Professional Documents
Culture Documents
Bellow Seal Valves: AN ISO 9001:2000 COMPANY
Bellow Seal Valves: AN ISO 9001:2000 COMPANY
VALVES
Bellow Seal Gate Valves for a large PSF unit. 12” X #300 Bellow Seal Gate Valve, Butt Weld Ends.
WHY BELLOW SEAL VALVE ?
It has been proven through various studies about process plant emissions
that 75% of leakages cause:
1) Environment pollution.
2) Production Loss.
3) Process problems and
4) Energy loss.
CLASS: 150
SIZE - (mm) 15 20 25 40
Overall Length 108 118 127 165
Flange 89 98.5 108 127
Flange Thk 11 13 14.5 17.5
R. F. 35 43 51 73 FLANGED ENDS
R. F. Thk 2 2 2 2
Flange P.C.D. 60.3 70 79.4 98.4 TECHNICAL DATA
No. of Holes/Hole 4/16 4/16 4/16 4/16 Design as per BS-5352/API 602
(Standard Port)
CLASS: 300 Testing as per API-598
Socket Weld Ends to ANSI B 16.11
SIZE - (mm) 15 20 25 40
40
Butt Weld Ends to ANSI B 16.25
Overall Length 153 178 203 229 Threaded Ends to ANSI B 1.20.1 (BSP/ BSPT /
Flange 96 117.5 124 156 NPT)
Flange Thk 14.3 16 17.5 21 Overall length as per UKL standard.
R. F. 35 43 51 73 FLANGED VALVES
R. F. Thk 2 2 2 2
Flanged Ends to ANSI-16.5
Flange P.C.D. 66.7 82.6 89 114.3 Overall length as per ANSI-B-16.10
No. of Holes/Hole 4/16 4/19 4/19 4/22
ACCESSORIES
Pneumatic Actuators
Hand Wheel Locking
Extended Stem
GLOBE VALVE - CAST
SR. PART CARBON STEEL STAINLESS STEEL
CLASS : 150
SIZE - NB (mm) 15 20 25 40 50 65 80 100 150 200 250 300 TECHNICAL DATA
Overall Length 108 118 127 165 203 216 241 292 406 495 622 698 Design as per BS 1873 / ANSI
Flange 89 98.5 108 127 152 178 191 229 279 343 406 482 B 16.34
Testing as per API 598
Flange Thk 11 13 14.5 18 19 22 25 25 26 29 30 32
Flanged Ends to ANSI B16.5
R. F. 35 43 51 73 92 105 127 157 216 270 324 381 Butt Weld Ends to ANSI B
R. F. Thk 2 2 2 2 2 2 2 2 2 2 2 2 16.25
Flange P.C.D. 60.3 70 79.4 98.4 121 140 152 191 241 299 362 432 Overall length as per ANSI
No. of Holes/ 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25 B16.10
Hole Also Available Valves as
Per DIN Standards
CLASS : 300
SIZE - NB (mm) 15 20 25 40 50 65 80 100 150 200 250 300 ACCESSORIES
Overall Length 153 178 203 229 267 292 318 356 445 559 622 711 Gear Actuator
Flange 96 117.5 124 156 165 191 210 254 318 381 445 521 Pneumatic Actuator
Flange Thk 14.3 16 17.5 21 22 25 29 32 37 41 17 51
R. F. 35 43 51 73 92 105 127 157 216 270 324 381 NOTES
R. F. Thk 2 2 2 2 2 2 2 2 2 2 2 2 Alternate Bellow Material:
Flange P.C.D. 66.7 82.6 89 114 127 149 168 200 270 330 384 451 HC - 276 / Monel / Inconel
No. of Holes/ 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32
Alternate Body Material:
Hole On request as per spec.
