII-NET communication standard
Note: Wireless remote controllers have no temperature-sensor. presence sensor. Connection to a centralised control system is available
adjustments are made for comfortable air conditioning.
*Adaptor for Wiring (and installation box) is necessary. without need for an optional adaptor.
45 46
SPECIFICATIONS
CEILING MOUNTED CASSETTE TYPE < Round Flow > ( 1 Phase ) DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE ( 1 Phase )
50 60 71 100 125 140 50 60 71 100 125 140
Indoor unit FCF50CVM FCF60CVM FCF71CVM FCF100CVM FCF125CVM FCF140CVM Indoor unit FBA50BVMA FBA60BVMA FBA71BVMA FBA100BVMA FBA125BVMA FBA140BVMA
Model Model
Name Outdoor unit Name Outdoor unit
RZF50CVM RZF60CVM RZF71CVM RZF100CVM RZF125CVM RZF140CVM RZF50CVM RZF60CVM RZF71CVM RZF100CVM RZF125CVM RZF140CVM
Power supply Outdoor unit 1 Phase / 220-230V / 60Hz Power supply Indoor unit 1 Phase / 220-230V / 60Hz
Cooling Capacity 1,2 5.0 6.0 7.1 10.0 12.5 14.0 Outdoor unit 1 Phase / 220-230V / 60Hz
Rated (Min. - Max.) kW (3.2-5.6) (3.2-6.0) (3.2-8.0) (5.0-11.2) (5.7-14.0) (6.2-15.5)
Cooling Capacity 1,2 5.0 6.0 7.1 10.0 12.5 14.0
Rated (Min. - Max.) kW (3.2-5.6) (3.2-6.0) (3.2-8.0) (5.0-11.2) (5.7-14.0) (6.2-15.5)
17,100 20,500 24,200 34,100 42,700 47,800
Btu/h (10,900-19,100) (10,900-20,500) (10,900-27,300) (17,100-38,200) (19,500-47,800) (21,200-52,900) 17,100 20,500 24,200 34,100 42,700 47,800
Btu/h (10,900-19,100) (10,900-20,500) (10,900-27,300) (17,100-38,200) (19,500-47,800) (21,200-52,900)
Power consumption Cooling kW 1.14 1.53 1.93 2.97 4.18 5.47
COP W/W 4.39 3.92 3.68 3.37 2.99 2.56 Power consumption Cooling kW 1.35 1.64 2.15 3.01 4.44 5.69
CSPF Wh/Wh 6.60 6.31 6.17 5.50 5.15 5.00 COP W/W 3.70 3.66 3.30 3.32 2.82 2.46
Indoor unit Colour Unit ---------- CSPF Wh/Wh 5.51 5.30 5.19 4.88 4.70 4.47
Decoration panel Fresh white Indoor unit Colour ----------
Airflow rate 3
m /min 23.0 / 21.0 / 18.5 / 16.0 / 13.5 34.5 / 31.0 / 27.5 / 24.0 / 20.0 36.5 / 33.0 / 29.0 / 25.0 / 21.0 Fan Airflow rate (H/M/L) m3/min 18.0 / 15.0 / 12.5 23.0 / 19.5 / 16.0 32.0 / 27.0 / 22.5 36.0 / 30.5 / 25.0
(H / HM / M / ML / L) cfm 812 / 741 / 653 / 565 / 477 1,218 / 1,094 / 971 / 847 / 706 1,288 / 1,165 / 1,024 / 883 / 741 cfm 635 / 530 / 441 812 / 688 / 565 1,130 / 953 / 794 1,271 / 1,077 / 883
Sound pressure level 3 (H / HM / M / ML / L) dB(A) 37.0 / 34.5 / 32.0 / 29.5 / 27.5 45.0 / 41.5 / 38.0 / 35.0 / 32.5 46.0 / 43.0 / 40.0 / 36.0 / 32.5 External static pressure 3 Pa Rated 50 (50-150)
Dimensions Unit mm 256X840X840 298X840X840 Sound pressure level 4 (H/M/L) dB(A) 35.0 / 33.0 / 31.0 38.0 / 35.0 / 33.0 40.0 / 37.5 / 35.0
(HXWXD) Decoration panel mm 50X950X950 Air filter 5 ----------
Machine Unit kg 22 24 Dimensions (HXWXD) mm 245X1000X800 245X1400X800
weight Decoration panel kg 5.5 Machine weight kg 37 47
Certified Operation range °CWB 14 to 25 Certified Operation range °CWB 14 to 25
Outdoor Colour Ivory white Outdoor Colour Ivory white
unit Coil Type Micro channel unit Coil Type Micro channel
Compressor Type Hermetically sealed swing type Compressor Type Hermetically sealed swing type
Motor output kW 1.30 1.60 2.40 Motor output kW 1.30 16.0 2.40
Refrigerant charge (R32) kg 1.2(Charged for 30 m) 1.3(Charged for 30 m) 1.9(Charged for 30 m) Refrigerant charge (R32) kg 1.2(Charged for 30 m) 1.3(Charged for 30 m) 1.9(Charged for 30 m)
Sound Cooling dB(A) 48 49 52 54 Sound Cooling dB(A) 48 49 52 54
pressure level 3 Night quiet mode pressure level 4
dB(A) 44 45 Night quiet mode dB(A) 44 45
Dimensions (HXWXD) mm 595X845X300 695X930X350 990X940X320 Dimensions (HXWXD) mm 595X845X300 695X930X350 990X940X320
Machine weight kg 41 48 64 Machine weight kg 41 48 64
Certified Operation range °CDB 21 to 46 Certified Operation range °CDB 21 to 46
Piping Liquid (Flare) mm 9.5 Piping Liquid (Flare) mm 9.5
connections Gas (Flare) mm 15.9 connections Gas (Flare) mm 15.9
Drain Indoor unit mm VP25 (I.D. 25XO.D. 32) Drain Indoor unit mm VP25 (I.D. 25XO.D. 32)
Outdoor unit mm 26.0 (Hole) 18.0 (Hole) 26.0 (Hole) Outdoor unit mm 26.0 (Hole) 18.0 (Hole) 26.0 (Hole)
Max. interunit piping length m 50 (Equivalent length 70) Max. interunit piping length m 50 (Equivalent length 70)
Max. installation level difference m 30 Max. installation level difference m 30
Heat insulation Both liquid and gas piping Heat insulation Both liquid and gas piping
47 48
SPECIFICATIONS
100
Note :
1
Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
2
Capacities are net, including a deduction for cooling for indoor fan motor heat.
3
The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.
