Professional Documents
Culture Documents
Railclamp Low Capacitance Tvs Array: Protection Products - Railclamp Description Features
Railclamp Low Capacitance Tvs Array: Protection Products - Railclamp Description Features
RailClamp®
Low Capacitance TVS Array
PROTECTION PRODUCTS - RailClamp®
Description Features
The RailClamp® series consists of ultra low capacitance Transient protection for high-speed data lines to
TVS arrays designed to protect high speed data inter- IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
faces. This series has been specifically designed to IEC 61000-4-4 (EFT) 40A (5/50ns)
protect sensitive components which are connected to Flow through design for ease of layout for high
high-speed data and transmission lines from overvoltage speed data line application
caused by ESD (electrostatic discharge), CDE (Cable Protects up to two I/O lines & power line
Discharge Events), and EFT (electrical fast transients). Low capacitance (<0.9pF) for high-speed interfaces
They are designed for use in applications where board Ultra-small package requires less than 2.9mm2 of
space is at a premium. Each device requires less than PCB area
2.9mm2 of PCB area and will protect two high speed Low leakage current and clamping voltage
data lines.
Low operating voltage: 5.0V
The monolithic design incorporates surge rated, low Solid-state silicon-avalanche technology
capacitance steering diodes and a TVS diode in a single
package. Each line has a typical capacitance of 0.9pF to Mechanical Characteristics
ground and 0.3pF between lines. The capacitance of SC-89 (SOT-666) package
each line is well matched for consistant signal balance. RoHS/WEEE Compliant
Signal integrity is further preserved with the flow through
Lead Finish: matte tin
design. A connection to the TVS is provided for protec-
tion of external voltage busses, such as those found in
Molding compound flammability rating: UL 94V-0
USB applications. This device is optimized for ESD Marking: A
protection of portable electronics. They may be used to Packaging: Tape and Reel
meet the ESD immunity requirements of IEC 61000-4-2, Applications
Level 4 (±15kV air, ±8kV contact discharge).
The RClamp0502A is in a 6-pin, RoHS/WEEE compli- USB 2.0 High Speed
ant, SC-89 (SOT-666) package. It measures 1.6 x 1.6 10/100/1000 Ethernet Ports
x 0.6mm. The leads are finished with lead-free matte High-Definition Multimedia Interface (HDMI)
tin. The small package makes it ideal for use in por- Digital Visual Interface (DVI)
table electronics such as cell phones, laptops, and Monitors and Flat Panel Displays
digital still cameras. Video Graphics Cards
IEEE 1394 Firewire Ports High Speed
Circuit Diagram Schematic & PIN Configuration
Pin 5
1 6
3 4
Pin 2
PROTECTION PRODUCTS
Absolute Maximum Rating
R ating Symbol Value Units
PROTECTION PRODUCTS
Typical Characteristics
Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve
10 110
100
Peak Pulse Power - PPP (kW)
90
Clamping Voltage vs. Peak Pulse Current Clamping Voltage vs. Peak Pulse Current
I/O to Gnd - Pin 1, 3, 4, 6 to Pin 2 I/O to I/O
16 20
14
Clamping Voltage - VC (V)
12 15
Clamping Voltage - VC (V)
10
8 10
6
Waveform Waveform
4 5
Parameters: Parameters:
tr = 8µs tr = 8µs
2 td = 20µs td = 20µs
0
0
0 1 2 3 4
0 1 2 3 4
Peak Pulse Current - IPP (A) Peak Pulse Current - Ipp (A)
Normalized Capacitance vs. Reverse Voltage Normalized Capacitance vs. Reverse Voltage
I/O to Gnd - Pin 1, 3, 4, or 6 to Pin 2 I/O to I/O
1.2
1.4
f = 1 MHz
1.2
NormalizedCapacitance - Cj
Normalized Capacitance - Cj
1
0.8
0.8
0.6 0.6
0.4
0.4
0.2
f = 1 MHz
0 0.2
0 1 2 3 4 5 0 1 2 3 4 5
Reverse Voltage - VR (V) Reverse Voltage - VR (V)
PROTECTION PRODUCTS
Typical Characteristics
Insertion Loss S21 (I/O to I/O) Insertion Loss S21 (I/O to Gnd)
CH1 S21 LOG 6 dB / REF 0 dB CH1 S21 LOG 6 dB / REF 0 dB
1: .03430 dB 1: .00460 dB
900 MHz 900 MHz
2: .07870 dB 2: .02010 dB
1.8 GHz 1.8 GHz
3: .28040 dB 3: -.08180 dB
3
2.5 GHz 3
2.5 GHz
0 dB 0 dB
1 2 1 2
-6 dB -6 dB
-12 dB -12 dB
-18 dB -18 dB
-24 dB -24 dB
-30 dB -30 dB
-36 dB -36 dB
1 10 100 1 3 1 10 100 1 3
MHz MHz MHz GHz GHz MHz MHz MHz GHz GHz
START . 030 MHz STOP 3000. 000000 MHz START . 030 MHz STOP 3000. 000000 MHz
ESD Response (4kV Contact per IEC 61000-4-2) ESD Response (8kV Contact per IEC 61000-4-2)
Note: Data is taken with a 10x attenuator Note: Data is taken with a 10x attenuator
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Two Figure 1. Protection of Two Data Lines
High-Speed Data Lines and One Power Supply Line
PROTECTION PRODUCTS
Applications Information - Spice Model
BV Volt 110 20 8
PROTECTION PRODUCTS
Outline Drawing - SC-89 (SOT-666)
D
A
D
N
E/2
E1 E
L
1 2
e c
Nxb
B aaa C A-B D
DIMENSIONS
A
INCHES MILLIMETERS
DIM
MIN NOM MAX MIN NOM MAX
A .019 - .024 0.50 - 0.60
C b .005 - .012 0.15 - 0.30
c .003 - .007 0.10 - 0.18
L1 D .059 .063 .067 1.50 1.60 1.70
E .061 .063 .067 1.55 1.60 1.70
E1 .043 .047 .049 1.10 1.20 1.25
e .020 BSC 0.50 BSC
L .003 .008 .012 0.10 0.20 0.30
L1 .003 .006 .008 0.10 0.15 0.20
N 6 6
aaa .004 0.10
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
2. DIMENSIONS "E1" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS
OR GATE BURRS.
Y DIMENSIONS
DIM INCHES MILLIMETERS
C (.057) (1.45)
C P .020 0.50
Z G
G .024 0.60
X .012 0.30
Y .033 0.85
Y Z .090 2.30
NOTES:
1. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
PROTECTION PRODUCTS
Marking Ordering Information
Qty per Reel
Part Number Lead Finish
Reel Size
A A A
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Rd., Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804