GATE VALVE - FORGED
SR. PART CARBON STEEL STAINLESS STEEL
CLASS: 150
SIZE - (mm) 15 20 25 40
Overall Length 108 118 127 165
Flange 89 98.5 108 127
Flange Thk 11 13 14.5 17.5
R. F. 35 43 51 73 FLANGED END
R. F. Thk 2 2 2 2
Flange P.C.D. 60.3 70 79.4 98.4 TECHNICAL DATA
No. of Holes/Hole 4/16 4/16 4/16 4/16 Design as per BS-5352/API 602 (Reduced Port)
Testing as per API 598
CLASS: 300 Socket Weld Ends to ANSI B 16.11
Butt Weld Ends to ANSI B 16.25
SIZE - (mm) 15 20 25 40 Threaded Ends to ANSI B 1.20.1 (BSP/ BSPT /
Overall Length 153 178 203 229 NPT)
Flange 96 117.5 124 156 Overall Length as per UKL Standards
Flange Thk 14.3 16 17.5 21
R. F. 35 43 51 73 FOR FLANGED VALVES
R. F. Thk 2 2 2 2 Flanged Ends to ANSI-16.5
Flange P.C.D. 66.7 82.6 89 114.3 Overall Length as per ANSI-B-16.10
No. of Holes/Hole 4/16 4/19 4/19 4/22
ACCESSORIES
Pneumatic Actuators
Hand Wheel Locking
Extended Stem
GATE VALVE - CAST
Sr. PART CARBON STEEL STAINLESS STEEL
CLASS : 150
SIZE - (mm) 50 65 80 100 150 200 250 300 TECHNICAL DATA
Overall Length 178 191 203 229 267 290 330 355 Design as per API 600
Flange 152 178 191 229 279 343 406 483 Testing as per API 598
Flange Thk 19 22 22 24 26 29 30 32 Flanged Ends to ANSI-16.5
R. F. 92 105 127 157 216 270 324 381 Overall Length as per ANSI B16.10
R. F. Thk Butt Weld Ends as per B16.25
2 2 2 2 2 2 2 2
Also Available Valves as
Flange P.C.D. 121 140 152 191 241 299 362 432
Per DIN Standards
No. of Holes/ 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25
Hole
ACCESSORIES
CLASS : 300 Gear Actuator
SIZE - (mm) 50 65 80 100 150 200 250 300 Pneumatic Actuator
Overall Length 216 241 283 305 403 419 457 502
Flange 165 191 210 254 318 381 444 521
Flange Thk 22 26 29 32 37 41 47 51
R. F. 92 105 127 157 216 270 324 381
R. F. Thk 2 2 2 2 2 2 2 2
Flange P.C.D. 127 149 168 200 270 330 387 451
No. of Holes/ 8/19 8/22 8/22 8/22 12/22 12/25 16/28 16/32
Hole
GLOBE VALVE - CHLORINE APPLICATION
SR. PART MATERIAL : CAST
CARBON STEEL
1 BODY A 216 Gr. WCB / A 352 Gr. LCB / LCC
2 BONNET A 216 Gr. WCB / A 352 Gr. LCB / LCC
3 PLUG HC / MONEL / AISI 316L / LCB
4 SEAT HC / MONEL / AISI 316L / LCB
5 STEM HC / MONEL / AISI 316L
6 GASKET Spiral Wound + PTFE
7 BELLOW Hastalloy - C - 276 / 316 Ti
8 BELLOW COLLARS Hastalloy - C / AISI 316L
9 BONNET STUD / NUT ASTM A 193 Gr. 88 / ASTM A 194 Gr. 8
10 STUFFING BOX HC / MONEL / AISI 316L
11 GLAND PACKING PTFE
12 GLAND BUSH HC / MONEL / AISI 316L
13 GLAND FLANGE AISI 304/316 / LCB
14 CROSS BOLT & NUT AISI 304/316
15 YOKE SLEEVE Ni-Resist