49 50
SPECIFICATIONS OPTION
100
Indoor unit
FLOOR STANDING TYPE ( 1 Phase ) CEILING MOUNTED CASSETTE TYPE < Round Flow >
50 60 71 100 125 140
Kit name
Indoor unit FVA50AMVM FVA60AMVM FVA71AMVM FVA100AMVM FVA125AMVM FVA140AMVM Name of option Remark
Model FCF50CVM FCF60CVM FCF71CVM FCF100CVM FCF125CVM FCF140CVM
Name Outdoor unit RZF50CVM RZF60CVM RZF71CVM RZF100CVM RZF125CVM RZF140CVM Standard panel with Fresh white BYCQ125EEF
Sensing Black BYCQ125EEK
Power supply Outdoor unit 1 Phase / 220-230V / 60Hz
Decoration Fresh white BYCQ125EAF
Cooling Capacity 1,2 5.0 6.0 7.1 10.0 12.5 14.0 1 Standard panel
Rated (Min. - Max.) kW (3.2-5.6) (3.2-6.0) (3.2-8.0) (5.0-11.2) (5.7-14.0) (6.2-15.5) panel Black BYCQ125EAK
Designer panel 1 Fresh white BYCQ125EAPF
17,100 20,500 24,200 34,100 42,700 47,800
Btu/h (10,900-19,100) (10,900-20,500) (10,900-27,300) (17,100-38,200) (19,500-47,800) (21,200-52,900) Auto grille panel 2,3 Fresh white BYCQ125EASF
Power consumption Cooling kW 1.23 1.79 2.51 3.48 4.48 5.71 Sealing material of air discharge outlet 4 For usage of 3-, 4-way flow KDBH551C160
2
COP W/W 4.07 3.35 2.83 2.87 2.79 2.45 For usage of 2-way flow KDBH552C160
CSPF Wh/Wh 6.03 4.86 4.46 4.19 4.67 4.18 3 Panel spacer KDBP55H160FA
Indoor unit Colour Fresh white Fresh air intake kit Chamber Without T-duct joint KDDP55B160 (Components: KDDP55C160-1, KDDP55B160-2) 8
4 type 5,6 With T-duct joint KDDP55B160K (Components: KDDP55C160-1, KDDP55B160K2) 8
Airflow rate m3/min 18 / 16 / 14 28 / 25 / 22 28 / 26 / 24 30 / 28 / 26
(H / M / L) cfm 635 / 565 / 494 988 / 883 / 777 988 / 918 / 847 1,059 / 988 / 918 Direct installation type 7 KDDP55X160A
Sound pressure level 3 (H / M / L) dB(A) 43 / 41 / 38 50 / 47 / 44 51 / 48 / 46 53 / 51 / 48 High-efficiency filter unit 9 (Colorimetric method 65%) KAFP556C80 KAFP556C160
5 (Including filter chamber)
Dimensions (HXWXD) mm 1,850X600X270 1,850X600X350 (Colorimetric method 90%) KAFP557C80 KAFP557C160
Machine weight kg 42 50 Replacement high-efficiency filter 9,10 (Colorimetric method 65%) KAFP552B80 KAFP552B160
6
Certified Operation range °CWB 14 to 25 (Colorimetric method 90%) KAFP553B80 KAFP553B160
Ivory white 7 Filter chamber KDDFP55C160
Outdoor Colour
unit Coil Type Micro channel 8 Replacement long-life filter KAFP551K160
9 Replacement long-life filter (Auto grille panel) KAFP551H160
Compressor Type Hermetically sealed swing type
Motor output kW 1.30 1.60 2.40 10 Ultra long-life filter unit (Including filter chamber) 9 KAFP55C160
Refrigerant charge (R32) kg 1.2(Charged for 30 m) 1.3(Charged for 30 m) 1.9(Charged for 30 m) 11 Replacement ultra long-life filter 9,10 KAFP55H160H
Sound Cooling dB(A) 48 49 52 54 12 Branch duct chamber 4 KDJP55C80 KDJP55C160
pressure level 3 13 Insulation kit for high humidity 9,11 KDTP55K80 KDTP55K160
Night quiet mode dB(A) 44 45
Dimensions (HXWXD) mm 595X845X300 695X930X350 990X940X320 14 Remote controller Wireless type Cooling only BRC7M635F (Fresh white) / BRC7M635K (Black)
Machine weight kg 41 48 64 15 Navigation remote controller Wired type 12 BRC1E63
Certified Operation range °CDB 21 to 46 16 Central remote controller 13 DCS302CA61
Piping Liquid (Flare) mm 9.5 17 Unified ON/OFF controller 13 DCS301BA61
connections Gas (Flare) mm 15.9 18 Schedule timer 13 DST301BA61
Drain Indoor unit mm VP20 (I.D. 20XO.D. 26) 19 intelligent Touch Controller 13 DCS601C51
Outdoor unit mm 26.0 (Hole) 18.0 (Hole) 26.0 (Hole) 20 Adaptor for wiring 14 KRP1C11A
Max. interunit piping length m 50 (Equivalent length 70) 21 Wiring adaptor for electrical appendices 14 KRP4AA53
Max. installation level difference m 30 22 Installation box for adaptor PCB KRP1H98A
Heat insulation Both liquid and gas piping 23 Remote sensor (for indoor temperature) KRCS01-5B
Note: 1When installing designer panel, body height (ceiling required dimension) is 42 mm higher than 7
The volume of fresh air for direct installation type is approximately 1% of the indoor unit airflow.
standard panel. Designer panel cannot operate 2 and 3 way flow. The chamber type is recommended when more fresh air is necessary.
2
A dedicated remote controller (BRC16A2) for the auto grille panel is included for lowering and 8
Please order using the names of both components instead of set name.
raising the suction grille. 9
This option cannot be installed to designer panel and auto grille panel.
3
When installing auto grille panel, body height (ceiling required dimension) is 55 mm higher than 10
Filter chamber is required.
standard panel. 11
Please use in case temperature/humidity inside ceiling may get over 30˚C, 80% RH.
4
Circulation airflow is not available with this option. 12
Wiring for wired remote controller should be obtained locally.
5
When installing a fresh air intake kit (chamber type), two air outlet corners are closed. 13
The indoor unit is equipped standardly with the interface adapter for SkyAir series. An option is unnecessary.
FLOOR STANDING TYPE ( 3 Phase ) It is recommended that the volume of outdoor air introduced through the kit is limited to 10% of Installation box for adaptor PCB(KRP1H98A) is necessary.
6 14
the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the
operating sound and may also influence temperature sensing.
71 100 125 140
Indoor unit FVA71AMVM FVA100AMVM FVA125AMVM FVA140AMVM
Model
Name
Round flow type: List of optional parts required to achieve different flow patterns
Outdoor unit RZF71CYM RZF100CYM RZF125CYM RZF140CYM For each flow pattern – all round, 4-way, 3-way, 2-way, branch duct connection – the compatibility of each independently installed option
Power supply Outdoor unit 3 Phase / 380V / 60Hz (shown in the column on the left) to accessory options (listed across the top of each table) is shown in the cells where the relevant row and column intersect.
Cooling Capacity 1,2 7.1 10.0 12.5 14.0 A circle (o) indicates compatibility, and a cross (x) indicates incompatibility. Any options not shown below are not suitable for independent or accessory installation.
