Professional Documents
Culture Documents
Loctite Maintenance, Repair & Overhaul: Solutions Guide & Product Selector
Loctite Maintenance, Repair & Overhaul: Solutions Guide & Product Selector
Committed to Innovation........................................................................................... 5
Threadlocking...................................................................................................... 6–9
Gasketing......................................................................................................... 14–17
Retaining.......................................................................................................... 18–21
Bonding............................................................................................................ 26–27
Loctite MRO catalogue is to be used as a guide for your applications. Henkel Australia advises that the use of
TDS’s should be considered before final choice.
3
Always at work.
Performance –
built in.
Over 50 years of continuous innovation has put strength and reliability into everything that carries
the Loctite® brand. Design engineers around the world rely on Loctite® threadlockers, thread sealants,
retaining compounds and gasketing materials to provide solutions to some of industry’s biggest
challenges. Henkel is dedicated to helping customers use Loctite® adhesives to reduce assembly costs,
enhance product designs, and increase the reliability of manufacturing process.
Loctite® is always at work in partnering with customers on multiple levels right from design stage to
manufacturing and in-field servicing. To learn more about how you can take advantage of the advanced
strength and reliability of Loctite® engineering adhesives, contact your local Loctite® representative on
1300 88 555 6 or visit www.iLoctite.com/performance
CommITTEd.To.InnoVATIon
From its founding in 1953, based on the world’s first Threadlockers and Thread Sealants
anaerobic product that cured in the absence of air, Introducing the BEST EVER
Loctite® has achieved success through innovation. Loctite® 243 and Loctite® 263.
An unrelenting commitment to continuous Formulated to deliver best
research and development has resulted in the performance on active and passive
most technically advanced range of industrial metals, increased oil tolerance
maintenance products available today. Products and improved high-temperature
that increase equipment reliability, reduce costs and performance.
improve quality throughout industry. Also available is a new range of
Here are some of our newest innovations featured innovative High Temperature Loctite Threadlockers;
throughout this catalogue; Loctite® 2422 Medium Strength & 2620 High
Strength High Temperature Threadlockers;
Loctite® 5770 High Temperature Thread Sealant,
specially developed for high temperature
Loctite® Sticks
applications / settings.
The quality and performance Same Loctite Reliability – now, we’ve made them
you trust in a new and more even better!
convenient semi-solid stick
formula.
Loctite® freeze & Release
These patented new stick
products offer greater flexibility The solution for releasing seized or
for tougher applications, corroded parts – SHOCK FREEZE.
especially overhead, under or around machinery, Loctite® Freeze & Release instantly
and on components that can not be moved. They’re chills seized and rusted parts (bolts,
compact, making them easy to carry from job to job nuts, studs). The exceptional shock-
and easy to store in a tool box, tool belt or pocket. freeze effect causes microscopic
The semi-solid formula means that they won’t spill or cracks in the layer of rust, allowing
leak. Now available in an expanded range including the lubricating ingredient to wick directly into the
two threadlockers, a pipe sealant, an anti-seize and rust by capillary action. The assembly can be easily
primer. dismantled after allowing 1-2 minutes reaction time.
Loctite® Reliability with a twist! Released parts remain lubricated and protected from
corrosion. (Refer to page 25 for more details).
5
Threadlocking
Threadlocking
Invented as a revolutionary method to lock and seal threaded fasteners, Loctite® brand anaerobic
threadlockers have found wide acceptance in a range of applications – from delicate electronic
components to heavy construction equipment. Loctite® brand threadlockers are available in varying
viscosities and strengths for virtually any application, including exposure to extreme environments.
air air
Cure
Chemical reaction
7
Prior to assembly After assembly
Threadlocking
Product Selector
Overhead
Use on all metals Use on all Metals
Applications
Product Description Loctite® 222 Loctite® 2422 Loctite® 243 Loctite® 248
NEW NEW
Recommended for low Very high temperature, High performance on Medium strength semi-solid
strength threadlocking of medium strength various metals, even without stick applicator ideal for
adjusting screws, counter threadlocker. Locks and use of a primer. Improved hard to reach applications.
sunk head screws and set seals threaded fasteners reliability in high temperature Recommended for fastener
screws; on collars, pulleys, in applications that require applications and on oil applications where removal
tool holders, and controllers. continuous temperature contaminated surfaces. is required.
resistance of up to 350°C
1 3/8” Steel Nut & Bolt, degreased, cured at 22°C for 72 hours and pre-torqued to 5Nm
2 Prevailing Torque measured at 180°C
Threadlocking
Not Assembled Assembled
Loctite® 263 Loctite® 268 Loctite® 2620 Loctite® 272 Loctite® 277 Loctite® 290
NEW NEW
High performance on High strength semi-solid Very high temperature, High temperature Very high strength Recommended for
various metals, even stick applicator ideal for high strength threadlocker with threadlocker with locking pre-assembled
without use of a primer. hard to reach places. threadlocker. Locks outstanding chemical outstanding chemical fasteners such as
Improved reliability Recommended for and seals threaded resistance. Suitable for resistance. Suitable for instrument screws,
in high temperature heavy duty applications fasteners in applications sealing most refrigerants. sealing most refrigerants. electrical connectors and
applications and on oil such as transmission that require continuous set screws.
contaminated surfaces. bolts and construction temperature resistance
equipment. of up to 350ºC.
9
Thread Sealing
Thread.Sealing
Loctite® brand liquid thread sealants seal and secure metal pipes and fittings, filling the space between
threaded metal parts and curing to prevent leakage. Designed for low and high pressure applications,
liquid thread sealants seal instantly for low pressure testing. When fully cured, they seal to the burst
strength of most piping systems.
11
Thread Sealing
Product Selector
1 Are the pipe threads metal or plastic? Plastic (or Metal & Plastic)
3 Will operating pressure exceed 300kPa? Yes (Above 300kPa) No (Below 300kPa)
Faster, more versatile pipe sealant Recommended for use on low Recommended for fine threaded
which out-dates traditional tapes pressure threaded plastic or fittings as used in hydraulic and
and hemp/pastes combinations. plastic/metal fittings carrying hot or pneumatic applications.
Provides an instant seal and allows cold water. Approvals
back-off to align fittings. Approvals • AGA Certificate 3375 to
Approvals • German DVGW No 96.07e125 1050kPa (Gas)
• Plumbing Safety License (Gas & Potable Water)
AS/NZS 4020:2002 Cert No. • German KTW (Potable Water)
8638 (Potable Water) • WRC approved to 85ºC
• AGA Certificate 6007 to 2400kPa (Potable Water)
(Gas).
Thread.Sealing
Metal Only
Steam/Hydraulic/
Pneumatic General Use
Pneumatic
Yes
Loctite® 542 Loctite® 561 Loctite® 577 Loctite® 567 PSTTM Loctite® 5770
NEW
Recommended for threaded Semi-solid stick formula Recommended for all coarse Recommended for all coarse High temperature thread
fittings as used in hydraulic offers added convenience metal threads. Suitable metal threads where slow cure sealant, designed to seal
and pneumatic installations. and portability. Formulated for applications at low is required to prolong time threaded pipe fittings in
Approvals for fast, reliable curing on temperatures requiring fast frame for adjusting valves and applications requiring
• German DVGW No metal, tapered pipe threads cure. fittings. continuous heat resistance of
96.02e125 (Gas & Potable and fittings. Provides high Approvals Approvals up to 280ºC.