16 HAND WHEEL C.S. Fab.
17 PILLARS AISI 410
FLANGED ENDS
CLASS : PN 40
SIZE - (mm) 15 20 25 40 50 65 80 100 150 TECHNICAL DATA
Overall Length 130 150 160 200 230 290 310 350 480 Design as per BS 1873
Testing as per API 598
Flange 95 105 115 150 165 185 200 235 360
Flanged Ends to ANSI B 16.5
Flange Thk 16 18 18 18 20 22 24 24 28 Butt Weld Ends to ANSI B16.25
R. F. 45 58 68 88 102 122 138 162 218 Overall Length as per ANSI B 16.10
R. F. Thk 2 2 2 2 2 3 3 3 3
Flange P.C.D. 65 75 85 110 125 145 160 190 250
No. of Holes/Hole 4/14 4/14 4/14 4/18 4/18 8/18 8/18 8/22 8/26
CLASS : 300
SIZE - (mm) 15 20 25 40 50 65 80 100 150
Overall Length 153 178 203 229 269 292 318 356 445
Flange 95 118 124 156 165 191 210 254 318
Flange Thk 14 16 18 21 22 25 29 32 37
R. F. 35 43 51 73 92 105 127 157 216
R. F. Thk 2 2 2 2 2 2 2 2 2
Flange P.C.D. 67 83 89 114 127 149 168 200 270
No. of Holes/Hole 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22
GLOBE VALVE - FORGED
CRYOGENIC APPLICATION
CLASS: 150
SIZE - (mm) 15 20 25 40
Overall Length 108 118 127 165
Flange 89 98.5 108 127 FLANGED ENDS
Flange Thk 11 13 14.5 17.5
R. F. 35 43 51 73
R. F. Thk 2 2 2 2 TECHNICAL DATA
Flange P.C.D. 60.3 70 79.4 98.4
Design as per BS-5352/API 602 (Standard Port)
No. of Holes/Hole 4/16 4/16 4/16 4/16 Testing as per API-598
Socket Weld Ends to ANSI-B-16.11
CLASS: 300 Butt Weld Ends to ANSI-B-16.25
Threaded Ends to ANSI-B-1.20.1 (BSP/ BSPT /
SIZE - (mm) 15 20 25 40 NPT)
Overall Length 153 178 203 229 Overall Length as per UKL Standards.
Flange 96 117.5 124 156
FOR FLANGE ENDS
Flange Thk 14.3 16 17.5 21
43 51 73 Flanged Ends to ANSI 16.5
R. F. 35
Overall Length as per ANSI B 16.10
R. F. Thk 2 2 2 2
Flange P.C.D. 66.7 82.6 89 114.3 ACCESSORIES
No. of Holes/Hole 4/16 4/19 4/19 4/22
Pneumatic Actuators
Hand Wheel Locking
Extended Stem
GLOBE VALVE - CAST
CRYOGENIC APPLICATION
SR PART CARBON STEEL STAINLESS STEEL
1 BODY ASTM/ A 352 Gr, LCB / LCC ASTM A 351 Gr. CF8/CF8M
2 BONNET ASTM/ A-352 Gr, LCB / LCC ASTM A 351 Gr. CF8/CF8M
3 BELLOW CHAMBER ASTM/ A-352 Gr, LCB / LCC/ A106 ASTM A 351 Gr. CF8/CF8M
4 PLUG A-352 Gr, LCB / LCC / CA 15 ASTM A 351 Gr. CF8/CF8M
5 SEAT ASTM 304 / LCB / LCC AISI 304/316
6 STEM AISI 304 AISI 304/316
7 GASKET SPIRAL WOUND SPIRAL WOUND
8 BELLOW AISI 316 Ti AISI 316 Ti
9 BONNET STUD/NUT ASTM A 193 Gr. B7 ASTM A193 Gr. B8
ASTM A 194 Gr.2H ASTM A 194 Gr.8
10 GLAND PACKING PTFE PTFE
11 GLAND BUSH AISI 304 AISI 304/ 316
12 GLAND FLANGE AISI 304 AISI 304
13 CROSS BOLT & NUT AISI 304 AISI 304
