Professional Documents
Culture Documents
SLE123 - Sample Quiz 04 Questions
SLE123 - Sample Quiz 04 Questions
Quiz 04 -- Fluids
Description
By clicking on the Submit button, I certify that the attached work is entirely my own (or where submitted to meet the
requirements of an approved group assignment is the work of the group), except where work quoted or paraphrased is
acknowledged in the text. I also certify that it has not been previously submitted for assessment in this or any other unit or
course unless permission for this has been granted by the Unit Chair of this unit. I agree that Deakin University may make and
retain copies of this work for the purposes of marking and review, and may submit this work to an external plagiarism and
collusion-detection service who may retain a copy for future plagiarism and collusion detection but will not release it or use it
for any other purpose.
You will be given 3 attempts of this quiz over a 3-week period. Each attempt will have a time limit of 25 minutes. Each quiz will
have questions adding up to 20 marks. The questions have different mark allocations depending on difficulty.
The highest mark from the 3 attempts will count as the score for that quiz. Each quiz is worth 4% of the unit assessment.
TheStart
quizQuiz!
will close after three weeks.
1/3
Quiz 04 -- Fluids - SLE123 - Physics For The Life Sciences - CloudDeakin
Unless stated otherwise, for each question assume ideal situations (i.e. no air resistance, frictionless surfaces and isolated
systems).
Quiz Details
Current Time
Current User
Quiz Period
Time Allowed
0:25:00
Attempts
Allowed - 3, Completed - 0
Instructions
Before you submit the quiz, you will have the opportunity to return to questions that you may have missed or have not yet
answered.
2/3
Quiz 04 -- Fluids - SLE123 - Physics For The Life Sciences - CloudDeakin
Once the allocated time period that was set for this quiz expires, you are required to submit your quiz responses.
Note: Any responses entered after the time limit expires will not be submitted.
The timer will not begin until after the set up process is finished.
3/3
PLAGIARISM AND COLLUSION DECLARATION
By clicking on the Submit button, I certify that the attached work is entirely my own. I agree that Deakin University may make and retain
copies of this work for the purposes of marking and review, and may submit this work to an external plagiarism and collusion-detection
service who may retain a copy for future plagiarism and collusion detection but will not release it or use it for any other purpose.
Question 1 (1 point)
If you are standing on a scale in a room with half the pressure than normal atmospheric pressure, which is
true?
Question 1 options:
B) The scale would initially read lower and then correct to your true mass over time
A ball floats in water (density = 1000 kg/m3). The ball has a mass of 830 g and a diameter of 14
cm. Calculate the buoyant force.
Question 2 options:
A) 830 N
B) 8134 N
C) 8.13 N
D) 137 N
Question 3 (1 point)
A metal sphere with a circumference of 0.37 m has a mass of 1950 g. What is the density of the metal?
Question 3 options:
A) 0.228 g/cm3
B) 228 g/cm3
C) 2.28 kg/m3
D) 2.28 g/cm3
Question 4 (2 points)
The average depth of Bass Strait is 0.060 km. A fairy penguin (Eudyptula minor) dive averages
approximately 24 seconds to depths between 5 and 20 metres. The maximum dive depth is approximately
60 metres. A fairy penguin (also called little penguin) swims to a depth of 25 m in Bass Strait. What is the
increase in the pressure, compared to what it was at the sea surface?
Enter only the numerical part of your answer (in kPa), to the nearest integer.
Your Answer:
Question 5 (3 points)
A ball floats in water (density = 1000 kg/m3). The ball has a mass of 740 g and a diameter of 22
cm. Calculate the average density of the ball.
Question 5 options:
A) 16.6 kg/m3
B) 133 kg/m3
C) 1.33 kg/m3
D) 70 kg/m3
Question 6 (1 point)
With regards the densities of blocks A, B and C,
what is true?
Question 6 options:
A) ρC > ρA > ρB
B) ρB > ρA > ρC
C) ρA > ρB > ρC
D) ρA = ρB = ρC
Question 7 (1 point)
Question 7 options:
A) p1 = p2 = p3
B) p3 > p1 > p2
C) p1 = p2 > p3
D) p1 > p2 > p3
Question 8 (1 point)
An object is floating in a tub of kerosene. The object has 68% of its volume under the liquid’s surface. What
is the density of the object? (Density of kerosene is 810 kg/m3)
Question 8 options:
A) 680 kg/m3
B) 5398 kg/m3
C) 551 kg/m3
D) 810 kg/m3
Question 9 (2 points)
A) 2.57 × 104 kg
B) 2.57 × 1013 kg
C) 1.1 × 105 kg
D) 2570 kg
Question 10 (1 point)
The density of nitrogen at room temperature is 1.1606 kg/m3. What is the mass of nitrogen if it fills a room
that is 6.6 m × 12.1 m × 8.5 m?
Question 10 options:
A) 788 kg
B) 679 kg
C) 32 kg
D) 340 kg
Question 11 (1 point)
You measure pressure in one of your car tyres. The reading is 220 kPa. What is the absolute pressure in the
tyre?
Question 11 options:
A) 101 kPa
B) 321 kPa
C) 0 kPa
D) 220 kPa
Question 12 (3 points)
Question 12 options:
A) 0.005 N
B) 360.9 N
C) 3.61 × 106 N
D) 464 N
PLAGIARISM AND COLLUSION DECLARATION
By clicking on the Submit button, I certify that the attached work is entirely my own. I agree that Deakin University may make and retain
copies of this work for the purposes of marking and review, and may submit this work to an external plagiarism and collusion-detection
service who may retain a copy for future plagiarism and collusion detection but will not release it or use it for any other purpose.