Professional Documents
Culture Documents
ABB Surge Arrester POLIM-H SD - Data Sheet 1HC0075860 E02 AB
ABB Surge Arrester POLIM-H SD - Data Sheet 1HC0075860 E02 AB
Surge arrester
POLIM-H..SD
Technical data
-
Overvoltage protection of Short circuit rating I s 40 kA DC for 0.2 s
Traction systems
The thermal stability of the MO surge arrester is proved
--
Application in the operating duty test according class DC-B with
Direct current (DC) two times of the charge transfer capability.
Outdoor and indoor
Mechanical loads
Torque moment 50 Nm
Tensile strength axial 1000 N
Short term load SSL horizontal to axis 225 Nm
Long term load SLL horizontal to axis 180 Nm
General data
Ambient air temperature -60 to +40 °C (for higher values
contact manufacturer)
Altitude up to 1800 m (for higher values
contact manufacturer)
Weather ageing test 1000 h salt fog test
Electrical data
2 Polim-H..SD | Surge arrester
Housing
Dimensions (mm)
POLIM-H 1.5 SD
Type of arrester
Uc = Continuous operating voltage
Housing
Direct current
Surge arrester | Polim-H..SD 3
For further information please contact: Note
1HC0075860 E02 AB
We reserve the right to make technical changes or modify the contents of
ABB Switzerland Ltd this document without prior notice. With regard to purchase orders the
High Voltage Products a greed particulars shall prevail. ABB AG does not accept any responsibility
whatsoever for potential errors or possible lack of information in this docu-
Surge Arresters
ment. We reserve all rights in this document and in the subject matter and
Jurastrasse 45 illustrations contained therein. Any reproduction, disclosure to third parties
CH-5430 Wettingen/Switzerland or utilization of its contents – in whole or in parts – is forbidden without prior
Tel. +41 58 585 29 11 written consent of ABB AG.
www.abb.com/arrestersonline
Our products are certified according ISO 9001, 14001, 18001 and IRIS