Rated (Min. - Max.) kW (3.2-8.0) (5.0-11.2) (5.7-14.0) (6.2-15.5)
Btu/h
24,200
(10,900-27,300)
34,100
(17,100-38,200)
42,700
(19,500-47,800)
47,800
(21,200-52,900) All round flow 4-way flow
Power consumption Cooling kW 2.51 3.48 4.48 5.71 Optional accessory parts Fresh air intake kit Fresh air intake kit Insulation kit High-efficiency Ultra long-life
Designer panel Auto grille panel Panel spacer1
Independently installable optional parts (Chamber type) 1 , 2 (Direct installation type) for high humidity filter unit2 filter unit2
COP W/W 2.83 2.87 2.79 2.45
CSPF Wh/Wh 4.46 4.19 4.67 4.18 Panel/grille related Designer panel x o o o x x x
Indoor unit Colour Fresh white
Auto grille panel x o o o x x x
Airflow rate m3/min 18 / 16 / 14 28 / 25 / 22 28 / 26 / 24 30 / 28 / 26
Panel spacer 1
o o o o x o o
(H / M / L) cfm 635 / 565 / 494 988 / 883 / 777 988 / 918 / 847 1,059 / 988 / 918
Auxillary function related Fresh air intake kit (Chamber type)1,2 o o o x x o o
Sound pressure level 3 (H / M / L) dB(A) 43 / 41 / 38 50 / 47 / 44 51 / 48 / 46 53 / 51 / 48
Fresh air intake kit (Direct installation type) o o o x o o o
Dimensions (HXWXD) mm 1,850X600X270 1,850X600X350
Insulation kit for high humidity x x x x o x x
Machine weight kg 42 50
Filter related High-efficiency filter unit2 x x o o o x x
Certified Operation range °CWB 14 to 25
Ultra long-life filter unit2 x x o o o x x
Outdoor
unit
Colour
Coil Type
Ivory white
Micro channel
3-way flow 2-way flow 5
Compressor Type Hermetically sealed swing type Optional accessory parts Fresh air intake kit Fresh air intake kit Insulation kit High-efficiency Ultra long-life
Designer panel Auto grille panel Panel spacer1,3
Independently installable optional parts (Chamber type)1,2 (Direct installation type) for high humidity filter unit2 filter unit2
Motor output kW 1.60 2.40
Refrigerant charge (R32) kg 1.3(Charged for 30 m) 1.9(Charged for 30 m) Panel/grille related Auto grille panel x o o x x x
Sound Cooling dB(A) 48 49 52 54
Panel spacer1,3 x x x
pressure level 3
Night quiet mode dB(A) 44 45 Auxillary function related Fresh air intake kit (Chamber type)1,2 x o x x x o
Dimensions (HXWXD) mm 695X930X350 990X940X320
Fresh air intake kit (Direct installation type) x o x o x o
Machine weight kg 48 64
Insulation kit for high humidity x x x x o x x
Certified Operation range °CDB 21 to 46 Filter related Ultra long-life filter unit2 x x o o x x
Piping Liquid (Flare) mm 9.5
connections Gas (Flare) mm 15.9 Branch duct connection
Drain Indoor unit mm VP20 (I.D. 20XO.D. 26) Optional accessory parts Fresh air intake kit Fresh air intake kit Insulation kit High-efficiency Ultra long-life
Designer panel Auto grille panel Panel spacer1
mm 18.0 (Hole) 26.0 (Hole) Independently installable optional parts (Chamber type)1,2 (Direct installation type) for high humidity filter unit2 filter unit2
Outdoor unit
Max. interunit piping length m 50 (Equivalent length 70) Branch duct chamber 1 1-way branch / unit 3-way flow o o o o o 4
x x o
Max. installation level difference m 30
(Round duct type) 2-way branch / unit 2-way flow x o x o o 4
x x o
Heat insulation Both liquid and gas piping 1-way branch / unit 2-way flow x o x o o 4
x x o
Note : 1. In some cases, depending on how the unit is embedded in the ceiling, use of branch ducts and fresh air intake kits may not be possible. Before starting installation work make sure to check whether or not
1
Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal). joint installation is possible. In particular, ensure that the lower fixing position caused by the addition of panel spacers is acceptable.
2
Capacities are net, including a deduction for cooling for indoor fan motor heat. When branch ducts are used, circulation airflow is not available.
3
The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection. 2. When two different types of optional chambers are used together, a fresh air intake kit must be installed in the upper position.
3. It is not possible to use panel spacers in a 2-way flow installation. (△)
4. It is not possible to install a branch duct on the same side to which a fresh air intake kit (direct mount) is installed.
5. When 3-way or 2-way flow is selected, circulation airflow is not available.
51 52
OPTIONS
Outdoor unit
14 Adaptor box mounting plate KKSAP50A56 ----------
15 Remote sensor (for indoor temperature) KRCS01-4B / BRCS01A-4
16 Electrical box with earth terminal (3 blocks) KJB311AA Kit name
17 Electrical box with earth terminal (2 blocks) KJB212AA No. Name of option 1 Phase RZF50/60/71CVM RZF100CVM RZF125/140CVM
3 Phase ---------- RZF71/100CYM RZF125/140CYM
Note:
1
Wiring for wired remote controller should be obtained locally. 1 Central drain plug KKP014A4 KKP937A4 KKPJ5G280
2
The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. ---------- KKTP5B112
3 2 Fixture for preventing overturning ----------
Installation box for adaptor PCB (KRP1D93A) is necessary.
3 Wire fixture for preventing overturning ---------- ---------- K-KYZP15C
4 Demand adaptor ---------- KRP58M51 KRP58M51+EKMKSA1
Overvoltage PCB 1 Phase BRV2BPSF BRV2BPSS BRV2BPL
5
3 Phase ---------- BRV2BPSS+BRV2BPSS
53 54
DIMENSIONS (Unit: mm)
CEILING MOUNTED CASSETTE TYPE / Standard panel with Sensing CEILING MOUNTED CASSETTE TYPE / Standard panel with Sensing
[FCF50-71CVM] [FCF100-140CVM]
20 20 20 20 20 20 20 20
4 - M4 6 6 4 - M4 4 - M4
B Connection position 4 - M4 6 6
950 Note) 3 Prepared hole Prepared hole of branch duct Prepared hole B
160 950 Note) 3 Prepared hole
8 860~910 (celing opening spec)(Note 4) 81 2x100=200 85 160 Connection position
D
300 124 (Round shape type) 8 860~910 (celing opening spec)(Note 4) 81 2x100=200 85
D
25 25 or less 710 (suspention position) 109 124 300 167 of branch duct
Pipe connection 25 25 or less 710 (suspention position) 93 67 160 (Round shape type)
95
136
36 136
Pipe connection
94
94
side 420 C/L 16 - M4 420 95 C/L
E
Connection position side 10 16 - M4
E
10 Prepared hole Connection position 29
of branch duct Prepared hole
36
36
of branch duct
36
6
160
160
6 (Square-shaped type)
93 67
20 - M4 20 - M4
95
780 (suspention position)
167
780 (suspention position)
Prepared hole
950
Prepared hole
950
29
Arrow view D Arrow view E
110
95
124
11 122 11
124
7
160
80 2x100=200 80
7
80 2x100=200 80
15 15 20 20 157
350 Connection position Connection position
25
Drain connection 4 - M4 5 Drain connection 15 350
25
6 of branch duct 15 20 20 of branch duct
157
350
4 - M4
122
350
side Prepared hole C C/L side 5 C C/L (Square-shaped type)
Prepared hole Arrow view B (Square-shaped type) 4 - M4 6 4 - M4
Prepared hole Prepared hole Arrow view B
213
10 25
213
94
94
136
9
136
of branch duct of branch duct ø10
ø10
36
90
(Kn 0
36
(Round shape type)
(Kno 0 (Round shape type)
90
F ock
36
36
F ck h ho
Fresh air kit (direct type) ole) le)
Fresh air kit (direct type) 90
Arrow view F Arrow view G Connection position 90 420 196
183 Connection position
420
G
Arrow view F Arrow view G
G
Arrow view C Arrow view C
of branch duct
Adjustable (0~675)
Prepared hole (Square-shaped type) BYCQ125EEF Sensing panel (Fresh white) 16 - M4 (Square-shaped type) BYCQ125EEF Sensing panel (Fresh white)
3 (Note 2) Prepared hole (Note 2) BYCQ125EEK
BYCQ125EEK Sensing panel (Black) Connection position 3 Sensing panel (Black)
55 840 55 Connection position 55 840 55 20 - M4 55 840 55
of branch duct 55 840 55 27 - M4
Prepared hole
850
850
80 2x100=200 80 64 Hanger 160
color are different. 160 50 color are different.
