The document outlines calculations to determine the amount of hydrochloric acid (HCL) needed for regeneration of an acidic cation exchanger. It specifies that 30 kg of 100% HCL is initially required, and calculates that with an acid injection rate of 1.2 m3/hr over 0.5 hrs into a final solution of 600 kg, 30.57 kg of HCL at a concentration of 5% is needed in the final solution. Based on the initial and final requirements, 101.9 kg of 100% HCL is calculated to be the total quantity required.
The document outlines calculations to determine the amount of hydrochloric acid (HCL) needed for regeneration of an acidic cation exchanger. It specifies that 30 kg of 100% HCL is initially required, and calculates that with an acid injection rate of 1.2 m3/hr over 0.5 hrs into a final solution of 600 kg, 30.57 kg of HCL at a concentration of 5% is needed in the final solution. Based on the initial and final requirements, 101.9 kg of 100% HCL is calculated to be the total quantity required.
The document outlines calculations to determine the amount of hydrochloric acid (HCL) needed for regeneration of an acidic cation exchanger. It specifies that 30 kg of 100% HCL is initially required, and calculates that with an acid injection rate of 1.2 m3/hr over 0.5 hrs into a final solution of 600 kg, 30.57 kg of HCL at a concentration of 5% is needed in the final solution. Based on the initial and final requirements, 101.9 kg of 100% HCL is calculated to be the total quantity required.
The document outlines calculations to determine the amount of hydrochloric acid (HCL) needed for regeneration of an acidic cation exchanger. It specifies that 30 kg of 100% HCL is initially required, and calculates that with an acid injection rate of 1.2 m3/hr over 0.5 hrs into a final solution of 600 kg, 30.57 kg of HCL at a concentration of 5% is needed in the final solution. Based on the initial and final requirements, 101.9 kg of 100% HCL is calculated to be the total quantity required.
HCL quantity required for acidic cation exchanger 30 kg 100 %
Acid regeneration tank volume 150L 0.165831
Concentration of HCL 5 % Final solution 600 kg
acid injection rate 1.2 m3/hr
time 0.5 hrs volume 600 L density of 5% HCL 1.019 kg/L weight 611.4 kg
Now HCL available 30 %
Water in in the solution 70 HCL in solution 30 final solution concentration 5 % final solution quantity required 611.4 kg HCL in final solution 30.57 kg Initial quantity required 101.9 kg Water to be added to the initial quantity 509.5 kg Page No 16 From DM plant PID From DM plant PID , SAC