14 EYE BOLT & NUT AISI 304 AISI 304
15 YOKE SLEEVE Ni-Resist Ni-Resist
FLANGED ENDS
16 HAND WHEEL CS Fab CS Fab
17 BELLOW COLLAR AISI 316 AISI 316
CLASS : 150
SIZE - NB (mm) 15 20 25 40 50 65 80 100 150 200 TECHNICAL DATA
Design as per BS 1873 /
Overall Length 108 118 127 165 203 216 241 292 406 495
ANSI B 16.34
Flange 89 98.5 108 127 152 178 191 229 279 343
Testing as per API 598
Flange Thk 11 13 14.5 18 19 22 25 25 26 29 Flanged Ends to
R. F. 35 43 51 73 92 105 127 157 216 270 ANSI B 16.5
R. F. Thk 2 2 2 2 2 2 2 2 2 2 Butt Weld Ends to
Flange P.C.D. 60.3 70 79.4 98.4 121 140 152 191 241 299 ANSI B 16.25
No. of Holes/Hole 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 Overall Length as per
ANSI B 16.10
Also Available Valves as
CLASS : 300 Per DIN Standards
SIZE - NB (mm) 15 20 25 40 50 65 80 100 150 200
Overall Length 153 178 203 229 267 292 318 356 445 559 ACCESSORIES
Flange 96 117.5 124 156 165 191 210 254 318 381 Gear Actuator
Flange Thk 14.3 16 17.5 21 22 25 29 32 37 41 Pneumatic Actuator
R. F. 35 43 51 73 92 105 127 157 216 270
R. F. Thk 2 2 2 2 2 2 2 2 2 2
Flange P.C.D. 66.7 82.6 89 114 127 149 168 200 270 330
No. of Holes/Hole 4/16 4/19 4/19 4/32 8/19 8/22 8/22 8/22 12/22 12/25
GATE VALVE - FORGED
CRYOGENIC APPLICATION
SR. PART STAINLESS STEEL
CLASS: 150
SIZE - (mm) 15 20 25 40
Overall Length 108 118 127 165
Flange 89 98.5 108 127
Flange Thk 11 13 14.5 17.5 FLANGED END
R. F. 35 43 51 73
TECHNICAL DATA
R. F. Thk 2 2 2 2
Flange P.C.D. 60.3 70 79.4 98.4 Design as per BS-5352/API 602 (Reduced Port)
Testing as per API-598
No. of Holes/Hole 4/16 4/16 4/16 4/16
Socket Weld Ends to ANSI B 16.11
Butt Weld Ends to ANSI B 16.25
CLASS: 300 Threaded Ends to ANSI B 1.20.1 (BSP/ BSPT /
SIZE - (mm) NPT)
15 20 25 40
Overall Length as per UKL Standards.
Overall Length 153 178 203 229
Flange 96 117.5 124 156 FOR FLANGE ENDS
Flange Thk 14.3 16 17.5 21 Flanged Ends to ANSI 16.5
R. F. 35 43 51 73 Overall Length as per ANSI B 16.10
R. F. Thk 2 2 2 2 ACCESSORIES
Flange P.C.D. 66.7 82.6 89 114.3 Pneumatic Actuators
No. of Holes/Hole 4/16 4/19 4/19 4/22 Hand Wheel Locking
Extended Stem
GATE VALVE - CAST
CRYOGENIC APPLICATION
SR PART MATERIAL : CAST MATERIAL CAST
CARBON STEEL STAINLESS STEEL
1 BODY ASTM/ A-352 Gr, LCB / LCC ASTM A 351 Gr. CF8/CF8M
2 BONNET ASTM/ A-352 Gr, LCB / LCC ASTM A 351 Gr. CF8/CF8M
3 BELLOW CHAMBER LCS FAB SS FAB
4 WEDGE AISI 304 / LCB / LCC ASTM A 351 Gr. CF8/CF8M
5 SEAT ASTM 304 / LCB / LCC AISI 304/316
6 STEM AISI 304 AISI 304/316
7 GASKET SPIRAL WOUND SPIRAL WOUND