167
124
95
124 50
110
124
167
It can be chosen one of above 2 types depend on It can be chosen one of above 2 types depend on
95
93
95
110
124
105
105
29
60
95
60
160
298
256
288
29
175
160
246
150
175
160
10
165
160
150
160
125
10
67
165
125
42
1 Liquid pipe connection 1 Liquid pipe connection
42
(Required space)
2 Gas pipe connection C/L 35 or less
C/L 35 or less 20 256 2 Gas pipe connection
(Required space)
256
50
40
20
1500 or more
157
(Ceiling side-
hanger fixture height)
hanger fixture height)
(Note 4)
1500 or more
50
(Ceiling side-
40
130
Suspention bolt Connection position 280 4 1 2 Connection position 35 or less (Round shape type) 330 of branch duct A
130
330 of branch duct A (Note 4)
4 - M8~M10 of branch duct
(Round shape type) (Note 4) connection (Round shape type) connection
(Round shape type)
5 Connection wiring / 5 Connection wiring /
Remote control wiring connection Remote control wiring connection
6 Air outlet 6 Air outlet
7 Suction grille 7 Suction grille
8 Corner decoration cover 8 Corner decoration cover
9 Sensor 9 Sensor
10 Drain hose (accessory) 10 Drain hose (accessory)
11 Drain hose connection port 11 Drain hose connection port
Note: Note:
1.Sticking location for Manufacture's label 1.Sticking location for Manufacture's label
Manufacture's label for Indoor unit : Suction grille inner side's electric components box's lid surface. INSTALLATION SPACE Manufacture's label for Indoor unit : Suction grille inner side's electric components box's lid surface. INSTALLATION SPACE
a a
Manufacture's label for Decoration panel : Decoration panel's corner decoration cover inner surface. ORE
Manufacture's label for Decoration panel : Decoration panel's corner decoration cover inner surface.
RM MORE
mm O m OR
200 200m
2.In case of having option part built-in, please refer outside drawing of option part. 2.In case of having option part built-in, please refer outside drawing of option part.
Fresh air intake kit..........................................inspection hole Need a a
Fresh air intake kit..........................................inspection hole Need a a
Natural evaporate type humidifier...................inspection hole Need Natural evaporate type humidifier...................inspection hole Need
Air purifier unit................................................ inspection hole No Need 200
mm
Air purifier unit.................................................inspection hole No Need 200
mm
High efficiency filter unit..................................inspection hole No Need OR
MO High efficiency filter unit.............................inspection hole No Need OR
MO
RE a RE a
Branch duct chamber......................................inspection hole No Need Branch duct chamber......................................inspection hole No Need
(both angle duct • circle duct) (both angle duct • circle duct)
- The necessary space is 500 mm or more when the air-outlet is - The necessary space is 500 mm or more when the air-outlet is
3.In case of using wireless remote controller. this position will be a signal receiver. 3.In case of using wireless remote controller. this position will be a signal receiver.
blocked with the accessory. blocked with the accessory.
Refer to the drawing of wireless remote controller in detail. Refer to the drawing of wireless remote controller in detail.
Moreover when the corner areas are blocked (both right and Moreover when the corner areas are blocked (both right and
4.Though the installation is acceptable up to maximum of 910 mm square ceiling opening, keep the left of the blocked air outlet), the necessary space is 200 mm 4.Though the installation is acceptable up to maximum of 910 mm square ceiling opening, keep the left of the blocked air outlet), the necessary space is 200 mm
clearance of 35mm or less between the indoor unit and the ceiling opening so that the panel overlap or more. clearance of 35mm or less between the indoor unit and the ceiling opening so that the panel overlap or more.
allowance can be ensured. - When the air-outlet is close to the wall surface (both sides of allowance can be ensured. - When the air-outlet is close to the wall surface (both sides of
the air-outlet), the recommended space is 2000 mm or more. the air-outlet), the recommended space is 2000 mm or more.
5.When the temperature and humidity in the ceiling exceed 30ºC and 80% RH or the fresh air is 5.When the temperature and humidity in the ceiling exceed 30ºC and 80% RH or the fresh air is
inducted into the ceiling or the unit continues 24 hour operation, an additional insulation (thickness inducted into the ceiling or the unit continues 24 hour operation, an additional insulation (thickness
10mm or more of glasswool or polyethylene form) is required. 10mm or more of glasswool or polyethylene form) is required.
6.Please do not place the thing been damp and troubled under an indoor unit. when the case where 6.Please do not place the thing been damp and troubled under an indoor unit. when the case where
humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall.
7.If put vent hole, lighting, equipment near the air flow disturb equipment, ceiling surface may get dirty, 7.If put vent hole, lighting, equipment near the air flow disturb equipment, ceiling surface may get dirty,
therefore shall install following to diagram as below. therefore shall install following to diagram as below.
8. For fixing position of human detection and temp sensor will be follow to diagram instruction (can not change position). 8. For fixing position of human detection and temp sensor will be follow to diagram instruction (can not change position).
Model FCF50-71CVM Model FCF100-140CVM
a 1500-5000 a 1500-7000
Valid Valid
Circulation b 5000 or more Circulation b 7000 or more
air flow a 1500 or more air flow a 1500 or more
Invalid Invalid
b 4000 or more b 4000 or more
( 1)Lighting is targeted for exposed type (inverse fuji-shape etc.), for embedded type (type that not expose to ceiling surface), there is no restriction. ( 1)Lighting is targeted for exposed type (inverse fuji-shape etc.), for embedded type (type that not expose to ceiling surface), there is no restriction.
55 56
DIMENSIONS (Unit: mm)
CEILING MOUNTED CASSETTE TYPE / Standard panel CEILING MOUNTED CASSETTE TYPE / Designer panel
[FCF50-71CVM] [FCF50-71CVM]
20 20 20 20
4 - M4 6 6 4 - M4 B
950 Note) 3 Prepared hole Prepared hole 160 Connection position
8 860~910 (celing opening spec)(Note 4) 124 81 2x100=200 85 20 20 20 20
D
300 of branch duct
25 25 or less 710 (suspention position) 109 124 (Round shape type) 950 Note) 3 4 - M4 6 6 4 - M4
Pipe connection 95 B
36 94
420 C/L
94
side 16 - M4 8 Prepared hole Prepared hole 202 81 2X100=200 85 Connection position
9
E
Connection position Prepared hole 860~910 (celing opening spec)(Note 4)
D
of branch duct 300 124 124 of branch duct
Pipe connection
36
25 25 or less 710 (suspention position) 109
6 (Round shape type)
160
(Square-shaped type) side 95 C/L
94
94
420
E
6 Connection position Prepared hole
36
202
36
110
95
124
10 122 (Square-shaped type)
124
80 2x100=200 80
950
15 15 Connection position 20 - M4
Drain connection 20 20 350 Prepared hole
of branch duct
25
7
350
122
side 4 - M4 (Square-shaped type)
110
C/L
95
Prepared hole C
124
Prepared hole 15 15 20 20 10
124
80 2X100=200 80
Arrow view B 122 Connection position
Drain connection 4 - M4 5 6 4 - M4 350
213
10 25 of branch duct
25
side Prepared hole
Prepared hole
122
350
Connection position
94
94
36
(Round shape type)
(Kn 0
90
36
94
94
213
F Fresh air kit (direct type) ock
ho le) Arrow view A Connection position
Connection position of branch duct
36
90
36
Arrow view F Arrow view G 183 (Round shape type) O10
90
420
F (Kno 0
G
Fresh air kit (direct type) ck h
connection position ole)
Arrow view C Arrow view F Arrow view G 90
420 225
G
Arrow view C
Connection position
of branch duct
Adjustable (0~675)
Adjustable (0~675)
340 of branch duct Prepared hole
81 2x100=200 85 Note: 16 - M4 (Square-shaped type)(Note 2)
(Square-shaped type) 64 Hanger
850
124 50
110
124
105
110
Prepared hole
95
60
5 It can be chosen one of above 2 types depend on 340 (Square-shaped type) 81 2X100=200 85
80 2X100=200 80 64 Hanger Decoration panel
905
your specify.
