Professional Documents
Culture Documents
Prepared (Also Subject Responsible If Other) No.: With Adhesive Tape
Prepared (Also Subject Responsible If Other) No.: With Adhesive Tape
Prepared (Also Subject Responsible If Other) No.: With Adhesive Tape
SHIELDING GASKET
B L
Figure 1.
B L
Figure 2.
1 GENERAL
1.1 DESCRIPTION
2 DESIGN
2.2 DIMENSIONS
Dimensions in mm.
3 LIMITING VALUES
This product forms part of a product with a special safety approval. Changes
must not be introduced without previous confirmation by the design
responsible. The following requirements must be fulfilled:
5 PRODUCT QUALITY
No kinds of visible traces of fluids are allowed when the gasket has been
compressed for 24 hours.
6 MARKING
7 PACKING
4. Number of components.
PRODUCT SPECIFICATION 4 (4)
Prepared (also subject responsible if other) No.
9 NOTE
10 INTERNAL INFORMATION
10.2 MOUNTING
The mounting surfaces shall be smooth and free from grease, dirt or
insulating paint.
11 PRODUCT LIST
Revision Description
B Paragraph 12: Length added to product list.
C The specification has been rewritten.