8 BONNET STUD/NUT ASTM A 193 Gr. B7 ASTM A 193 Gr. B8
ASTM A 194 Gr.2H ASTM A194 Gr.8
9 BONNET BUSH AISI 304 AISI 304 / 316
10 GLAND PACKING PTFE PTFE
11 GLAND BUSH AISI 304 AISI 304/ 316
12 GLAND FLANGE AISI 304 AISI 304
13 CROSS BOLT & NUT AISI 304 AISI 304
14 EYE BOLT & NUT AISI 304 AISI 304
15 YOKE SLEEVE Ni-Resist Ni-Resist
16 HAND WHEEL CS Fab CS Fab Cast Bellow Seal
Gate Valve -
17 BELLOW AISI 316 Ti AISI 316 Ti
Flanged Ends
18 BELLOW COLLAR AISI 316 AISI 316
CLASS : 150
SIZE - (mm) 50 65 80 100 150 200 250 300 TECHNICAL DATA
Overall Length 178 191 203 229 267 29 330 355 Design as per API 600
Flange 152 178 191 229 279 343 406 483 Testing as per API-598
Flange Thk 19 22 22 24 26 29 30 32 Flanged Ends to ANSI 16.5
R. F. Overall Length as per ANSI-B 16.10
92 105 127 157 216 270 324 381
Butt Weld Ends as per ANSI-B16.25
R. F. Thk 2 2 2 2 2 2 2 2
Also Available Valves as
Flange P.C.D. 121 140 152 191 241 299 362 432 Per DIN Standards
No. of Holes/Hole 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25
CLASS : 300
SIZE - (mm) 50 65 80 100 150 200 250 300
Overall Length 216 241 283 305 403 419 457 502
Flange 165 191 210 254 318 381 444 521
Flange Thk 22 26 29 32 37 41 47 51
R. F. 92 105 127 157 216 270 324 381
R. F. Thk 2 2 2 2 2 2 2 2
Flange P.C.D. 127 149 168 200 270 330 387 451
No. of Holes/Hole 8/19 8/22 8/22 8/22 12/22 12/25 16/28 16/32
COMMON MATERIALS & SURFACE PROTECTION
BODY AND BONNET MATERIALS TRIM MATERIALS
FOR LIQUIDS :
2
(1) Q1 = CV P (2) P = GL QL
G CV
FOR STEAM:
Where: Ql=Flow in L.S. Gallons per minute.
P =(P1 -P2)Pressure drop in psi.
(5) w= 2.1 P (P1+ P2)
0 1+0.0007Ts
G1= Specific gravity of liquid (Water = 1 at 60 F)
FOR GASES: (6) P =P1- P12 - 2 K
(3) Qg = 1360Cv P
GgT W W = Pounds per hour of steam
2 Where :K 1=0.0007Ts P=(P1-P2) Pressure drop in psi
(4) P = P1- P1-2GgT Qg 2.1c Ts = Degree of superheat (0F)
1360Cv
NOTE : For saturated steam Ts = 0
WHERE: Qg = Volumetric flow of gas (SCFH)
Gg= Specific gravity of gas at standard conditions
NOTE : for gas and steam, max, P = 1/2 P1, and min P2 = 1/2 P1
(air at atmosphere and 600 F=1)
and P1, P2 are absolute pressure lpsia)
T = Absolute temperature of gas ( F + 4600) P1, = inlet pressure, P2 = outlet pressure.
PRESSURE-TEMPERATURE RATINGS
-29 to 380C 51.1 47.9 47.9 51.7 51.7 51.7 51.7 49.6 49.6 49.6
50 50.1 47.3 47.6 51.1 51.2 51.7 51.7 47.8 48.1 47.8
100 46.4 45.1 46.6 48.8 49.0 51.5 51.5 40.9 42.2 40.9
150 45.2 44.0 45.0 46.4 46.6 50.2 50.2 36.3 38.5 36.3
200 43.8 42.7 44.2 45.5 44.8 48.8 48.8 32.8 35.7 32.8