256
124
124
110
124 50
246
BYCQ125EAPF
175
Designer panel
165
160
160
95
124
150
105
10
110
125
95
60
42
5
1 Liquid pipe connection
C/L 35 or less 256
(Required space)
20 2 Gas pipe connection
298
Hanger fixture height)
246
50
1500 or more
(Ceiling side-
40
(Note 4)
217
122
207
52
1 Liquid pipe connection
192
122
202
167
202
Humidifier drain pipe
42
Suspention bolt Connection position
4 - M8~M10 of branch duct
350 connection position 350 3 Drain pipe connection
280 4 1 2 Connection position 2 Gas pipe connection
(Round shape type) 35 or less 4 Power-source wiring and a unit wiring
130
330 of branch duct A 35 or less 256
C/L 3 Drain pipe connection
(Required space)
(Round shape type) (Note 4) 20
97
connection
45
122 (Note 4) 122
4
1500 or more
Humidifier drain pipe 35 or less Power-source wiring and a unit wiring
Hanger fixture
Suspention bolt Connection position 350 350
5 Connection wiring / 4 1 2
Ceiling side-
4 - M8~M10 of branch duct connection position (Note 4)
(Round shape type)
280
Connection position connection
Remote control wiring connection A
172
330
height)
of branch duct
6 Air outlet (Round shape type) 5 Connection wiring /
7 Remote control wiring connection
Suction grille
6 Air outlet
8 Corner decoration cover
7 Suction grille
9 Drain hose (accessory)
8 Corner decoration cover
10 Drain hose connection port
9 Drain hose(accessory)
10 Drain hose connection port
CEILING MOUNTED CASSETTE TYPE / Standard panel CEILING MOUNTED CASSETTE TYPE / Designer panel
[FCF100-140CVM] [FCF100-140CVM]
20 20 20 20
6 6 4 - M4
4 - M4 Prepared hole B
Note) 3 Prepared hole 20 20 20 20
950 160 Connection position
8 300 860~910 (celing opening spec)(Note 4) 167 81 2X100=200 85 4 - M4
D
136
D
29 300
E
136
136
(Round shape type)
36
of branch duct
36
side 95 C/L
160
E
860-910 (celing opening spec)(Note 4)
6 9 Connection position
93 67
20 - M4 Prepared hole
95
167
36
of branch duct
202
36
950
Arrow view D
(Square-shaped type)
29
93 67
950
10 20 - M4
80 2X100=200 80
7 15 15
160
20 20
95
167
157 Connection position 7 Prepared hole
5
29
25
350
157
160
15
80 2X100=200 80
C C/L (Square-shaped type) 15 20 20 157
Drain connection 5 Connection position
Arrow view B 4 - M4 4 - M4 350 of branch duct
25
10 side 6
350
25
136
136
Prepared hole
157
213
136
136
213
36
36
36
connection position
36
90 (Round shape type)
90
Arrow view F Arrow view G O10
420 196 F Fresh air kit (direct type) (Kno 0
connection position ck h
ole)
G
G
Arrow view C
Connection position
Adjustable (0~675)
Adjustable (0~675)
340 Prepared hole 16 - M4
(Square-shaped type) 64 81 2X100=200 85 Note: of branch duct
80 2X100=200 80 Hanger Prepared hole
850
(Square-shaped type)(Note 2)
167
5
105
29
Decoration panel
167
your specify. 905 160
95
298
160 50
167
288
175
95
29
160
160
93
150
10
105
29
60
165
125
67
42
160
(Required space)
340
35 or less 2
20 C/L 256 Gas pipe connection
288
50
29
40
1
Hanger fixture
157
52
(Note 4)
202
202
1500 or more
157
192
Ceiling side-
67
42
3 Drain pipe connection
167
350
207
Humidifier drain pipe 350
Suspention bolt Connection position 280 connection position 35 or less 2 Gas pipe connection
4 Power-source wiring and a unit wiring
height)
(Required space)
of branch duct
97
connection
45
(Note 4) 157
(Round shape type) 4 Power-source wiring and a unit wiring
Hanger fixture
350 Humidifier drain pipe
1500 or more
Suspention bolt Connection position 350 35 or less
Ceiling side-
5 Connection wiring / 4 - M8~M10 of branch duct 280 4 1 2 connection position (Note 4)
330 connection
Remote control wiring connection (Round shape type) Connection position
height)
A
of branch duct
5 Connection wiring /
172
6 Air outlet (Round shape type)
Remote control wiring connection
7 Suction grille
6 Air outlet
8 Corner decoration cover
7 Suction grille
9 Drain hose(accessory)
8 Corner decoration cover
10 Drain hose connection port
9 Drain hose(accessory)
10 Drain hose connection port
57 58
DIMENSIONS (Unit: mm)
CEILING MOUNTED CASSETTE TYPE / Auto grille panel DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE
[FCF50-71CVM] [FBA50-71BVMA]
Inspection hatch 2
30-φ4.7hole 134 630 10 450 or more CASE1) Control box
(All around) (Hanging bolt position) Inspection hatch 1
( Drain
300 or more
pan removal
and part exchange. )
(450x450)
Inspection hatch 3
200 or less
8
20 20 20 20 8 ※When can work enters (SAME AS THE INDOOR
UNIT SIZE +300 OR MORE)
6 6 4 - M4 the space under the unit,
950 Note) 3 4 - M4 B inspection hatch 2 is Control box
Prepared hole Prepared hole 215 81 2X100=200 85 Connection position
860~910 (celing opening spec)(Note 4) unnecessary.
300 124
D
124 of branch duct Control box
Pipe connection 25 25 or less 710 (suspention position) 109 9 Inspection hatch Fig.A
C/L (Round shape type) Ceiling
1300 or more
side
94
94
420 95 16 - M4
11x65=715
1038(Hanging bolt position)
10
E
Connection position CASE 2),3)
1000 or more
Prepared hole Control box
of branch duct
835
6
36
215
Inspection hatch1
36
(Square-shaped type) (450x450)
or less
20 or more
20 - M4 Air Air inlet
950
200
Prepared hole outlet Control box
Arrow view E
13x65=845
800 or more 800 or more
110
95
124
1000
11 36-φ4.7hole Inspection hatch 2
500
15 15
124
80 2X100=200 80
20 20 122 View B-1 View B-2
Inspection hatch
500
Drain connection 4 - M4 5 Connection position B
6 4 - M4 350 (All around) (SAME AS THE INDOOR Unit base
25
side Prepared hole of branch duct Ceiling UNIT SIZE OR MORE)
Prepared hole
122
350
C C/L (Square-shaped type)
Arrow view B
10 25 Air outlet Air inlet
94
94
213
9 Connection position
Arrow view A Suspention
200 or less
36 Fig. A-1 Inspection hatch 2※
36
53
(Service space)
90
65
69
(Kno 0 (All around)
450 or more
F Fresh air kit (direct type) ck h
connection position ole)
Arrow view F Arrow view G 90 13
176
100
194
420 238
Notes:
G
Connection position Arrow view C 1
Locations of Manufacturer's Label:Surface of a control box
Adjustable (0~675)
138
Prepared hole 3 (Square-shaped type)(Note 2) maintenance space
Connection position 792
55 55 of branch duct 55 840 55 20 - M4 OPTIONAL WIRELESS REMOTE CONTROLLER the suction side. (Select Duct Collection Efficiency
840 Control Box
Prepared hole 43 Inspection hatch 1 815
340 (Square-shaped type) 81 2X100=200 85 BRC16A2
450 or more 800 or more maintenance space <Gravimetric Method>50% or more.)
