Professional Documents
Culture Documents
Setting Up Altitude Events
Setting Up Altitude Events
Setting Up Altitude Events
Tracking Modes
Back to home
Altitude events is a setting that can be enable to alert ight followers when an aircraft descends or climbs too quick based on the climb / decent
threshold setup under the aircraft settings.
2. Click 'Manage' on the organisations page, selecting the organisation the Spider is located under.
3. From within your organisation settings pages, click 'Aircraft Settings' on the left-hand menu.
https://support.spidertracks.com/knowledge/rate-of-altitude-change-events 1/3
2020/2/2 Setting Up Altitude Events
5. Scroll down the page to where the Spider is registered and select Enable Altitude Events
7. Click Save
Notes:
Altitude events must be turned on for both rates or off for both rates.
If you require one to be on but not the other, we recommend setting the rate high so that it is unlikely to be triggered.
On clicking 'Save' the rate of climb or descent con guration message will be sent to the Spider. It may take a few minutes of the Spider being turned
on and in clear view of the sky, for the message to be updated.
If you would like to receive an email or SMS when the Spider exceeds the rate of climb or descent, please this article on
how to set up Noti cation Messages.
https://support.spidertracks.com/knowledge/rate-of-altitude-change-events 2/3
2020/2/2 Setting Up Altitude Events
https://support.spidertracks.com/knowledge/rate-of-altitude-change-events 3/3