250 41.7 40.6 43.1 44.5 44.2 46.3 46.3 30.5 33.4 30.5
300 38.7 37.7 42.0 42.4 42.4 42.4 42.4 29.1 31.6 29.1
350 37.6 36.0 40.2 40.2 40.2 40.2 40.2 28.1 30.4 28.1
400 34.5 36.6 36.6 36.6 36.6 36.6 27.7 29.1 27.5
425 28.8 35.1 35.1 35.1 35.1 35.1 27.2 28.7 27.2
450 20.2 33.8 33.8 33.8 30.9 33.8 26.9 28.1 26.9
500 8.8 24.1 27.8 27.8 20.3 27.5 26.1 26.3
525 5.8 15.0 23.0 21.9 15.4 22.6 23.9 25.0
550 12.8 16.4 11.7 17.0 21.8 21.4
600 5.9 7.6 6.5 7.2 16.7 14.1
650 3.0 3.5 10.5 9.9
700 6.0 5.9
750 3.7 3.5
800 2.1
(a) Permissible, but not recommended for prolonged usage above 4250C (8000F) (d) Not to be used over 5930 C(11000F)
(b) Not be used over 3430C (6500F) (e) Not to be used over 4250 C (8000F)
(c) Permissible, but not recommended for prolonged usage above 4550C (8500F) (f) Not to be used over 4550 C (8500F)
PRESSURE-TEMPERATURE RATINGS
-29 to 38 102.1 95.7 95.8 103.4 103.4 103.4 103.4 99.2 99.3 99.2 99.3
50 100.2 94.6 95.3 102.3 102.4 103.4 103.4 95.7 96.3 95.7 96.3
100 92.8 90.2 93.2 97.5 98.1 103.1 103.1 81.8 84.4 81.8 84.4
150 90.5 87.9 89.8 92.7 93.3 100.4 100.4 72.7 77.0 72.7 77.0
200 87.6 85.4 88.4 91.0 89.7 97.6 97.6 65.5 71.3 65.5 71.3
250 83.4 81.2 86.2 88.9 88.4 92.7 92.7 61.1 66.8 61.1 66.8
300 77.5 75.4 84.1 84.9 84.9 84.9 84.9 58.1 63.3 58.1 63.3
350 73.9 71.9 80.5 80.5 80.5 80.5 80.5 56.1 60.8 56.1 60.8
400 69.0 73.2 73.2 73.2 73.2 73.2 54.9 58.2 54.9 58.2
425 57.5 70.2 70.2 70.2 69.0 70.2 54.3 57.3 54.3 57.3
450 40.1 37.6 67.6 67.6 61.8 61.6 53.7 56.2 53.7 56.2
500 17.6 48.1 55.6 55.6 40.5 55.0 52.1 53.7 53.7
525 10.4 30.1 40.5 43.8 30.8 45.2 47.8 52.6
550 25.5 32.7 23.4 34.0 43.6 49.9
600 11.8 15.3 13.1 14.4 33.4 42.9
650 7.0 21.0 28.2
700 12.0 19.9
750 7.3 11.0
800
0
(a) Permissible, but not recommended for prolonged usage above 425 C (800 F)
0 (e) Not to be used over 4250C (8000F)
0
(b) Not be used over 3430C (650 F) (f) Not to be used over 4550C (8500F)
(c) Permissible, but not recommended for prolonged usage above 4550C (8500F) (g)For welding end valves only
(d) Not to be used over 5930C (11000F)
-29 to 38 153.2 143.6 143.6 155.1 155.1 155.2 155.2 148.9 148.9 148.9 148.9
50 150.2 141.9 142.9 153.4 153.6 155.2 155.2 143.5 144.4 143.5 144.4
100 139.1 135.3 139.8 145.3 147.1 154.6 154.6 122.6 126.6 122.6 126.6
150 135.7 131.9 134.9 139.1 139.9 150.6 150.6 109.0 115.5 109.0 115.0
200 131.5 128.0 132.6 136.4 134.5 146.4 146.4 98.3 107.0 98.3 108.0
250 125.2 121.8 129.2 133.4 132.7 139.0 139.0 91.6 100.2 91.6 100.2