80 2X100=200 80 64 Hanger View If the temperature and humidity in the ceiling is likely to
905
3
124
124
(Service space)
110
124 50
105
124
110
60
95
STOP
5
12
AUTO GRILLE
UP
3x50=150
(643 or less)
DOWN覺
2 6 5 300 or less 499 wool or polyethylene that has thickness of 10mm or more.
311
1 3
2x50=100
246
133
BRC16A2
207 Adjustable
65
230
220
215
215
205
EMERGENCY
180
4
Do not put things that should not get wet under the indoor unit.
42
LIFTING/LOWERING
850 or less
LIFTING/LOWERING STAGE
Dews may drop when humidity reaches over 80%, a drain
C/L 35 or less 256 gets stuck or air filters are not clean.
(Required space)
20
105
(Note 4)
40
122
Hanger fixture
AUTO GRILLE
122 Space for Service Works
245
5
222
Air Air inlet
Ceiling side-
1500 or more
183
Suspention bolt Connection position 350 Humidifier drain pipe 35 or less
208
136
226
123
4 1 2 350 18.5 outlet (Note.2)
4 - M8~M10 of branch duct connection position (Note 4)
280 Provide service spaces for service work such as check and
height)
(Round shape type) Connection position
185
330 A AUTO GRILLE RECEIVER WIRELESS REMOTE CONTROLLER
6x150=900 maintenance of the control box and drain pump by one of the
60
of branch duct 91
38
4 7 952 following ways.
300 or more
(A case without
(Round shape type) 179 50
2500 or more
11
(Note.5)
Decoration panel 977
the ceiling)
300 1)Inspection hatch 1and 2(450x450) (Fig.A-1) and a space of
BYCQ125EASF Auto grille panel
Drain pan maintenance 800
18-8x12 oblong hole (From the Air inlet) 300mm or more under the unit. (Fig.A)
check hole (All around) Note:Inspection hatch 2 is not needed when there is a space for
1 Liquid pipe connection 6 Air outlet Ceiling Floor surface service work under the unit.
2 Gas pipe connection 7 Suction grille 2)Inspection hatch 1(450x450) on the control box side, and
Inspection hatch 2 under the unit. (View B-1)
3 Drain pipe connection 8 Corner decoration cover 1 Liquid pipe connection 6 Remote control wiring connection 11 Socket(For maintenance) 3)Inspection hatch 3 under the unit and control box. (View B-2)
4 Power-source wiring and a unit wiring 9 Auto grille receiver 2 Gas pipe connection 7 Power supply wiring connection 12 Drain hose(Accessory)
connection 10 Drain hose(accessory) Provide enough space for maintenance and mount the drain
3 Drain pipe connection 8 Air discharge flange 13 Drain hose connection(Accessory) pan and control box.
5 Connection wiring / 11 Drain hose connection port 4 Earth terminal(terminal in Control box) 9 Air suction flange Check the drawing of optional accessories when mounting
Remote control wiring connection 5 Control box(Inside) 10 Hanger optional accessories such as filter chamber and humidifier.
CEILING MOUNTED CASSETTE TYPE / Auto grille panel DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE
[FCF100-140CVM] [FBA100-140BVMA]
44-φ4.7hole 134 630 10
(All around) (Hanging bolt position) 50-φ4.7hole
20 20 20 20
(All around) CASE1) Control box
8
950 Note) 3 4 - M4 6 6 4 - M4 8
Prepared hole B
9
300 or more
Prepared hole Inspection hatch 1
215 81 2X100=200 85 Connection position (450x450) Inspection hatch 3
860~910 (celing opening spec)(Note 4) 167
D
300
200 or less
of branch duct Inspection hatch 2
Pipe connection or less 710 (suspention position) 93 67 160 450 or more (SAME AS THE INDOOR
25 25
136
136
Connection position
Prepared hole Inspection hatch
215
Fig.A Ceiling
36
Control box
(Square-shaped type)
1700 or more
18x65=1170
※When can work enters
860~910 (celing opening spec)(Note 4)
93 67
20x65=1300
1400 or more
1235
Prepared hole inspection hatch 2 is Inspection hatch1
200 or less
Arrow view E
780 (suspention position)
Arrow view D
unnecessary.
1400
(450x450)
29
20 or more
11
160
15
80 2X100=200 80
15 20 20 157
Drain connection 5 Connection position Control box
4 - M4 4 - M4 350
25
500
outlet View B-1
10 Ceiling (SAME AS THE INDOOR
25
136
136
213
500
of branch duct Air outlet
36
36
Unit base
90
200 or less
420 Fig. A-1
(Service space)
G
450 or more
53
65
69
Arrow view C
Adjustable (0~675)
176
100
194
Prepared hole (Square-shaped type)(Note 2) Notes:
13
55 840 55 Connection position 3 27 - M4
1
Locations of Manufacturer's Label:Surface of a control box
of branch duct 55 840 55 Control Box 26
340 Prepared hole OPTIONAL WIRELESS REMOTE CONTROLLER maintenance space 7x156=1092
2
Make sure to mount the air filter inside the air passage on
138
(Square-shaped type) 81 2X100=200 85
80 2X100=200 80 64 Hanger
43 Drain pan the suction side. (Select Duct Collection Efficiency
160 1192
167
905
160 50 BRC16A2
95
1215
105
5
29
3
Inspection hatch 1
800 or more View
450 or more exceed 30℃ and RH80%, strengthen heat insulation by
160
STOP
AUTO GRILLE
鎮詩 賻
353
(Service space)
UP
DOWN覺
65
230
215
215
205
67
12
42
180
220
3x50=150
133
300 or less
EMERGENCY
(643 or less) 699
2x50=100
LIFTING/LOWERING
2
207 Adjustable
1 6 5 Do not put things that should not get wet under the indoor unit.
850 or less
4
35 or less 256
3
20 C/L Dews may drop when humidity reaches over 80%, a drain
(Required space)
LIFTING/LOWERING STAGE
105
157
40
(Note 4)
Hanger fixture
157
gets stuck or air filters are not clean.
Ceiling side-
350
1500 or more
Suspention bolt Connection position Humidifier drain pipe 350 35 or less AUTO GRILLE
226
208
245
Air inlet
60
222
height)
330 18.5
183
123
185
300 or more
4 7
(A case without
2500 or more
100 100 6x150=900 100 100 following ways.
50
(Note.5)
Decoration panel 11 179 (All around)
the ceiling)
300 1352
BYCQ125EASF Auto grille panel 1377
1)Inspection hatch 1and 2(450x450) (Fig.A-1) and a space of
Drain pan maintenance 800
check hole 300mm or more under the unit. (Fig.A)
(From the Air inlet)
6 Note:Inspection hatch 2 is not needed when there is a space for
1 Liquid pipe connection Air outlet
Ceiling Floor surface service work under the unit.
2 Gas pipe connection 7 Suction grille 2)Inspection hatch 1(450x450) on the control box side, and
3 Drain pipe connection 8 Corner decoration cover 1 Liquid pipe connection 6 Remote control wiring connection 11 Socket(For maintenance) Inspection hatch 2 under the unit. (View B-1)
4 Power-source wiring and a unit wiring 9 Auto grille receiver 2 Gas pipe connection 7 Power supply wiring connection 12 Drain hose(Accessory) 3)Inspection hatch 3 under the unit and control box. (View B-2)
connection 10 Drain hose(accessory) 3 8 13 Drain hose connection(Accessory)
Drain pipe connection Air discharge flange Provide enough space for maintenance and mount the drain
5 Connection wiring / 11 Drain hose connection port 4 Earth terminal(terminal in Control box) 9 Air suction flange pan and control box.
Remote control wiring connection Check the drawing of optional accessories when mounting
5 Control box(Inside) 10 Hanger optional accessories such as filter chamber and humidifier.
59 60
DIMENSIONS (Unit: mm)
210
[FHA50/60BVMA] 156
Connection position of fresh air intake kit
[FHA100-140BVMA]
105 φ100(Knock out hole) 210
18 17 20 16 120
102 9 156 Connection position of fresh air intake kit
131 57 90
105
35
18 17 20 16 120 φ100(Knock out hole)
102 9
157 63
90
92
131 57
175
35
87
163
30
100
90
189
115
210
195
157 63
92
87
30
163
189
100
90
210
175
115
195
40
63
bolt pitch)
(Hanging
116 51 60 134 59
12
260
40
10 63
bolt pitch)
(Hanging
Position slit hole for taking out in pipe back 116 51 60 134 59
260
10 12
(View from the front)
(Required space)
Position slit hole for taking out in pipe back
8
(Required space)
(View from the front)
(Required space)
220 8
920 103 220
(Required space)
690 (Hanging bolt pitch) 19 15 103
1550 19 15
5
690 (Hanging bolt pitch)
Hanging bolt
5
Hanging bolt
5
4 11
175
4-M8~M10 1 5
4-M8~M10 1 4 5 11
175
5
197
91
131
197
91
131
235
197
197
235
Position : Hole of wall for taking out in pipe back
From the floor side 2500 or more
(Required space)
300 or more
(Required space)
57
300 or more
13 6
30 or more 960 30 or more φ 45 57 30 or more 1590 30 or more
(Service space) (Service space) (Service (Service φ45
Obstacle space) space)
The Front The Front
Floor side Brand name plate 1 Air discharge grille 1 Air discharge grille
Obstacle Brand name plate
(Note.2) 2 Air suction grille 2 Air suction grille
Floor side (Note.2)
3 Air filter 3 Air filter
4 Gas pipe connection 4 Gas pipe connection
Drain piping connection VP20 5 Liquid pipe connection
6 5 Liquid pipe connection Drain piping connection VP20
(For left pipe) 6
6 Drain pipe connection (For left pipe) 6 Drain pipe connection
7 Earth terminal (inside the control box) (M4) 7 Earth terminal (inside the control box) (M4)
8 Hanger 8 Hanger
9 Rear pipe penetration cover 9 Rear pipe penetration cover
268
268
268
221
214
268
221
214
10 Top panel penetration cover 10 Top panel penetration cover
11 Right side pipe connection 11 Right side pipe connection
76 83 12 Left back drain pipe connection 76 83 12 Left back drain pipe connection
3 2 7 5 105 4 3 2 7 5 105 4
13 Left side drain pipe connection 13 Left side drain pipe connection
156 156
Notes: 14 Right side drain pipe connection 14 Right side drain pipe connection
1
Location of unit's Name Plate: Bottom of fan housing inside the suction grille. 15 Hole of wall for taking out in pipe back Notes: 15 Hole of wall for taking out in pipe back
2
In case of using wireless remote controller, this position will be a signal receiver. 16 Upward drain pipe connection 1
Location of unit's Name Plate: Bottom of fan housing inside the suction grille. 16 Upward drain pipe connection
Refer to the drawing of wireless remote controller in detail. 17 Upward gas pipe connection 2
In case of using wireless remote controller, this position will be a signal receiver. 17 Upward gas pipe connection
3
Please do not place the thing been damp and troubled under an indoor unit. 18 Upward liquid pipe connection Refer to the drawing of wireless remote controller in detail. 18 Upward liquid pipe connection
When the case where humidity is 80% or more, and the drain outlet are choked up 19 Power supply wiring and a unit wiring back connection 3 Please do not place the thing been damp and troubled under an indoor unit. 19 Power supply wiring and a unit wiring back connection
and the air filter are dirty, dew may fall. 20 Power supply wiring and a unit wiring upper connection When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 20 Power supply wiring and a unit wiring upper connection
[FHA71BVMA] [FAA71BVMA]
210 Connection position of fresh air intake kit
156
105 φ100(Knock out hole)
18 17 20 16 120 Piping direction
102 9
131 57 90
(Required space)
35
157 63
92
175
87
30
163
189
100
210
50 or more
115
90
Approx.400
195
240
40
63 238
bolt pitch)
(Hanging
116 51 60 134 59
260
12
10 7
Position slit hole for taking out in pipe back
(Required space)
(Required space)
(Required space)
220
103 Dimensions
30 or more
1230 19 15 for full open
290
690 (Hanging bolt pitch) front panel 8
5
Hanging bolt 4 5 11
175
5
4-M8~M10 1
91
131
3
197
197
Position : Hole of wall for taking out in pipe back 9 2 1 Piping direction Name plate Note)2 Piping direction 120 or less
235
57
6
For height installation
300 or more
14.5
Obstacle Brand name plate φ80 hole
2 Air suction grille
Floor side (Note.2)
3 Air filter Piping and
4 Gas pipe connection Outside line
Wiring intake
Drain piping connection VP20 5 Liquid pipe connection φ80 hole
6 6 Drain pipe connection
(For left pipe)
7 Earth terminal (inside the control box) (M4)
8 Hanger
105
9 Rear pipe penetration cover
268
44
268
221
214
44
Approx.345 98 1 Front panel
76 83 12 Left back drain pipe connection 60 5
3 2 7 5 105 4 2 Front grill
13 Left side drain pipe connection 4 Approx.390
156 14 Right side drain pipe connection Mounting location 3 Air outlet
Approx.475 4 Gas piping
Notes: 15 Hole of wall for taking out in pipe back
1 16 Upward drain pipe connection Notes: 5 Liquid piping
Location of unit's Name Plate: Bottom of fan housing inside the suction grille.
2 17 Upward gas pipe connection 1
Location of unit's of Name Plate:Right side surface of casing 6 Drain hose
In case of using wireless remote controller, this position will be a signal receiver.
