Professional Documents
Culture Documents
General Arrangement Drawing: Section A-A
General Arrangement Drawing: Section A-A
PCC M15
U/S D/S
2 2
1 1
BED LEVEL
SLOPE 1:1200
SECTION A-A
'A'
CL OF CULVERT
DETAILS OF HEAD WALL
CL OF CULVERT
'A' 'A'
BED LEVEL
INVERT LEVEL
'B'
SECTION B-B
SLOPE 2:1
PLAN
NOTES:-
1. All dimentions are in mm and RL's in m.
2.Dimentions are not to be scaled.only written dimentions are to be followed.
3. Joint b/w pipes are to be made in such a way that sharp kink of shift is avoided.
4. The height of Cushion shall be minimum 600mm.
5. Skin Reinforcement 8 @ 200mm c/c both ways shall be provided on head wall
exposed surface.
6. ISI Marked NP-4 pipe is to be used.
7. Lognitudnal Slope of pipe should be minimum 1 in 1200.