300 116.2 113.1 126.1 127.3 127.3 127.3 127.3 87.2 94.9 87.2 94.9
350 110.9 107.9 120.7 120.7 120.7 120.7 120.7 84.2 91.3 84.2 91.3
400 103.5 109.8 109.8 109.8 109.8 109.8 82.4 87.3 82.4 87.3
425 86.3 105.3 105.3 105.3 103.5 105.3 81.5 86.0 81.5 86.0
450 60.1 101.4 101.4 101.4 92.7 101.4 80.6 84.2 80.6 84.2
500 26.4 72.2 83.4 83.4 60.8 82.5 78.2 80.5 80.5
525 15.5 45.1 60.1 65.8 46.3 67.8 71.6 78.9
550 38.3 49.1 35.0 50.9 65.4 74.9
600 17.6 22.9 19.6 21.5 50.1 64.3
650 9.0 10.4 31.6 42.4
700 17.9 29.8
750 11.0 17.6
800 6.2 10.5
(a) Permissible, but not recommended for prolonged usage above 4250 C(8000F) (d) Not to be used over 5930C (1100 F)
0
(b) Not be used over 3430C (6500F) (e) Not to be used over 4250C (8000F)
(c) Permissible, but not recommended for prolonged usage above 4550 C (8500 F) (f) Not to be used over 4550C (8500F)
CHEMICAL COMPOSITION
ASTM Physical Properties
Specification Chemical Composition %
kg/ kg/ %
No. Gr. c Min P s si Cr %
Mo Ni others mm2 mm 2
Ap C
R s
A216 WCB Max. 0.30 Max. 1.0 Max. 0.05 Max. 0.06 Max. 0.60 – -- -- -- 49.2 25.3 22 35
A217 WC 1 Max. 0.25 0.50 - 0.80 Max. 0.05 Max. 0.06 Max. 0.60 -- 0.45 - 0.65 -- -- 45.7 24.6 24 35
A217 WC 5 Max. 0.20 0.40 - 0.70 Max. 0.05 Max. 0.06 Max. 0.60 0.50 - 0.90 0.90 - 1.20 0.50 -1.00 -- 49.2 28.1 20 35
A217 WC 6 Max. 0.20 0.50 - 0.80 Max. 0.05 Max. 0.06 Max. 0.60 1.00 - 1.50 0.45 - 0.65 -- -- 49.2 28.1 20 35
A217 WC 9 Max. 0.18 0.40 - 0.70 Max. 0.05 Max. 0.06 Max. 0.60 2.00 - 2.75 0.90 - 1.20 -- -- 49.2 28.1 20 35
Max. 0.05 Max. 0.06 Max. 0.75 4.00 - 6.50 0.45 - 0.65 -- -- 63.3 42.2 .18 35
A217 C5 Max. 0.20 0.40 - 0.70
-- --
A217 C 12 Max. 0.20 0.35 - 0.65 Max. 0.05 Max. 0.06 Max. 1.00 8.00 - 10.00 0.90 - 1.20 63.3 42.2 18 35
Max. 1.00 --
A351 CA 15 Max. 0.15 Max 1.0 Max. 0.04 Max. 0.04 Max. 1.50 11.50 - 14.00 Max - 0.50 63.3 45.7 18 30
A351 CF 8 Max. 0.8 Max 1.50 Max. 0.04 Max. 0.04 Max. 2..00 18.00 - 21.00 -- 8.00 - 11.00 Cb {min8xC 49.2 19.7 35 --
A351 CF 8 C Max. 0.8 Max 1.50 Max. 0.04 Max. 0.04 Max. 2..00 18.00 - 21.00 -- 9.00 - 12.00 Max 1.00} 49.2 21.1 30 --
A351 CF 8M Max. 0.8 Max 1.50 Max. 0.04 Max. 0.04 Max. 1.50 18.00 - 21.00 2.00 - 3.00 9.00 - 12.00 -- 49.2 21.1 30 --
-- -- 2.00 - 3.00 -- 45.7 28.1 24 35
A352 LC 2 Max. 0.25 0.50 - 0.80 Max. 0.05 Max. 0.05 Max. 0.60
-- 3.00 - 4.00 --
A352 LC 3 Max. 0.15 0.50 - 0.80 Max. 0.05 Max. 0.05 Max. 0.60 -- -- 45.7 28.1 24 35
A352 LC B Max. 0.30 Max. 1.00 Max. 0.05 Max. 0.06 Max. 0.60 -- -- -- 45.7 24.5 24 35
A 181 I Max. 0.35 Max. 0.90 Max. 0.05 Max. 0.05 Max. 0.35 -- -- -- --
