Professional Documents
Culture Documents
PT00008291 - Valleylab Exchange Setup Guide VLLS10GEN
PT00008291 - Valleylab Exchange Setup Guide VLLS10GEN
BEFORE YOU START You will need a laptop, USB A to B cable, and small Phillips-head
screwdriver.
IMPORTANT The Valleylab™ LS10 generator must be set up before use. A warning
symbol appears on the generator until it has been set up.
Follow the steps below to set up your generator. If you need additional help, go to www.
covidien.com/valleylabexchange, select the Valleylab™ LS10 generator, and download the First-
Time Setup Tutorial. For the Valleylab™ LS10 Service Manual, go to www.BioMedConnect.com.
3. L ocate the VLEXClient icon on your desktop and double-click it to start the
STEP 3 software. When the User Account Control pop-up displays, click Yes.
NOTE For first-time setup, a username and password are not required.
4. C
lick First-Time Setup located on the lower left corner of the
Valleylab™ Exchange Sign In screen. This will establish the initial
connection to the server to configure Valleylab™ Exchange.
5. When
the new window opens, verify a green indicator next to Server in the
menu on the left, and a green indicator showing Online in the lower right
corner.
1. G
ain access to the USB port through the back cover plate of
the generator. Plug the USB A to B cable into your computer
and port at the back of the generator.
6. F rom the drop down list, select the country where the
generator will be used and click Apply.
STEP 5 7. W
hen the green status bar is at 100%, location selection is
complete.
9. Disconnect the USB cable and replace the back cover plate
on the generator.
STEP 6
COVIDIEN, COVIDIEN with logo and Covidien logo are U.S. and internationally registered 5920 Longbow Drive 303-530-6100 Covidien.com/ValleylabExchange
trademarks of Covidien AG. Other brands are trademarks of a Covidien company. Boulder, Colorado 800-255-8522
©2015 Covidien 8.15 US140649(2) PT00008291 ref#177509 80301