Professional Documents
Culture Documents
NE1 20 EM ABE DRW UBA (C) 00501 01HTF Electrical Building Weather Platform Drawing
NE1 20 EM ABE DRW UBA (C) 00501 01HTF Electrical Building Weather Platform Drawing
4. This drawing shall be read in conjuntion with all relevant architectural & Civil drawings and
technical specifications. In case of discrepancy between civil works and other drawings, the
Contractor shall refer to the Engineer to define the order of applicability.
6. Material quality:
Structural Steel (profiles and plates) Hot-rolled steel ASTM A572 Gr 50
Hollow structural steel ASTM A500 Gr B
10. The grating shall support a minimun live load of 5 kN/m2 with 2 meters of spam.
11. Connections not specified on this drawing shall be designed and supplied by the fabricator
according to the actual loads provided by Abengoa. These connections shall be included in the shop
drawings.
12. The center line of horizontal bracings shall be connected to center line of profile with less depth.
13. Prior to beginning any shop manufacturing task, detail design of connections and any change in
steel profiles proposed by the manufacturer must be provided in a 3D model compatible with
PDMS in order to Abengoa verification that no clashes with other elements appear.
14. All connections will be fixed except for those specified on drawing.
15. At the end of hollow steel profiles will be placed a sealed plate of 8 mm.
16. For avoidance of interferences, the supplier must provide a 3D model including final detail design of
all connections for ABG verification and approval prior to initiate manufacturing. Any change over
the indicated steel profiles must be informed to ABG for approval.
17. Grating shall be rated to support a live load of 5 KN/m2 with 1.0m spam.
Grating, handrails and ladders shall comply with the requirements described in the document
"NE1-03-EM-ABE-DRW-UZA(C)-00001 Typical stairs and ladders".
Abbreviations:
Weather platform location
T/BP Top of baseplate
Stakeout point
Pinned connection
CV CV
CV CV
CV CV
EPC Contractor:
4. This drawing shall be read in conjuntion with all relevant architectural & Civil drawings and
technical specifications. In case of discrepancy between civil works and other drawings, the
Contractor shall refer to the Engineer to define the order of applicability.
6. Material quality:
900 Structural Steel (profiles and plates) Hot-rolled steel ASTM A572 Gr 50
Hollow structural steel ASTM A500 Gr B
1150
W150*18 900 Technical Specification.
.2
*3 MC150*24.3
6.2 8. For steel structures connections to earthing network see drawing
600
7
2*
6. NE1-00-EM-EAI-DRW-BXE(E)-40100 Typical Erection Details Earthing Network.
S7
HS
W150*18 W150*18
MC150*24.3 9. Erection tolerances shall be in accordance with AISC 303-16.
100 100 10. The grating shall support a minimun live load of 5 kN/m2 with 2 meters of spam.
MC150*24.3
MC150*24.3
100
11. Connections not specified on this drawing shall be designed and supplied by the fabricator
W150*18
MC150*24.3
according to the actual loads provided by Abengoa. These connections shall be included in the shop
2250
drawings.
12. The center line of horizontal bracings shall be connected to center line of profile with less depth.
HS
.2
W150*18
1599
1599
*3
200 200
S7
6.2
6.2
13. Prior to beginning any shop manufacturing task, detail design of connections and any change in
*7
W150*18
W150*18
*7
6.2
steel profiles proposed by the manufacturer must be provided in a 3D model compatible with
6.2
1,200
S7
*3
HS PDMS in order to Abengoa verification that no clashes with other elements appear.
.2
14. All connections will be fixed except for those specified on drawing.
3d view 15. At the end of hollow steel profiles will be placed a sealed plate of 8 mm.
th
N/S
Nor
16. For avoidance of interferences, the supplier must provide a 3D model including final detail design of
W150*18
all connections for ABG verification and approval prior to initiate manufacturing. Any change over
the indicated steel profiles must be informed to ABG for approval.
17. Grating shall be rated to support a live load of 5 KN/m2 with 1.0m spam.
Grating, handrails and ladders shall comply with the requirements described in the document
"NE1-03-EM-ABE-DRW-UZA(C)-00001 Typical stairs and ladders".
1115 500 1115
TOC Column TOC Column
Abbreviations:
2730
T/BP Top of baseplate
1232
1232
North
Pinned connection
966 966 966 966
References:
45°
45°
45°
45°
Plate 1 Plate 1 Plate 1 Plate 1
Plate 3 Plate 3 NE1-00-EM-EAI-TSP-YM_(M)-27700 Painting Technical Specification
.2
.2
HS
HS
*3
*3
792
792
S7
S7
.2
.2
6
6
NE1-00-EM-EAI-PLN-YC_(C)-00200 CT&PT,Civil Project Criteria
76
76
.2
.2
HSS76.2*76.2*3.2
HSS76.2*76.2*3.2
200 200 200 200
*
*
2*
2*
76
76
6.
