This certificate certifies that Engr. Nadeem Khalid completed 40 hours of online training from March 23rd to 30th, 2021. The training covered basic power system design concepts, control and protection drawings, fault analysis, AC and DC load flow analysis, star coordination, arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable energy integration using ETAP software versions 12.6 and 19. The certificate was issued on March 31st, 2021 and signed by Engr. Qazi Arsalan Hamid.
This certificate certifies that Engr. Nadeem Khalid completed 40 hours of online training from March 23rd to 30th, 2021. The training covered basic power system design concepts, control and protection drawings, fault analysis, AC and DC load flow analysis, star coordination, arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable energy integration using ETAP software versions 12.6 and 19. The certificate was issued on March 31st, 2021 and signed by Engr. Qazi Arsalan Hamid.
This certificate certifies that Engr. Nadeem Khalid completed 40 hours of online training from March 23rd to 30th, 2021. The training covered basic power system design concepts, control and protection drawings, fault analysis, AC and DC load flow analysis, star coordination, arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable energy integration using ETAP software versions 12.6 and 19. The certificate was issued on March 31st, 2021 and signed by Engr. Qazi Arsalan Hamid.
THIS CERTIFICATE ENSURED ACTIVE PARTICIPATION OF ENGR. NADEEM KHALID (TRAINEE ID- AE0092-A-437G) IN PRACTICAL POWER SYSTEM SCHEME DESIGN AND SIMULATION (23RD – 30TH MARCH 2021-40 TRAINING HOURS), ENGR. NADEEM KHALID IS TRAINED AS SUPERVISOR FOR BASIC SLDS CONCEPTS,CONTROL AND PROTECTION DRAWINGS CONCEPT, FAULT CONCEPTS AND SIMULATION, AC & DC LOAD FLOW ANALYSIS, STAR COORDINATION(50,50N,51,51G,46,64G,87,27,81,32,52,21), AC & DC ARC FLASH ANALYSIS, AC & DC OPTIMAL AND UNBALANCED LOAD FLOW ANALYSIS, GROUNDING GRIDS, OPTIMAL CAPACITOR PLACEMENT, HARMONIC ANALYSIS, TRANSIENT ANALYSIS, PROTECTION SCHEMES DESIGNING ,STATIC AND DYNAMIC MOTOR ANALYSIS, RENEWABLE AND DG INTEGRATION AND ANALYSIS, SEQUENCE SWITCHING PROGRAMMING ON ETAP12.6 AND ETAP 19.