Refer to the drawing of wireless remote controller in detail. 18 Upward liquid pipe connection 2
In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail. 7 Earth terminal
3 Please do not place the thing been damp and troubled under an indoor unit. 19 Power supply wiring and a unit wiring back connection 3
Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, 8 Right side piping connection hole
When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 20 Power supply wiring and a unit wiring upper connection and the drain outlet are choked up and the air filter are dirty, dew may fall. 9 Left side piping connection hole
61 62
DIMENSIONS (Unit: mm)
[FAA100BVMA] [FVA100-140AMVM]
260
Suction grille 4 holes for anchor bolts 130 215
Ø14 126
stopper
Piping direction
7
79
(Required space)
229
202
Approx.440
50 or more
0.7
130
242
240 DETAIL A
Fixture for preventing
Both sides identical VIEW B
7 overturning
Accessory 330
30
600
18
68 350
Pull-out
(Required space)
direction of Required
340
installation
Dimensions for air filter
30 or more
314
space
full open ·50
front panel · o
·2-7· x ·15·mm
r mo
oblong holes
8 re
·50
·740· or more
3 mo
re
2500 or more 120 or less
677
(Requred space) (Requred space) in high spaces m
r
2 · o
00
79.5 1085 35.5 A ·15
14.5
1850
8
φ80 hole
Outside line 9 1 Air suction grille
Piping and ±46
2 Air filter
φ80 hole Wiring intake
3 Hole for piping
(70x90 mm oblong holes)
4 Hole for piping ( 80 slit hole)
44
6 5 Hole for piping ( 27 slit hole)
825
49
114
3 6 Piping hole (rear)
45
45
(80x130 oblong slit hole)
616
1 6
541
65 6 2 Front grill 10 7 Piping hole (bottom)
Approx.400 89 130 (126x130 oblong slit hole)
3 Air outlet B
50
50
5 Approx.460 8 Liquid pipe
95
4 Gas pipe 5
suction grille
Mounting location Approx.465 9 Gas pipe
100
4 5 Liquid pipe
95
Notes: 4 10 Drain pipe connection
1 6 Drain hose 130 200 190
100
Location of unit's of Name Plate:Right side surface of casing
75
223 260 184 184
Earth terminal
34
2
In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail. 7 190 266
Notes:
253
3
Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, 8 Right side pipe connection hole 266 322 The unit nameplate is located on the switch
Left side pipe connection hole 598 box cover, inside the suction grille.
and the drain outlet are choked up and the air filter are dirty, dew may fall. 9
7
149
144
130
0.7
342
326
300
DETAIL A
Both sides identical VIEW B Fixture for preventing
overturning
4-hole for anchor bolts
20
Earth terminal
7
Accessory 330 (M8 or M10)
30
270
68 Required
Pull-out installation
direction of
314
space
air filter ·50
· o
·2-7· x ·15·mm
r mo
oblong holes
re
·50
595
Dimension of air filter
2 · o
r mo
·740· or more
re
60
when pulled out
677
more
r
· o
00
105
A ·15
1850
8 144 20
Service port
112
2 Air filter
163
3 Hole for piping
269
272
Service port Gas stop vale
(70x90 mm oblong holes)
44
4 Hole for piping ( 80 slit hole)
49 5 Hole for piping ( 27 slit hole)
825
6
3 6 Piping hole (rear) Drain outlet
(80x130 oblong slit hole) 21
6
Position of fully opened
616
1 6
541
95
50
Drain outlet
5 8 Liquid pipe 299
suction grille
95
50 4
75
223 180
34
Notes: 479
110 253 186
The unit nameplate is located on the switch
186 242 509
598 box cover, inside the suction grille.
559
63 64
DIMENSIONS (Unit: mm)
Wireless type
15 930 46 350
Refrigerant
Piping side
Decoration
157
189
panel
Handle
695
24
Drain outlet
Liquid stop valve
(Ceiling opening)
Service port
83.5
120
106
72
Gas stop valve
• Receiver
detail
0.5
OUTDOOR UNIT // RZF125/140CVM / CYM 70 18 35 49
(Ceiling opening)
Note :
(Srevice space)
More than 90
Do not install more than 3
receivers in the vicinity of
(345∼355)
one another.
With 4 or more units, there
350
malfunction
55
37
38
30
91
160 620 160 Wired type • Remote controller dimensions
30 940 3 BRC1E63
Remote controller dimensions Upper case Lower case
Installation method
A Exposed cord Conduit
Staple B Embedded cord C Embedded cord (use switch box)
Top left 19 19
Top center
42
outlet
4 Operation
outlet
7 lamp
120
84
2 (Green)
40
6
1
84
84
990
7 5
40
5 6 Code outlet hole
120 19 28
5 Note)2 28
55
and
55
340
339
Specifications of cord
84
Note)
53
53
89 19
53
1. Remote controller cord and staple are not attached. They are field Type Vinyl cord with sheath or cable (insulated thickness: 1mm or more)
89
19 80 52 supplied parts.
7 6 142 Size 0.75~1.25 mm2
145 13 67 2.If the hole size is too large or the location is not proper, the hole
90 16 Total length 500 m
8 may come out from the remote controller.
16
68
3 Service port
5 4 Earth terminal
36
61 5 Refrigerant piping intake
262 6 Power supply wiring intake
416 7 Transmission wiring intake
595
8 Drain pipe connection
65 66
Installation service space for outdoor unit (Unit: mm)
1) When the overhead space is open 1) When the overhead space is open
1 2
1. For single unit installation 1. For single
When there is an 1 2
unit installation
obstruction only
on the inlet side 0 mo
re
50 ore 0 or
or
m 50
re
mo 0 2. For multiple units installation (more than two units)
or 10 ore
50 m 10
or 0
mo or
When there are obstructions on 1 2 re 10
0
mo or
both sides re
1 2
25
0o
rm
ore
10 10 re
0o
rm 0o mo mo
re
ore rm or or
re ore 00 0
25 mo 10 10 100
0o r 0
rm 0o
0o
rm 10 ore
ore 10 ore or
m
2) When there is an obstruction in the overhead space
1. For single unit installation
2. For multiple units installation An obstruction
ss ss
(more than two units) 10 o r le
in the overhead
0o
r le
0
mo or 5 00 space 50
1000 or more
When there are re 10
1000 or more
0
mo or 1 2
re
obstructions on
both sides 10
00
or
mo
re
re
20 mo
0o
rm 0 or
ore 30 re re
mo mo
0 or or
50 0
50
1000 or more
1. For single unit installation
1000 or more
10
0
mo or
re
When there is an obstruction on the inlet side
ss
r le
1000 or more
1 s 2 0o
r les 50 10
0o
or more
0
50 mo or
1000
re
25
An obstruction 0o
rm
in the overhead ore
An obstruction re
space ore in the overhead mo
o rm or
00 space 00
10 10
ore
rm 0
0o 10 ore
10 m
or
3 When there are obstructions on both
When there are obstructions on the inlet side and
both lateral sides
the inlet and outlet sides
An obstruction
in the overhead ss
(When the obstruction on the outlet side is higher than the
1000 or more
s
les r le
or 0o unit itself)
1000 or more
0 space 50
50
1 2
1) When the overhead space is open
(There is no limit to the height of the obstruction on the
outlet side.)
or 150 or 150
mo re mo
re mo re 0 1. For single unit 1 2
or 250 0o
r or 150 15 ore
mo
re
15 mo
re or
m
installation
H
L
s
s 10 les 10
les 0
mo or or 0
1000 or more
0o
r
re 50
0 1 2 mo or
50 re 10
0
mo or
re
10
0o
rm
L
1 1 ore
or 000 or 000
mo mo 25
re re 0o
or 250 rm
ore 0 0
mo ore 20 ore 30 ore
re rm m
0
20 ore 0o or or
m
or 250 m
2
or 00 30 00 00
mo or mo 10 ore 10 ore
re re or
m L H or
m
Note : As for other patterns of installation, please refer to Installation manual or Engineering Data Book.
67 68
MEMO
69 70