6.
.2
.2
S7
S7
*
*
3.
3.
NE1-00-EM-EAI-TSP-YC_(C)-00600 Steel Structure Specification
HS
HS
2
2
NE1-00-EM-EAI-DRW-BXE(E)-40100 Typical Erection Details Earthing Network
Plate 2 Plate 2 Plate 2 Plate 2
NE1-03-EM-ABE-DRW-UZA(C)-00001 Typical stairs and ladders
534
Leyend NE1-20-EM-ABE-DRW-UBA(C)-00201 HTF Electrical Building Structure drawing
Handrail
Ladder
1309
150 600 1650 1650
Plate 1 Plate 1 Plate 1
W150*18 W150*18
HSS76.2*76.2*3.2
HSS76.2*76.2*3.2
HSS76.2*76.2*3.2
45°
45°
Plate 3 Plate 3
792
792
North
Issue Signature Signature Signature Signature
*3
6.
2* Rev. Edition Description:
.2
.2
*3
6.
.2
HS
534
EPC Contractor:
Plate 2 Plate 2
1389
Contractor shall refer to the Engineer to define the order of applicability.
Plate
5. All works shall conform to the Steel Structure Technical Specifications
NE1-00-EM-EAI-TSP-YC_(C)-00600.
70
200 200
6. Material quality:
180
Structural Steel (profiles and plates) Hot-rolled steel ASTM A572 Gr 50
Concrete
15 Hollow structural steel ASTM A500 Gr B
A A'
B
W150*18 7. Structure protection shall be according to document NE1-00-EM-EAI-TSP-YM_(M)-27700 Painting
Plate 3 Plate 3 Technical Specification.
40
370
8. For steel structures connections to earthing network see drawing
NE1-00-EM-EAI-DRW-BXE(E)-40100 Typical Erection Details Earthing Network.
300
1246
15
W150*18 Concrete
Anchor bolt 9. Erection tolerances shall be in accordance with AISC 303-16.
115
310
180 M20
Plate 10. The grating shall support a minimun live load of 5 kN/m2 with 2 meters of spam.
310
Plate 2 Plate 2 11. Connections not specified on this drawing shall be designed and supplied by the fabricator
according to the actual loads provided by Abengoa. These connections shall be included in the shop
Holes Ø 22 Concrete
drawings.
115
W150*18 12. The center line of horizontal bracings shall be connected to center line of profile with less depth.
200 200
13. Prior to beginning any shop manufacturing task, detail design of connections and any change in
40
steel profiles proposed by the manufacturer must be provided in a 3D model compatible with
PDMS in order to Abengoa verification that no clashes with other elements appear.
Plate
40 100 40 View A-A' Post-installed anchor bolts Hilti type HIT RE 500-SD
Scale 1:5 14. All connections will be fixed except for those specified on drawing.
+ HAS will be used, M20 in top base plates and
B'
300 mm embedment, 370 mm of total length
View B-B' 15. At the end of hollow steel profiles will be placed a sealed plate of 8 mm.
Plates. South view Front view
Scale 1:5
Anchor bolt detail 16. For avoidance of interferences, the supplier must provide a 3D model including final detail design of
Scale 1:25 all connections for ABG verification and approval prior to initiate manufacturing. Any change over
Scale 1:5 Scale 1:5
the indicated steel profiles must be informed to ABG for approval.
17. Grating shall be rated to support a live load of 5 KN/m2 with 1.0m spam.
Grating, handrails and ladders shall comply with the requirements described in the document
"NE1-03-EM-ABE-DRW-UZA(C)-00001 Typical stairs and ladders".
Abbreviations:
Pinned connection
150 150 Plate
140
B
A A' References:
70
Concrete NE1-00-EM-EAI-DRW-YC_(C)-00100 Civil General Notes, Symbols and Materials
15
30
NE1-00-EM-EAI-TSP-YC_(C)-00450 Civilworks Technical Specification
220
Plate 1 Plate 1
HSS76.2*76.2*3.2
792
150
M12
15
Concrete NE1-00-EM-EAI-PLN-YC_(C)-00200 CT&PT,Civil Project Criteria
Plate 2 Plate 2
240
180
140 NE1-00-EM-EAI-TSP-YC_(C)-00600 Steel Structure Specification
240
Holes Ø 14 Plate Concrete
NE1-00-EM-EAI-DRW-BXE(E)-40100 Typical Erection Details Earthing Network
150 150
HSS76.2*76.2*3.2
NE1-03-EM-ABE-DRW-UZA(C)-00001 Typical stairs and ladders
30
260 Plate
A A'
B
Concrete
15
W150*18
70
1309
40
120
150
120
160
370
15
Concrete
300
W150*18 260
Plate 1 Plate Anchor bolt
400
M20
400
792
View A-A'
Scale 1:5 EPC Contractor:
40 180 40
B'