Professional Documents
Culture Documents
All MCQ
All MCQ
QUESTION 2
If polymer is formed by single repeat unit, it is called ______________.
homopolymer
QUESTION 3
In Eclipse Software under Solution Section, Key word is used for
Equilibration data is _________.
EQUIL / SOLUTION
QUESTION 4
Hydrocarbon Flooding required pressure for LPG is _____________.
1200 psi
QUESTION 5
In Peripheral Injection Patterns, the injection wells are located at the
_____________________ of the reservoir and the oil is displaced
toward the interior of the reservoir.
external boundary
QUESTION 6
Low Salinity has been found to be more effective at injection water
salinity of ________________ TDS or less.
5000 ppm
QUESTION 7
Possible reserves often used for reserves which are claimed to have at
least a 10% certainty of being produced ("P10"). They are referred to
in the industry as ______.
3P
QUESTION 8
In naturally fractured reservoirs having vertical fractures higher coning
tendency. This is attributed to absence of _____________________.
transition zone
QUESTION 9
The well pattern having 2 injectors and 2 producer is
called________________.
methane
QUESTION 11
Enzymes can catalyze up to several million reactions per __________.
second
QUESTION 12
In Toe To Heel Air Injection (THAI) Method highest recovery is up
to _______ of original oil-in-place
80%
QUESTION 13
At less than 1800 ft, all reservoirs fail screening for either miscible or immiscible flooding with
__________________.
supercritical co2
QUESTION 14
Many water-injection projects use basal injection patterns with
additional benefits being gained from ______________________.
gravity segregation
QUESTION 15
___________is defined as physical. Chemical and biological properties
of water.
Water quality
QUESTION 16
_____________________is defined as the maximum allowable oil flow
rate that can be imposed on the well to avoid a cone breakthrough.
QUESTION 17
High Pressure Air Injection (HPAI) process can be applied in ____.
Tight and light oil reservoir
QUESTION 18
______________ is difficult to avoid as gas saturations once formed
may not be eliminated.
Gas coning
QUESTION 19
Colloidal Dispersion Gel is a solution of colloid size polymer
particles in water crossed linked by _____________________.
ammonium citrate
QUESTION 20
In Water Flooding Poor compatibility between injected water and
reservoir may cause __________________.
formation damage
QUESTION 21
If the flowing pressure drop at the well is high or the drainage will be
more than the critical rate, it will result in conversion of stable cone to
break into well; this situation cone is called ____________________.
QUESTION 22
The viscosity of polymer solution as a non- Newtonian fluid measured at
particular shear rate is known as_________________.
apparentviscosity
QUESTION 23
________________________is defined as ratio of mobility of brine
before polymer injection to mobility of brine after polymer
injection..
shrinkage
QUESTION 25
Sulphonated acrylamide copolymers can tolerate high ____________and
temperature up to 120 deg. C.
bivalent cation
QUESTION 26
In CMG Software input data file is used in _____________Format.
.dat
QUESTION 27
Low temperature microbes are anaerobic, thermophilic and _______________ (3% salinity).
halophilic
QUESTION 28
In ________________________ the flame front moves from the
injection well towards the producing well.
forward combustion
QUESTION 29
MEOR is family of microbial processes which involves injection of ___
________________to improve oil production from the well/ reservoir.
microbes and nutrients
QUESTION 30
N2/Flue gas Flooding Can be applied only in high gravity and ______________.
deep reservoir
QUESTION 31
Normally anionic surfactants are used for EOR applications. Some blends of different surfactants
are also used to get low IFT conditions and favorable ____________ changes.
wettability
QUESTION 32
Ratio of viscosity of polymer solution to viscosity of solvent is known as
_____________________.
relative viscosity
QUESTION 33
In Eclipse software under RUNSPEC Section Key word is used for
Unified output files is _________________.
NIFOUT
QUESTION 34
Incubation period of high temperature microbes for peak growth is
____________.
20 days
QUESTION 35
To simulate isothermal, simultaneous flow of oil, gas and water due to
viscous, gravitational and capillary forces by using
____________________________.
Black oil models
QUESTION 36
Reduction in effective permeability to brine mainly due to _____.
polymer adsorption, mechanica
QUESTION 37
The main factors responsible for success of in situ combustion is the
amount of ________ formed after burning of oil.
coke
QUESTION 38
PETREL RE software can be used from Enhancing Life Cycle of
Assets _________________________Approach.
QUESTION 39
________________ is stable upto 90 degree C.
xantham gun
QUESTION 40
The first step in____________in-situ combustion method is to ignite the
oil.
dryforward
QUESTION 41
Enzymes have been used to break cross-linked polymer chains as _________________.
visc-breakers
QUESTION 42
In Eclipse Software under Property (PROPS) Section, Key word is used
for Oil and water relative permeabilities in one table is ________.
SWOF
QUESTION 43
The possible reasons for the limited volumetric sweep efficiency have
been found to be due to Gravity effects and __________________.
mobility contrast
QUESTION 44
WAG injection is also called _______________.
tapering
QUESTION 45
Alkaline Surfactant Flooding process is normally applied in tertiary mode
to reduce _______________________.
ROS
QUESTION 46
In ______ only air is injected to maintain combustion at the front.
dry combustion
QUESTION 47
The Smart Surfactant system provides both low
_____________________between the injection water and residual oil
and the viscosity necessary for profile control.
interfacial tension
QUESTION 48
In Buckley-Leverett equation, the velocity of fixed water saturation can
be computed from the derivative of the ___________________ with
respect to water saturation.
fractional flow
QUESTION 49
Lateral breakthrough of water from a down-dip aquifer is called ____________.
cusping of water
QUESTION 50
In nanotechnology, Oil is trapped in tiny pores within these rocks and
travels between the pores through small passageways called
_______________.
pore throats