49.2 21.1 22 35
A 181 II Max. 0.35 Max. 0.90 Max. 0.04 Max. 0.05 Max. 0.35 -- -- -- --
49.2 25.3 18 24
A 182 F1 0.20 - 0.30 0.50 - 0.85 Max. 0.04 Max. 0.04 0.20 - 0.35 -- 0.40 - 0.60 -- --
49.2 28.1 25 35
A 182 F12 0.10 - 0.20 0.30 - 0.80 Max. 0.04 Max. 0.04 0.10 - 0.60 0.85 - 1.20 0.45 - 0.65 -- --
49.2 28.1 20 30
A 182 F11 0.10 - 0.20 0.30 - 0.80 Max. 0.04 Max. 0.04 0.50 - 1.00 1.00 - 1.50 0.45 - 0.65 -- --
49.2 28.1 20 30
A 182 F22 Max. 0.15 0.30 - 0.60 Max. 0.04 Max. 0.04 Max. 0.50 2.00 - 2.50 0.90 - 1.10 -- --
49.2 28.1 20 30
A 182 F5 Max. 0.15 0.30 - 0.60 Max. 0.03 Max. 0.03 Max. 0.50 4.00 - 6.00 0.45 - 0.65 Max - 0.50 --
42.2 21.1 22 50
A 182 F9 Max. 0.15 0.30 - 0.60 Max. 0.03 Max. 0.03 0.50 - 1.00 8.00 - 10.00 0.90 - 1.10 -- --
70.3 49.2 20 40
A 182 F6 Max. 0.12 Max. 1.00 Max. 0.04 Max. 0.03 Max. 1.00 11.50 - 13.50 -- Max - 0.50 Cb+Ta (min 10
59.8 38.7 25 60
A 182 F 304 Max. 0.06 Max. 2.00 Max. 0.04 Max. 0.03 Max. 1.00 18.00 - 20.00 -- 8.0 - 11.00 xc Max 1.00
52.7 21.1 45 50
A 182 F 310 Max. 0.15 Max. 2.00 Max. 0.04 Max. 0.03 Max. 1.00 24.00 - 26.00 -- 19.00 - 22.00 Ti(min 5xc
52.7 21.1 35 40
A 182 F 347 Max. 0.06 Max. 2.00 Max. 0.03 Max. 0.03 Max. 1.00 17.00 - 20.00 -- 9.00 - 13.00 Max 0.60)
52.7 21.1 45 50
A 182 F 321 Max. 0.08 Max. 2.50 Max. 0.35 Max. 0.03 Max. 0.85 min. 17.00 -- min. 9.00 --
52.7 21.1 45 50
A 182 F 316 Max. 0.08 Max. 2.00 Max. 0.04 Max. 0.03 Max. 1.00 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 --
52.7 21.1 45 50
A 350 F 10 0.01 - 0.20 0.50 - 0.80 Max. 0.03 Max. 0.03 1.00 - 1.40 7.00 - 9.00 -- 19.00 - 22.00 --
56.2 21.1 40 38
A 350 LF 1 Max. 0.30 Max 1.06 Max. 0.04 Max. 0.05 - -- -- -- --
42.2 21.1 25 50
LF 3 Max. 0.20 0.30 - 0.60 Max. 0.04 Max. 0.40 0.15 - 0.35 -- -- 3.25 - 3.75 --
49.2 28.1 25 50
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
HASTELLOY B 61 -- 5 28 -- 1 -- 0.05 -- -- 2.5 60-92 35-40 15-50
HASTELLOY C 54 -- 6 16 -- 15.1 -- 0.08 -- 4 2.5 56-91 36-48 10-49
MONEL B 63 - 68 Resto 3.0 -- 0.5 - 1.5 -- 3.5-4.0 0.12 0.05 -- -- 63-71 -- Nullo
MONEL K 63 - 70 27-33 2.0 -- 1.5 -- 1.0 0.25 0.01 -- -- 2.4 91-107 57-77 30-20
NICKEL 98 -- -- -- -- -- 1.5 0.8 -- -- -- -- 41
-- 18
NICKEL 201 99 0.25 0.40 -- 0.35 -- 0.35 0.15 0.01 -- -- -- 37
12 50
STELLITE N 6 -- -- -- -- 0.25 29 0.20 1.4 -- 8 60 -- --
-- --
APPLICATIONS
ISO 9001:2000
, Salespune@uniklinger.com
Plot No.234, Baikampady Industrial Area, Mangalore-575011. Karnataka (India)
Tel.: 0824-2407531 / Telefax: 0824-2407532 e-mail: fcdmangalore@uniklinger.com