Professional Documents
Culture Documents
A663c0 - Pantera Di6400 Spec
A663c0 - Pantera Di6400 Spec
significantly improved fuel efficiency and optimised delivery of Transport weight 35,700 kg (78,700 lbs)
power on demand compared with other DTH solutions. Transport width 2.995 m (9’10”)
Pipe diameter range 89–140 mm (3½–5½”) Engine output 399 kW@1,800 rpm
Maximum rotation torque 5,000 Nm Compressor air delivery 28 m3/min (1,000 cfm)
Chain feed module LF2025 with hose reel Fuel saving system Standard
Voltage 24V DC
Pressurization Standard
Ground clearance 400 mm Hole alignment and depth measurement Sandvik TIMi 6300
SILVER – Rock Solid Performance TIMi hole alignment and depth measurement system
Water pump
Hydraulic rotation head with shock absorber Water flushing system
1,850 l water tank
Travelling hose reel
12 pcs working lights
Feed module Ground support Lighting system
Lighting in engine compartment
Thread greasing system for pipes
Reversing alarm and flashing beacon
Bit basket
Independent electric horn
Retaining centralizer
Safety Hand fire extinguisher
Pipe handling system Linear pipe magazine
Hand rails and ladders
Uncoupling device
EU safety devices
Single section boom
Other features Pressure washer with hose and reel
Hydraulic oil and multiple tanks
Painted in standard Sandvik colours
Central lubrication system SANDVIK
Delivery and documen-
2 sets of manuals
Fast fill connections (fuel/coolant/oils/water) tation
1 set of CD-ROMs (ToolMan)
Crawler base and 2-speed traction motors
drill frame Disengagement track drive hubs
Guides for track chains
GOLD – Automation and Communication
3-bar track plates
Including all SILVER scheme features
Oscillation +/-10°
Automatic boom and feed positioning
Cummins QSX15 engine (Tier 2)
Automatic feed alignment
Double stage Sullair air compressor
TIM3D navigation via GPS*)
Powerpack Hydraulic pumps
3D Wireless Drill plan transfer into TIM3D via GSM or USB
Air receiver restriction alarm
SanRemo Platinum (GSM or Satellite)
Cooling system (+50…-5°C)
Data collection (USB)
Engine/compressor clutch system
Sandvik Sustainability 12 months service fee free of charge for Drill plan transfer and
Intelligent cooling management SanRemo
Package
ELS pumps Readyness for TeleRC operation (line of sight)
Lubrication device for DTH-hammer
Hydraulic system
Monitoring system for hammer lubrication system
PLATINUM – AutoMine® Tele remote control
Pneumatic system
Including all GOLD scheme features
Electrical system
Single drill tele remote control (line-of-sight) for all functions
Single hole Automation
On-board kit and remote operation station
Sandvik Integrated Control Architecture (SICA)
Not included: vehicle, hosting the remote operation station
DPi control system interface
Control system Flushing control system
POWERPACK
Health monitoring via USB
Troubleshooting via cabin display Cumming QSX15 engine Tier 4*
12.94 m
Weight 35,700 kg (78,700 lbs)
3.95 m
3.6 m
Width 2,995 m (9’10”)
A. Height 4.6 m (15’11”)
12.8 m
TS2-115:01/ENG © Sandvik Mining 2012 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
DISTRIBUTOR: