Heading Point Change Is Enabled Under Aircraft Settings

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

2020/2/2 Heading Change Point

Knowledge Base Login to Spidertracks Contact Us

Tracking Modes

Back to home

Heading Change Point


Heading Point Change is enabled under Aircraft Settings.

A Heading Change position point will be sent to the website when the Spider passes through the change of direction setting.

The Spider records the last heading that was sent, and when the heading changes more than the amount speci ed under Aircraft Settings on the
website it will send a new position report.

How To Setup Heading Points

1. Select the 'Admin' cog in app.spidertracks.io

2. Click 'Manage' on the organisations page

https://support.spidertracks.com/knowledge/heading-change-point 1/3
2020/2/2 Heading Change Point

3. From within your organisation settings pages, click 'Aircraft Settings' on the left-hand menu.

4. Select the Aircraft you would like to enable the speed transition for.

5. Put a tick in the box that enables the Heading Change Point setting

6. Check the Heading Change degrees

7. Click Save

Please Note: The angle limits are between 30º and 90º.

For further assistance setting up Spidertxt please email us at support@spidertracks.com

Was this article helpful? Yes No

https://support.spidertracks.com/knowledge/heading-change-point 2/3
2020/2/2 Heading Change Point

Knowledge Base Login to Spidertracks Contact Us

https://support.spidertracks.com/knowledge/heading-change-point 3/3

You might also like