Water) pressure sealing at operating • Plumbing Safety License AS/ • AGA Certificate 3207 to
temperatures up to 150ºC. NZS 4020:2002 Cert No. 1050kPa (Gas)
• BS 6956 Type A (Gas)
• WRC approved to 85ºC 20079 (Potable Water)
(Potable Water) • AGA Certificate 4787 to
2600kPa (Gas)
13
Gasketing
Gasketing
Loctite® brand Anaerobic and Silicone gasketing solutions are suitable for small and large gap flange
assemblies. Formed-in-place, they can be applied to any shape and offer improved seal reliability
compared to traditional pre-cut compression gaskets.
Anaerobic Gaskets
Loctite® brand anaerobic gaskets remain liquid when
exposed to air, but cure when confined between
mating flanges. Anaerobic gasketing products are best
suited for small gap applications and rigid metal-to-
metal assemblies.
Silicone Sealants
Loctite® brand silicone gasketing materials include
unique products with excellent fluid and high
temperature resistance. They are best suited for large
gap applications and stamped metal assemblies where
flange flexing occurs.
Product Selector
5 Unique Features Use with Shims Easy Disassembly High Chemical Resistance
Recommended for coating and Recommended for use on rigid Recommended for use on
re-using gaskets to improve iron, steel and aluminium flanges rigid metal parts e.g. cast
sealing. e.g. aluminium gearbox and iron components and pump
Approvals engine castings, etc. housings, etc. operating at high
• AGA certificate 2590 to 690kPa temperatures.
(Gas) Approvals
• AGA certificate 2590 to 690kPa
(Gas)
Gasketing
Up to 6.0mm (Silicone Sealants)
Metal or Non-Metals
Designed for high torque Replacement for cork and Recommended for sealing Single component RTV Recommended for sealing all
applications. Remains paper cut gaskets on flanges all types of flanges including non-sag silicone paste for of flanges including stamped
flexible and withstands high and stamped sheet metal stamped sheet metal where low volatility applications. sheet metal where high
vibration. Outstanding oil covers. Recommended for high flexibility and high oil Adheres to metal, glass, temperature resistance is
and shop fluid resistance. use where high vibration or water glycol resistance natural and synthetic fibres, required, e.g. assembly and
Non-corrosive, low odour. or flexing occurs. Can also is required. Oxygen sensor wood, ceramics, and many repair of industrial furnaces,
be used with plastic parts. safe. plastic substrates. Oxygen ovens, boilers, exhaust
Oxygen sensor safe. sensor safe. stacks and high temperature
ducting.
17
Retaining
Retaining
Accepted as a standard method for assembling press and slip parts, Loctite® anaerobic retaining
compounds fill the ‘inner space’ between components and cure to form a strong precision assembly.
Formulated in a wide variety of viscosities, gap fills, flexibility and strength characteristics, Loctite®
anaerobic retaining compounds are suitable for a broad range of industrial maintenance applications.
Product Selector
Yes No
Quick Cure Very High Temperature High Lubricity Repairs Worn Parts
Gives best resistance to Recommended for high Has lubricating properties to Used for repairing worn coaxial
dynamic, axial and radial loads. temperature retaining of parts with facilitate smooth assembly of parts without re-machining.
Recommended for retaining a clearance or interference fit, e.g. heavy interference or high torque Enables reuse of worn bearing
shafts, gears, pulleys, and similar retaining bushes, bearings, seals, fits. Prevents galling and metal seats, keys, splines, tapers, or for
cylindrical parts. fans and liners. pick-up during assembly. retaining shims.
Approvals
• Plumbing Safety License
4020:2002 Cert No. 8687
(Potable Water) 21
Anti-Seize Lubricants
Loctite® brand Anti-Seize compounds are a range of premium quality products, developed to protect
metal parts from corrosion, galling and seizing. They ease assembly and disassembly of slip fit and
threaded joints, and reduce friction and wear. Formulated for severe environments, these products
protect against high temperatures up to 1315ºC, in conjunction with heavy loads and chemical
corrosion.
23
Anti-Seize Lubricants
Product Selector
Heavy Duty, temperature Exclusive formula suspends Copper Free formulation with
resistant, petroleum based copper and graphite in a high extreme chemical resistance,
lubricant compound fortified with quality grease. Protects metal recommended for stainless steel
graphite and metal flake. Inert, parts from rust, corrosion, galling and other metal fittings. Prevents
will not evaporate or harden in and seizing at temperatures to corrosion, seizing and galling in
extreme cold or heat. For use in 982ºC. harsh chemical environments at
assemblies up to 870ºC. Recommended.for: temperatures to 760ºC.
Recommended.for: • Nuts, bolts and studs. Recommended.for:
• General purpose machine and • Fittings and shafts, machine • Chemical plants and oil
bolt assembly. surfaces. refineries.
• Close tolerance assembly • Fittings on steam turbines, • Water and sewage plants.
• Fine threads and snug slip fits. pumps and valves. • Environments where a ‘clean’
• Flanges, extruders and dies. inert lubricant is needed.
Lubricants
Stainless Steel &
Soft Metal Applications Incidental Food Contact Silicone Lubricant Penetrant
Titanium Applications
High Corrosion
Metal Free Metal Free Water & Steam Resistant Shock Freeze
Resistance
Loctite® heavy Loctite® Zinc Loctite® food Loctite® Silicone Loctite® freeze &
duty Anti-Seize Anti-Seize Grade Anti-Seize Lubricant Release
tal tal
Me ee Me ee
Fr Fr
Metal free formulation provides Smooth mixture of zinc dust Metal free formulation provides Non-curing silicone paste that Shock-freezes seized
outstanding lubrication to all and petrolatum grease that acts high levels of purity and seals, lubricates, protects, and rusted parts, causing
metals including stainless steel, like an ‘internal galvaniser’ for excellent lubricating properties waterproofs, and electrically microscopic cracks in the rust
aluminum and soft metals up to superior protection of aluminum for use on equipments with insulates metal, rubber, and and allowing the lubricant to
1315ºC. and ferrous surfaces from incidental food contact at plastic parts. Will not tarnish penetrate. The assembly can be
Recommended.for: seizure and corrosion up to temperatures up to 400ºC. paint, rubber or plastic surfaces. easily dismantled after allowing
• OEM specified turbine studs 400ºC. Recommended.for: Recommended.for: 1-2 minutes and parts remain
and bolts. Recommended.for: • Lubricating and protecting • Plug or ball valve, valve lubricated and protected from
• Protecting aluminum, parts in food processing stem packing and protecting corrosion.
• Ethylene and acetylene piping.
aluminum alloy, and ferrous plants, breweries, packaging electrical contacts. Recommended.for:
• Petrochemical plants.
metal from seizing and plants and hospitals. • Stopping leaks. • Seized and or rusted
• Environments prohibiting the
corrosion. components.
use of copper.
25
Bonding
Easy Application
# Grit blasted steel cured for 24 hours at 22ºC. * Applied @ 22ºC / 50% relative humidity.
Loctite® Control
Gel
Product Description
Bonds Most Plastics No Run Formula High Peel Strength Multi-Purpose 1 Hour Full Cure Electrical Insulator
Loctite® 406 Loctite® 454 Loctite® 480 Loctite® 330 Loctite® 3801 Loctite® 3805
Multi-Bond Kit
General purpose General purpose gel for Black rubber toughened This multi-purpose Conventional dual syringe, Fast setting, two
adhesive for difficult top bonding metals, composite grade for bonding metal to adhesive suits most two-part epoxy. Ideal component adhesive and
bond surfaces. Bonds materials, wood, cork, metal and metal to rubber; bonding needs including for emergency repairs or filler system, ideal for
Santoprene® rubbers, foam, leather, card, paper, especially suitable with metal bonding, ID plates where fast cure time is repairs, filling, bonding to
polyolefin plastics and plaster and unglazed applications where high and signage. Two part, required. Sets in 5 minutes. iron steel brass, bronze,
elastomers when used in ceramics. Recommended peel strength is required no mix, fast curing and Resistant to a wide range aluminum and copper.
conjunction with Loctite® for use on vertical or and/or shock loads are toughened with good of chemicals and solvents, Can be drilled, tapped,
770 Polyolefin Primer. overhead surfaces. Fills present. moisture, impact resistance and acts as an excellent threaded or filed and is
Also available in higher gaps to 0.5mm with the and peel strength. (50ml electrical insulator. an excellent electrical
viscosity grade, Loctite® use of Primer 7452. kit includes 7387 Activator insulator. Typically used
25gm). under speedy sleeves.
401 25ml (40124–25) 100ml
(33531) and 500ml (33532).
27
Primers & Activators
Active Surfaces Brass, copper, bronze, iron, soft steel What type of product are you
(Primer optional) 2 using?
Anaerobic (Threa
Solution 7649
Description Primer
Base Solvent Acetone
Drying Time at 20ºC 30 to 70 secs
On-Part Life 30 days
Size (Part Number) 100ml pump (22410A)
3.78ltr can (24063A)
Loctite® Control
Gel
Loctite® 7471 Loctite® 7088 Loctite® 7452 Loctite® 770 Loctite® 7387
NEW
Use to increase the cure Handy primer in stick Applied after adhesive to Helps to provide strong Required to initiate the cure
speed of Loctite® brand format, solvent free, no spill speed cure of Loctite® brand reliable bonds with Loctite® of Loctite® brand toughened
anaerobic products, especially formula. Ideal for overhead cyanoacrylate adhesives. brand cyanoacrylates on acrylic adhesives.
at low temperatures, in applications and where the Typical applications include “impossible” substrates like
applications with passive use of flammable primers is securing wires to coils or polypropylene, polyethylene,
metals or inert surfaces, or restricted. PCB’s and tamper-proofing PTFE and thermoplastic
where large gaps are involved. adjustments and mounting rubber.
edge guides or stiffeners.
29
Rust Treatment & Cleaning
✓ Effective rust converter formula for surface 1 What is your task? Rust Treatment
preparation of all metals
✓ Fast acting and non-corrosive gasket remover
eliminates need for scraping and sanding
2 What are you cleaning?
Solution 754
Appearance Milky Liquid
Temperature Range Up to 121ºC
Dry Time 30 min
KB Values #
-
Size (Part Number) 946ml bottle (75430)
3.78ltr bottle (75448)
# Kauri-Butanol Values tested to ASTM D 1133. (Determines relative solvent power of hydro
Loctite® 754
Product Description Extend® Rust Treatment
Positional image only
Pre-moistened waterless
Rapid Removal Non-Corrosive Biodegradable Effective on all Stains
towels
Minimises Flange
ODC Free Non-Toxic Conditions Skin Leaves no residues
Damage
Loctite® 790 Loctite® 7070 Loctite® natural Blue® Loctite® Yuk-off® Loctite® hand wipes
Chisel Gasket Remover ODC Free Cleaner & Degreaser
®
Cleaner & Degreaser Orange Hand Cleaner Waterless towels
Removes gaskets from any General purpose parts cleaner A biodegradable, all- Contains premium-grade Premoistened with a powerful
type of assembly in 10 to 15 and degreaser which contains purpose, industrial strength, cleansing agents that quickly cleaning formula, the abrasive,
minutes. Prepares metal parts no ozone depleting chemicals. concentrated cleaner and dissolve dirt, grease, resin, ink, yet non-scratching fabric
for new gaskets, eliminating Prepares surface for bonding degreaser, Natural Blue® paint, glue, tile cements and removes tar, grease, wax,
scraping and sanding. Suitable and is non-corrosive and contains no hazardous other stubborn stains. Citrus- ink, paint, lubricants and
for wood and is non-corrosive plastic compatible. Removes solvents. Formulated for wipe based, smooth formula is PH adhesives.
to aluminium. Not for use with grease, oil and dirt from down, pressure spraying balanced and fortified with
plastics, linoleum or synthetic electrical parts, tools, and immersion cleaning skin conditioners lanolin, aloe
fibres. bearings, controls, and processes, Natural Blue® can vera, Vitamin E, jojoba and
precision equipment. be economically diluted with wheat germ extract to soothe
water at room temperature and protect raw, rough hands.
or heated, to meet a wide
range of industrial cleaning
applications. ODC free, non
flammable, non-toxic and pine
scented. (709ml is diluted 1:1
ready for use). 31
Kit & Emergency Repairs
Loctite®
Product Description
Top Line Kit
Replace or Repair
Stop Pipe Leaks Repair Metal Surfaces
O-Ring Seals
Loctite® Core Products Water & Oil Resistant 30 Minute Cure 10 Minute Cure
Free Tool Box Permanent Replacement Cures Wet or Underwater Metal-Like Finish
Kit (MROKIT) Metric (16224) 1.8m kit (96321) 113gm stick (98853)
Imperial (10361)
Packaged in an easy-to-carry, Contains all of the materials Recommended for reliable, Easy to use, steel-filled
rugged and lockable toolbox. necessary to produce stationary temporary repairs of metal, plastic compound designed for
The kit conveniently packages an o-rings on the spot. Saves time and composite pipes. Easy to emergency maintenance repairs
assortment of popular Loctite® by allowing o-ring replacement use - no tools are required and on damp, dry or underwater
solutions for every MRO need. without disassembling machinery. can be applied to odd shapes as surfaces. Cures to a metal-like
Eliminates the need for inventory required. Cures in 30 minutes and finish in less than 10 minutes
of different sized o-rings. can be sanded or painted. under typical temperatures of
-30ºC to + 121ºC
33
The Loctite® Maintenance Workshop
Hands on training to increase reliability & reduce costs
unexpected.downtime?
We.can.fix.that.
To.learn.more.call.1300.88.555.6
Every time your equipment goes down, or After just two hours of training, your staff will be
springs a leak, your profits do too. There’s no on the shop floor applying the skills they’ve just
more compelling reason to enroll your staff in the learned - Immediately and with confidence.
Loctite® Maintenance Workshop. • Practical hands on training
• Reduce downtime • Product application technique
• Reduce costs • Customized content - aimed at trouble shooting,
• Increase reliability eliminating key problems within your plant
• Reclaim worn parts • Conducted at your facility
• SAVE MONEY!
By Rick Skibba
Henkel Corporation, Rocky Hill, CT
B olts, studs, set screws and other threaded fasteners Compatibility Chart - pg 42 & 43).
are the “ties that bond” industrial equipment
together. Considering that fastener loosening is a Threadlockers.hold.better. In test on transverse
leading cause of catastrophic failure in machinery, shock and vibration machines, liquid threadlockers
maintaining proper clamping forces is an important drastically outperformed mechanical devices (see
element in fastening effectiveness. graph). Bolts secured with threadlocker retained nearly
all their clamping force after more than 1,000 cycles.
Liquid anaerobic threadlockers are an excellent method Mechanical devices began to fail almost immediately.
of keeping fasteners firmly in place. Listed here are ten
points that plant personnel should know about using Better.performance.cost.less. Mechanical
liquid anaerobic threadlockers: locking methods are effective
to some degree, but are
It’s.not.just.a.bolt. The real Clampload Retention Comparison difficult to justify based on
function of nuts and bolts is to 100
Bolt with
cost. A special nut or washer
provide clamping force to hold threadlocker can cost more than four time
two components together. If 80 and nut
as much as an application of
Compound %
that clamping force decreases, Bolt with elastic liquid threadlocker. Mechanical
60 stop nut
the fastener begins to slip, devices also require extensive
and failure become inevitable. Bolt with tooth lock and costly inventories to
40 washer and nut
keep the range of sizes on
Thread.space.is.the. 20
Bolt with split ring
lock washer and nut
hand. Three or four grades of
enemy. There can be threadlocker – easy to carry
as little as 15% metal-to-
Unassisted bolt and colour-coded, serve the
0 and nut
metal contact between the 0 200 400 600 800 1000 same purpose.
thread of a nut and bolt. The Number of load cycles
It.will.come.out. All
empty space leaves room In test on transverse shock and vibration machines,threadlocked fasteners can
for movement that leads to liquid threadlockers drastically outperformed
mechanical locking devices be disassembled. Different
self-loosening and loss of
grades of threadlockers can
clamping force.
be used depending on the
job. Fasteners secured with low and medium strength
Side.movement.causes.failure. Fasteners work grades can be removed with common hand tools.
loose for complex reasons, but a key cause is sideways Those secured with high strength grades can be
movement. Bolted surfaces can slide sideways as a removed by applying heat for a specified time. (Refer to
result of thermal expansion, bending of the assembly, High Strength Disassembly guide - pg 38)
impact or vibration. As this happens, the bolt takes
on a rocking motion that causes the threads to wear Threadlockers.ease.assembly.and.
against each other. In time, the bolt becomes almost disassembly. The thixotropic property of Loctite®
frictionless, and the threads can unwind. anaerobics is conducive when applied to threads of
fasteners and fittings: they become less viscous when
Threadlockers.stop.all.kinds.of.movement. put under stress (being shaken, stirred or dispensed)
Liquid anaerobic threadlockers attack the root cause and return to their original state when stress is removed.
of loosening by filling spaces between the threads.
When wet, threadlockers lubricate fasteners, allowing
The result is a secure, one-piece assembly that will not
proper, consistent assembly tightening and torque.
loosen under stress.
When cured in place, threadlockers stop corrosion, thus
preventing seizure and allowing for ease in disassembly.
Sealing.stops.corrosion. By sealing between
thread spaces, threadlockers keep out air and moisture There.is.no.“downside”. Liquid threadlockers
that can cause corrosion – another common cause of are not just for certain specialized uses. They perform
fastener failure. Because of their chemical resistance, effectively on fasteners and threaded assemblies of any
threadlockers seal effectively in contact with most type and size, in any kind of equipment.
fluids, gases, and solvents used in industry. (Refer to Fluid 35
Technical References
Loctite® at Work
Loctite® Thread Sealant 5770 eliminates Saving Time & Money with Loctite®
leaks on Power Station’s steam fittings Anaerobic Gaskets
Situation: Problem:
A coal Power Station with one steam driven turbo With over 100 gear boxes on this steel company’s roll
generator, has a capacity of 150MW of electricity. line, maintenance is a costly expense. Replacement of
Steam fittings on the turbine intake were leaking due to shear pins is frequent, making disassembly a regular
incorrect sealing methods and high temperatures. The maintenance chore. The high vibration and heavy shock
fittings had been previously sealed with PTFE tape or loads experienced by the gear boxes loosen the bolts
sometimes even dry (without product), relying on rust which mount the housing. Cut gaskets were used to
to seal the threads, to prevent steam loss. seal the end bells, but leaks were a real problem.
The application can reach temperatures of 520°C, with Solution:
the nominal temperatures around the steam fittings
at 215°C and the main outlet of the secondary super Better able to withstand vibration, liquid gaskets
heater running at 300°C at 11MPa. provide a more precise and reliable seal than cut
In order to repair these leaks, the turbine has to be gaskets. Loctite® 515 Gasket Eliminator is now applied
shut down at significant cost to the Power Station to both front and rear bell housings of the gear boxes,
– with large reduction of electricity output to the replacing cut gaskets. Loctite® 515 Gasket Eliminator®
grid. Additionally, the coal mine which feeds the is a general purpose anaerobic sealant primarily used
beneficiated, dewatered tailings of the Power Station, for making flexible gaskets.
could be shut down. Results:
Solution: Using Loctite® 515 Gasket Eliminator instead of cut
Following a review of relevant processes, the Henkel gaskets provided many cost-cutting improvements for
Application Engineer recommended a Loctite® product our customer:
specifically designed for locking and sealing metal 1. N
o need to carry stock of pre-cut gaskets. Loctite®
threads on pipes and fittings in high temperature and Formed-in-Place Gaskets can be made to any size
high pressure applications – Loctite® 5770. or shape.
Prior to the application of the Loctite® 5770, Loctite®
2. D
owntime was significantly reduced due to fast
7471 was used to prime the stainless steel fittings. This
repair time. Loctite® 515 is easy to apply and cures
ensured correct surface preparation on the ‘inactive’
to a low pressure seal within 30 minutes
metal, enabling a fast fixturing & cure, to minimize
downtime. Loctite® 5770 is rated to a temperature of 3. C
ostly oil leakage and clean-up eliminated, saving
280°C based on a pressure of 6.6MPa and once cured critical downtime and money.
the product fills the mating thread, resisting loosening,
shock, vibration, shrinkage and heat, offering a long
term reliable seal.
Results:
By using Loctite® 5770 on this assembly, the leaks
were completely eliminated. This prevented shutdown
not only of the turbine at the Power Station but also
the possible closure of the Coal mine, a saving of over
$10,000/hour.
The maintenance team has now realized the reliability
of Loctite® sealants over the traditional PTFE thread
sealing tapes.
Loctite® Formed-in-Place Gaskets
eliminate the expense of carrying
countless inventory of pre-cut gaskets
37
Technical References
Application Procedures
ThReAdLoCKinG
THROUGH HOLE (BOLTS AND NUTS)
Apply.here
1...Clean.all.threads.(bolt.and.nut).with.Loctite®.odC-Free.Cleaner.
&.degreaser..Allow.to.dry.
2...If.necessary,.spray.all.threads.with.Loctite®.Primer.(Refer.to.
Technical.data)..Allow.to.dry.
3...Select.the.proper.strength.Loctite®.Threadlocker.product.
4...Insert.bolt.into.through.hole.assembly.
5...Apply.several.drops.of.Threadlocker.onto.bolt.at.targeted.tightened.
nut.engagement.area..Avoid.touching.bottle.tip.to.metal.
not.here 6...Assemble.and.tighten.nut.as.usual.
PRE-ASSEMBLED FASTENERS
1...Clean.bolts.and.nuts.with.Loctite®.odC-Free.Cleaner.&.degreaser.
290.here
2...Assemble.components.
3...Tighten.nuts.
4...Apply.drops.of.Loctite®.290.Threadlocker.at.the.nut.and.bolt.
juncture.
5...Avoid.touching.bottle.tip.to.metal.
Note:..For.preventive.maintenance.on.existing.equipment:
RETIGhTEn.nuts.and.apply.Loctite®.290.Threadlocker.at.the.nut.
and.bolt.juncture.
not.here
1..Apply.localized.heat.to.nut.or.stud.(230°C.for.5.minutes).
2..disassemble.while.hoT.
Note:..use.standard.hand.tools.for.disassembly.of.low.and.medium.
strength.Threadlockers.
Localised.heating.methods
Application Procedures
Thread Sealing
STANDARD FITTINGS — PIPE, HYDRAULICS,
POTABLE WATER OR AIR
Loctite® Product Loctite® Product 1. Clean parts of contamination with ODC-Free Cleaner & Degreaser.
If necessary, spray Loctite® Primer (Refer to Technical Data) onto
threaded parts (male and female). Allow to dry..
Note: Primer is not required for brass parts.
2. Apply a band of Loctite Product to male threads starting one to two
threads from end of pipe.
3. Assemble parts snugly. Do not overtighten.
4. If initial pressure exceeds 6.9 MPa*, wait 30 minutes before
pressurizing.
Note:
• If sealing chemicals or strong acids/bases, refer to Fluid
Compatibility Chart (pg 42-43).
• Do not use on oxygen or strong oxidisers (chlorine)..
• Refer to Loctite® Thread Sealing selector Chart (pg 12-13) for correct
product selection
*Depending on conditions
ORIGINAL
1. Clean all parts with Loctite® ODC-Free Cleaner & Degreaser.
2. Spray all parts (I.D. and O.D.) with Loctite® Primer (Refer Technical
Data).
3. Apply Loctite® 641 dabs around shaft at engagement area. (Refer to
Technical Data for Gap Fill)
4. Assemble parts as normal.
Bearing
5. Wipe off excess.
6. Allow 20 minutes cure time prior to service.
WORN SHAFT
Follow directions above except:
bearing mount 641 OR 1. Determine radial gap.
QUICK METAL 660 2. If radial gap exceeds 0.1mm, Loctite® Primer must be used.
3. Take steps to maintain concentricity with large gaps.
Shaft 4. Larger gaps require longer cure times (30-60 minutes).
5. Loctite® Quick Metal® 660 is NOT recommended for radial gaps
exceeding 0.5mm.
Note: Loctite® Quick Metal® 660 is very fast fixturing (30 seconds or
less) with Loctite® 7471 Primer (T).
39
Technical References
Application Procedures
foRMed–in–PLACe GASKeTinG
SEALING CAST RIGID FLANGES
1...Remove.old.gasketing.material.and.other.heavy.
contaminants.with.Loctite®.ChISEL®.Gasket.Remover..use.
mechanical.removal.technique.if.required.
....Note:.Avoid.grinding.
Continuous.Bead 2...Clean.both.flanges.with.Loctite®.odC-Free.Cleaner.&.
degreaser.
3...Spray.Loctite®.Primer.(Refer.Technical.data).on.only.one.
surface..Allow.to.dry.
4...Apply.a.continuous.bead.of.SELECTEd.LoCTITE®.
GASKETInG.PRoduCT.to.the.other.surface.
....Note:.Circle.all.bolt.holes.with.sealant,.if.appropriate.
5...mate.Parts..Assemble.and.tighten.as.required..Note:.
Immediate.assembly.not.required;.however.avoid.delays.
Circle.Bolt.holes
over.45.minutes.(assemble.immediately.if.primer.is.used).
6...Allow.to.cure:
Raised.Flange a..no.pressure.–.immediate.service
b..Low.pressure.(up.to.3.45mPa)..–.30.to.45.minutes
c..high.pressure.(3.45.to.17.2mPa)..–.4.hours
d..Extreme.high.pressure.(17.2.to.34.45mPa).–.24.hours
1...Remove.old.gasketing.material.and.other.heavy.
contaminants.with.Loctite®.ChISEL®.Gasket.Remover.
2...Clean.both.flanges.with.Loctite®.odC-Free.Cleaner.&.
degreaser.
3...Apply.a.continuous.bead.of.the.selected.Loctite®.mAXX®.
SILIConE.to.sealing.surface..Circle.all.bolt.holes.
....Note:
....•..use.proper.bead.diameter.to.seal.flange.width.and.
depth.
....•.minimize.excessive.material.“squeeze.in”.
4...Assemble.within.10.minutes.by.pressing.together..
Tighten.as.required.
5...Clean.up.any.excess.
6...Cure.times.will.vary.with.temperature,.humidity,.and.gap..
Refer to Loctite® do it Right users Guide for Typical.full.cure.time.is.24.hours.
further application procedures such as;
Threadlocking Gasket dressing
■ Sealing Flanges with Gasket
■ Blind Holes (Studs, etc)
■ Adjustment Screws Strengthen Keyed Assemblies
■ Stripped Thread Repair ■ Keyed Assemblies – Standard & Heavy Duty
■ Repair Badly Wallowed Keys
Thread Sealing
Shaft Mounted Components
■ Compression Fittings
■ Repair Badly Worn Shaft
■ Flared / Swaged Fittings
■ Slip Fit – Heavy Duty
■ Hose Ends – Air & Hydraulic ■ Press Fit
Puncture Sealing housed Components
■ Tanks, Vessels, etc ■ Slip Fit – Light & Heavy Duty
Porosity Sealing ■ Retaining (Large Gaps)
■ Porosity in Welds and Castings And More….
Agency Approvals
Australian Gas Association (AGA) Loctite® 609 Retaining Compound, Press Fit/General Purpose
Loctite® 620 Retaining Compound, Slip Fit/High Temperature
Loctite® 55 - Approval number 6007 to 2400 kPa
Loctite® 638 Retaining Compound, Slip Fit/Maximum Strength
Loctite® 510 - Approval number 2590 to 690 kPa
Loctite® 641 Retaining Compound, Controlled Strength
Loctite® 515 - Approval number 2590 to 690 kPa
Loctite® 567 - Approval number 3207 to 1050 kPa Loctite® 660 Quick Metal Retaining Compound, Press Fit Repair
Loctite® 569 - Approval number 3375 to 1050 kPa Loctite® 770 Primer
Loctite® 577 - Approval number 4787 to 2600 kPa Loctite® 5900 Flange Sealant, Heavy Body RTV Silicone
Loctite® 7649 Primer N
Loctite® C5-A® Copper Based Anti-Seize
Plumbing Safety License (AS/NZS 4020:2002)
Loctite® Extend® Rust Treatment
Loctite® 55 - Certificate 8638 Loctite® Form-A-Thread® Stripped Thread Repair Kit
Loctite® 577 - Certificate 20079 Loctite® No More Leaks, Plastic Pipe Sealant
Loctite® 680 - Certificate 8687
Loctite® O-Ring Making Kit
Loctite® Pipe Repair Kit
Australian Quarantine & Inspection Service (AQIS)
Loctite® Yuk-Off® Orange Hand Cleaner Canadian Food Inspection Agency (CFIA)
Loctite® Silver Grade Anti-Seize
Loctite® Superflex Red High Temp RTV, Silicone Adhesive Sealant
NSF International
Loctite® Thread Sealant with PTFE
Loctite® 55 Pipe Sealing Cord
Loctite® 248 Threadlocker, Medium Strength/Removable
Military Specifications (Mil Spec)
Loctite® 290 Threadlocker, Wicking Grade
Loctite® 480 Instant Adhesive, Black/Toughened Loctite® 277 Threadlocker, High Strength/Large Threads
Loctite® 518 Gasket EliminatorTM Flange Sealant Loctite® 290 Threadlocker, Wicking Grade
Loctite® 561 PSTTM Pipe Sealant Loctite® 609 Retaining Compound, Press Fit/General Purpose
Loctite® 587 Blue, High Performance RTV Silicone Gasket Maker Loctite® 635 Retaining Compound, Slip Fit/High Strength/Slow Cure
Loctite® 680 Retaining Compound, Slip Fit/High Strength Loctite® 640 Retaining Compound, Press Fit/Medium Strength/High
Temp.
Loctite® 5900 Flange Sealant, Heavy Body RTV Silicone
Loctite® 7452 Tak Pak Accelerator
Loctite® 7649 Primer N
Loctite® 7471 Primer T
Loctite® Food Grade Anti-Seize
Loctite® 7649 Primer N
Loctite® No More Leaks, Plastic Pipe Sealant
Loctite® C5-A® Copper Based Anti-Seize
Loctite® ODC-Free Cleaner & Degreaser
Loctite® Moly-50 Anti-Seize
Loctite® Silver Grade Anti-Seize
American Bureau of Shipping (ABS)
Loctite® 454 Instant Adhesive, Surface Insensitive Gel Military Specifications (Commercial Item Standard)
Loctite® 567 PSTTM Thread Sealant, High Temperature
Loctite® 406 Instant Adhesive, Surface Insensitive
Loctite® 587 Blue, High Performance RTV Silicone Gasket Maker
Loctite® 620 Retaining Compound, Slip Fit/High Temperature
UL Classified/Listed for U.S.
Loctite® 680 Retaining Comp., Slip Fit/High Strength
Loctite Extend Rust Treatment
® ® Loctite® 55 Pipe Sealing Cord
Loctite Nickel Anti-Seize
® Loctite® 271 Threadlocker, High Strength
Loctite Silver Grade Anti-Seize
® Loctite® 510 Gasket EliminatorTM Flange Sealant
Loctite® 515 Gasket EliminatorTM Flange Sealant
Canadian Food Inspection Agency (CFIA) Loctite® 561 PSTTM Pipe Sealant
Loctite® 567 PSTTM Thread Sealant, High Temperature
Loctite® 248 Threadlocker, Medium Strength/Removable
Loctite® 587 Blue, High Performance RTV Silicone Gasket Maker
Loctite® 268 Threadlocker, High Strength
Loctite® 272 Threadlocker, High Strength/High Temperature
ULC Classified for Canada
Loctite® 290 Threadlocker, Wicking Grade
Loctite® 330 Depend Adhesive, No Mix Loctite® 561 PSTTM Pipe Sealant
Loctite® 454 Prism Instant Adhesive, Surface Insensitive Gel Loctite® 567 PSTTM Thread Sealant, High Temperature
Arsenic Acid ................................. ● China Clay .................................... ● Ethyl Cellosolve § ........................ ● Hexane ......................................... ● Methyl Carbitol ............................ ●
LEGEND: Asbestos Slurry ........................... ● Chloral Alcoholate ........................ ● Ethyl Cellosolve Slurry § .............. ● Hydrazine ..................................... ● Methyl Cellosolve § ..................... ●
● All Loctite® Anaerobic Sealants Ash Slurry .................................... ● Chloramine .................................. ● Ethyl Formate .............................. ● Hydrazine Hydrate ....................... ● Methyl Chloride ........................... ●
are Compatible Including # Asphalt Emulsions ....................... ● Chlorinated Hydrocarbons ........... Ethyl Silicate ................................ Hydrobromic Acid ........................ ❑
● ● Methyl Ethyl Ketone...................... ●
243, 542, 567, 569, 577 Asphalt Molten ............................ ● Chlorinated Paperstock ............... ● Ethylene Diamine ......................... ● Hydrochloric Acid ........................ ● Methyl Isobutyl Ketone ................. ●
† Use Loctite® 277
Chlorinated Solvents..................... ● Ethylene Dibromide ..................... ● Hydrocyanic Acid ......................... ❑ Methyl Lactate ............................. ●
✖ Not Recommended
Bagasse Fibers ............................ ● Chlorinated Sulphuric Acids ........ ✖ Ethylene Dichloride ...................... ● Hydroflouric Acid ......................... ✖ Methyl Orange ............................. ●
❑ < 10% (same as ●)
Barium Acetate ............................ ● Chlorinated Wax ........................... ● Ethylene Glycol ............................ ● Hydrogen Peroxide (dil) ............... ● Methylamine ................................ ●
> 10% (same as †)
Barium Carbonate ........................ ● Chlorine Dioxide .......................... ✖ Ethylenediamine Tetramine .......... ● Hydrogen Peroxide (con) .............. † Methylene Chloride ...................... ●
✩ < 5% (same as ●)
> 5% (same as †) Barium Chloride ........................... ● Chlorine Liquid ............................ ✖ Hydroponic Sol ............................ ● Mineral Spirits ............................. ●
❖ Use Loctite® # 243, 290 Barium Hydroxide ........................ ❑ Chlorine (Dry) ............................... ✖ Fatty Acids ................................... ● Hydroquinone .............................. ● Mixed Acid, Nitric/Sulfuric ............ ✖
Barium Sulfate ............................. ● Chloroacetic Acid ......................... ❑ Fatty Acids Amine ........................ ● Hydroxyacetic Acid ...................... ● Monochloracetic Acid .................. ●
Abrasive Coolant .......................... ● Battery Acid .................................. ❑ Chlorobenzene (Dry) .................... ● Fatty Alcohol ................................. ● Hypo ............................................ ●
Morpholine ................................... ●
Acetaldehyde ............................... ● Battery Diffuser Juice .................. ● Chloroform (Dry) .......................... ● Ferric-Floc ................................... ● Hypochlorous Acid ....................... ●
Mud ............................................. ●
Acetate Solvents .......................... ● Bauxite (See Alumina) ................. ● Chloroformate Methyl .................. ● Ferric Chloride ............................. ●
Acetimide ..................................... ● Bentonite ..................................... ● Chlorosulfonic Acid ...................... ✖ Ferric Nitrate ............................... ● Ink ................................................ ●
Nalco Sol. .................................... ●
Acetic Acid .................................... ● Benzaldehyde .............................. ● Chrome Acid Cleaning ................. ❑ Ferric Sulfate ................................ ● Ink in Solvent-Printing ................. ●
Naphtha ....................................... ●
Acetic Acid .................................... ❑ Benzene ....................................... ● Chrome Liquor .............................. ❑ Ferrocence-Oil Sol ....................... ● Iodine in Alcohol .......................... ●
Acetic Acid - glacial...................... Benzene Hexachloride ................. ● Naphthalene ................................ ●
● Chrome Plating Bath ................... ❑ Ferrous Chloride .......................... ● Iodine-Potassium Iodide .............. ●
Acetic Anhydride .......................... ● Benzene in Hydrochloric Acid ...... ● Chromic Acid 10% ....................... ● Ferrous Oxalate ............................ ● Iodine Solutions ........................... ● Naval Stores Solvent ................... ●
Acetone ........................................ ● Benzoic Acid ................................ ● Chromic Acid 50% (cold) ............. ✖ Ferrous Sulfate10% ...................... ● Ion Exchange Service .................. ● Nematocide ................................. ●
Acetyl Chloride ............................ ● Benzotriazole ............................... ● Chromic Acid 50% (hot) ............... ✖ Ferrous Sulfate (Sat)..................... ● Ion Exclusion Glycol ..................... ● Neoprene Emulsion ..................... ●
Acetylene (Liquid Phase) ............. ● Beryllium Sulfate ......................... ● Chromium Acetate ....................... ● Fertilizer Sol ................................ ● Irish Moss Slurry ......................... ● Neoprene Latex ........................... ●
Acid Clay ...................................... ● Bicarbonate Liquor ...................... ● Chromium Chloride ...................... ● Flotation Concentrates ................. ● Iron Ore Taconite ......................... ● Nickel Acetate .............................. ●
Acrylic Acid .................................. ● Bilge Lines ................................... ● Chromium Sulfate ........................ ● Fluoride Salts .............................. ● Iron Oxide .................................... ● Nickel Ammonium Sulfate ............ ●
Acrylonitrile ................................. ● Bleach Liquor .............................. ● Classifier ...................................... ● Fluorine, Gaseous or Liquid .......... ● Isobutyl Alcohol ........................... ● Nickel Chloride ............................ ●
Activated Alumina ........................ ● Bleached Pulps ............................ ● Clay .............................................. ● Fluorolube .................................... ● Isobutyraldehyde ......................... ● Nickel Cyanide ............................. ●
Activated Carbon ......................... ● Borax § Liquors ........................... ● Coal Slurry ................................... ● Fluosilic Acid ............................... ● Isooctane ..................................... ● Nickel Fluoborate ........................ ●
Activated Silica ............................ ● Boric Acid .................................... ● Coal Tar ........................................ ● Flux Soldering .............................. ● Isopropyl Alcohol ......................... ● Nickel Ore Fines .......................... ●
Alcohol-Allyl ................................. ● Brake Fluids ................................. ● Cobalt Chloride ............................ ● Fly Ash Dry .................................. ● Isocyanate Resin ......................... ● Nickel Plating Bright .................... ●
Alcohol-Amyl ............................... ● Brine Chlorinated ......................... ● Copper Ammonium Formate ........ ● Foam Latex Mix ........................... ● Isopropyl Acetate ......................... ● Nickel Sulfate .............................. ●
Alcohol-Benzyl ............................. ● Brine (cold) .................................. ● Copper Chloride ........................... ● Foamite ........................................ ● Isopropyl Ether ............................ ● Nicotinic Acid ............................... ❑
Alcohol-Butyl ............................... ● Bromine Solution .......................... † Copper Cyanide ........................... ● Formaldehyde (cold) ..................... ● Itaconic Acid ................................ ● Nitrate Sol. ................................... ●
Alcohol-Ethyl ............................... ● Butadiene .................................... ● Copper Liquor .............................. ● Formaldehyde (hot) ....................... † Nitration Acid(s) ........................... ✖
Alcohol-Furfuryl ........................... ● Butyl Acetate ............................... ● Copper Naphthenate .................... ● Formic Acid (Dil cold) ................... ● Jet Fuels ...................................... ● Nitric Acid .................................... ✖
Alcohol-Hexyl ............................... ● Butyl Alcohol ................................ ● Copper Plating (Acid Process) ..... ● Formic Acid (Dil hot) ...................... † Jeweler's Rouge .......................... ● Nitric Acid10% ............................. ❑
Alcohol-lsopropyl ......................... ● Butyl Amine ................................. ● Copper Plating (Alk. Process) ...... ● Formic Acid (cold) ........................ ● Jig Table Slurry ............................ ● Nitric Acid 20% ............................. †
Alcohol-Methyl ............................. ● Butyl Cellosolve § ........................ ● Copper Sulfate ............................. ● Formic Acid (hot) .......................... † Nitric Acid Anhydrous .................. ✖
Alcohol-Propyl ............................. ● Butyl Chloride .............................. ● Core Oil ........................................ ● Freon § ......................................... † Kaolin-China Clay § ..................... ● Nitric Acid Fuming ....................... ✖
Alum-Ammonium ......................... ● Butyl Ether (Dry) .......................... ● Corundum .................................... ● Fuel Oil ........................................ ● Kelp Slurry ................................... ● Nitro Aryl Sulfonic Acid ................ ●
Alum-Chrome .............................. ● Butyl Lactate ............................... ● Creosote ...................................... ● Fuming Nitric Red ........................ ✖ Kerosene ...................................... ● Nitrobenezene-Dry ...................... ●
Alum-Potassium .......................... ● Butyral Resin ............................... ● Creosote-Cresylic Acid ................ ● Fuming Sulfuric ........................... ✖ Kerosene Chlorinated .................. ●
Nitrocellulose ............................... ●
Alum-Sodium ................................ ● Butyraldehyde .............................. ● Cyanide Solution .......................... ● Fuming Oleum ............................. ✖ Ketone ......................................... ●
Nitrofurane .................................. ●
Alumina......................................... ● Butyric Acid ................................. ❑ Cyanuric Chloride ........................ ● Furfural ........................................ ●
Nitroguanidine ............................. ●
Aluminium Acetate ...................... ● Cyclohexane ................................ ● Lacquer Thinner ........................... ●
Nitroparaffins-Dry ........................ ●
Aluminium Bicarbonate ............... ● Cadmium Chloride ....................... ● Cylinder Oils ................................ ● Gallic Acid .................................... ✩ Lactic Acid ................................... ●
Nitrosyl Chloride .......................... ●
Aluminium Bifluoride ................... ● Cadmium Plating Bath ................. ● Gallium Sulfate ............................ ● Lapping Compound ...................... ●
Aluminium Chloride ..................... Norite Carbon .............................. ●
● Cadmium Sulfate .......................... ● De-Ionized Water ......................... ● Gasoline-Acid Wash ..................... ● Latex-Natural ............................... ●
Aluminium Sulfate ....................... ● Calcium Acetate ........................... ● De-Ionized Water Low Gasoline-Alk. Wash ...................... ● Latex-Synthetic ........................... ● Nuchar ......................................... ●
Ammonia Anhydrous ................... ✖ Calcium Bisulfate ........................ ● Conductivity .............................. ● Gasoline Aviation ......................... ● Latex Synthetic Raw .................... ●
Ammonia Solutions ..................... ✖ Calcium Carbonate ...................... ● Detergents ................................... ● Gasoline Copper Chloride ............ ● Laundry Wash Water .................... ● Oakite § Compound ...................... ●
Ammonium Bisulfite .................... ● Calcium Chlorate ......................... ● Developer, photographic .............. ● Gasoline Ethyl .............................. ● Laundry Bleach ............................ ● Oil, Creosote ................................ ●
Ammonium Borate ....................... ● Calcium Chloride ......................... ● Dextrin ......................................... ● Gasoline Motor ............................ ● Laundry Blue ............................... ● Oil, Emulsified .............................. ●
Ammonium Bromide .................... ● Calcium Chloride Brine ................ ● Diacetone Alcohol ........................ ● Gasoline Sour .............................. ● Laundry Soda .............................. ● Oil, Fuel ........................................ ●
Ammonium Carbonate ................. ● Calcium Citrate ............................ ● Diammonium Phosphate .............. ● Gasoline White ............................. ● Lead Arsenate .............................. ● Oil, Lubricating ............................ ●
Ammonium Chloride .................... ● Calcium Ferrocyanide .................. ● Diamylamine ................................ ● Gluconic Acid ............................... ● Lead Oxide ................................... ● Oil, Soluble .................................. ●
Ammonium Chromate .................. ● Calcium Formate ......................... ● Diatomaceaus Earth Slurry .......... ● Glue-Animal Gelatin ..................... ● Lead Sulfate ................................ ● Oleic Acid (hot) ............................ ●
Ammonium Fluoride .................... ● Calcium Hydroxide ....................... ● Diazo Acetate ............................... ● Glue-Plywood .............................. ● Lignin Extract .............................. ● Oleic Acid (cold) ........................... ●
Ammonium Fluorosilicate ............ ● Calcium Lactate ........................... ● Dibutyl Phthalate ......................... ● Glutamic Acid .............................. ● Lime Slaked ................................. ● Ore Fines-Flotation ...................... ●
Ammonium Formate .................... ● Calcium Nitrate ............................ ● Dichlorophenol ............................. ● Glycerine Lye-Brine ..................... ✖ Lime Sulfur Mix ........................... ● Ore Pulp ....................................... ●
Ammonium Hydroxide ................. ✖ Calcium Phosphate ...................... ● Dichloro Ethyl Ether ..................... ● Glycerol ........................................ ● Liquid Ion Exchange .................... ● Organic Dyes ............................... ●
Ammonium Hyposulfite ............... ● Calcium Silicate ........................... ● Dicyandamide .............................. ● Glycine ......................................... ● Lithium Chloride .......................... ● Oxalic Acid (cold) ......................... ●
Ammonium Iodide ....................... ● Calcium Sulfamate ...................... ● Dielectric Fluid ............................ ● Glycine Hydrochloride................... ● LOX (Liquid 02) ............................. ✖ Ozone (wet) ................................. ✖
Ammonium Molybdate ................ ● Calcium Sulfate ........................... ● Diester Lubricants ....................... ● Glycol Amine ................................ ● Ludox ........................................... ●
Ammonium Nitrate ...................... ● Calcium Sulfite ............................ ● Diethyl Ether Dry ......................... ● Glycolic Acid ................................ ● Lye ............................................... ✖ Paint-Linseed Base....................... ●
Ammonium Oxalate ..................... ● Camphor ...................................... ● Diethyl Sulfate ............................. ● Glyoxal ......................................... ● Paint-Water Base ......................... ●
Ammonium Persulfate ................. ● Carbitol ........................................ ● Diethylamine ................................ ● Gold Chloride ............................... ● Machine Coating Color ................ ● Paint-Remover-Sol. Type ............. ●
Ammonium Phosphate ................ ● Carbolic Acid (phenol) ................. ❑ Diethylene Glycol ......................... ● Gold Cyanide ................................ ● Magnesite Slurry ......................... ● Paint-Vehicles .............................. ●
Ammonium Picrate ...................... ● Carbon Bisulfide .......................... ● Diglycolic Acid ............................. ● Granodine .................................... ● Magnesite .................................... ● Palmitic Acid ................................ ●
Ammonium Sulfate ...................... ● Carbon Black ............................... ● Dimethyl Formamide ................... ● Grape Pomace Graphite ................ ● Magnesium Bisulfite .................... ● Paper Board Mill Waste ............... ●
Ammonium Sulfate Scrubber ...... ● Carbon Tetrachloride ................... ● Dimethyl Sulfoxide........................ ● Grease Lubricating ...................... ● Magnesium Carbonate ................ ●
Paper Coating Slurry .................... ●
Ammonium Sulfide ...................... ● Carbonic Acid .............................. ❑ Dioxane Dry ................................. ● Green Soap .................................. ● Magnesium Chloride .................... ●
Paper Pulp ................................... ●
Ammonium Thiocyanate .............. ● Carbowax § .................................. ● Dioxidene ..................................... ● Grinding Lubricant ....................... ● Magnesium Hydroxide ................. ●
Paper Pulp with Amun. ................ ●
Amyl Acetate ............................... ● Carboxymethyl Cellulose ............. ● Dipentene-Pinene ......................... ● Grit Steel ...................................... ● Magnesium Sulfate....................... ●
Paper Pulp with Dye .................... ●
Amyl Amine ................................. ● Carnauba Wax ............................. ● Diphenyl ....................................... ● Gritty Water .................................. ● Maleic Acid .................................. ●
Paper Pulp, bleached ................... ●
Amyl Chloride .............................. ● Casein .......................................... ● Distilled Water (Industrial) ........... ● Groundwood Stock ...................... ● Maleic Anhydride ......................... ●
Paper Pulp, bleached-washed ..... ●
Aniline .......................................... ● Casein Water Paint ...................... ● Dowtherm § ................................. ● GRS Latex .................................... ● Manganese Chloride ..................... ●
Aniline Dyes ................................. ● Celite ........................................... ● Drying Oil ..................................... ● Gum Paste ................................... ● Manganese Sulfate....................... ● Paper Pulp Chlorinated ................. ●
Anodizing Bath ............................ ● Cellosolve § ................................. ● Dust-Flue (Dry) ............................ ● Gum Turpentine ........................... ● Melamine Resin ........................... ● Paper Groundwood ...................... ●
Antichlor Solution ........................ ● Cellulose Pulp .............................. ● Dye Liquors................................... ● Gypsum ........................................ ● Menthol ........................................ ● Paper Rag .................................... ●
Antimony Acid Salts .................... ● Cellulose Xanthate ....................... ● Mercaptans .................................. ● Paper Stocks, Fine ....................... ●
Antimony Oxide ........................... ● Cement Dry/Air Blown ................. ● Emery-Slurry ............................... ● Halane Sol ................................... ● Mercuric Chloride ........................ ● Paradichlorobenezene ................. ●
Antioxidant Gasoline .................... ● Cement Grout .............................. ● Emulsified Oils ............................. ● Halogen Tin Plating ...................... ● Mercuric Nitrate .......................... ● Paraffin Molten ............................ ●
Aqua Regia .................................. ✖ Cement Slurry .............................. ● Enamel Frit Slip ........................... ● Halowax § .................................... ● Mercury ....................................... ● Paraffin Oil ................................... ●
Argon ........................................... ● Ceramic Enamel .......................... ● Esters General ............................. ● Harvel-Trans 0il ........................... ● Mercury Dry ................................. ● Paraformaldehyde ....................... ●
Armeen § ..................................... ● Ceric Oxide .................................. ● Ethyl Acetate ................................ ● Heptane ....................................... ● Methane ....................................... ● Pectin Solution Acid .................... ●
Arochlor § .................................... ● Chalk ............................................ ● Ethyl Alcohol ................................ ● Hexachlorobenzene ..................... ● Methyl Alcohol ............................. ● Pentachlorethane ........................ ●
Aromatic Gasoline ........................ ● Chemical Pulp .............................. ● Ethyl Amine .................................. ● Hexadiene .................................... ● Methyl Acetate ............................. ● PentaerythritoI Sol. ...................... ●
Aromatic Solvents ....................... ● Chestnut Tanning ......................... ● Ethyl Bromide .............................. ● Hexamethylene Tetramine ........... ● Methyl Bromide ........................... ● Perchlorethylene (Dry) .................. ●
Fluid Compatability Chart
Perchloric Acid ............................. ❑ Potassium Permanganate ............ ● Sodium Benzene Sulfonate .......... ● Sulfathiazole . ............................... ● Udylite Bath-Nickel . ..................... ● Acetylene . ..................................... ●
Perchloromethyl Mercaptan ......... ● Potassium Persulfate ................... ● Sodium Bichromate . .................... ● Sulfite Liquor ................................ ● Undecylenic Acid .......................... ● Acid & Alkali Vapors ...................... ●
Permanganic Acid ........................ ✖ Potassium Phosphate . ................. ● Sodium Bisulfite ........................... ● Sulfite Stock ................................. ● Unichrome Sol. Alk. ...................... ● Air .................................................. ●
Persulfuric Acid ............................ ✖ Potassium Silicate . ...................... ● Sodium Bromide . ......................... ● Sulfonated Oils ............................. ● Uranium Salts . ............................. ● Amine ............................................ ●
Petroleum Ether ........................... ● Potassium Sulfate ........................ ● Sodium Carbonate . ...................... ● Sulfones ....................................... ● Ammonia ....................................... ●
Uranyl Nitrate ............................... ●
Petroleum Jelly ............................ ● Potassium Xanthate ..................... ● Sodium Chlorate . ......................... ● Sulfonic Acids . ............................. ●
Press Board Waste ....................... Uranyl Sulfate . ............................. ●
Phenol Formaldehyde Resins . ..... ● ● Sodium Chlorite . .......................... ● Sulfonyl Chloride .......................... ● Butane ........................................... ●
Phenol Sulfonic Acid .................... ● Propionic Acid .............................. ● Sodium Cyanide ........................... ● Sulfur Slurry ................................. ● Urea Ammonia Liquor . ................. ●
Butadiene Gas/Liquid .................... ●
Phenolic Glue ............................... ● Propyl Alcohol . ............................. ● Sodium Ferricyanide .................... ● Sulfur Solution . ............................ ● Butylene Gas/Liquid ...................... ●
Phloroglucinol . ............................. ● Propyl Bromide . ........................... ● Sodium Formate . ......................... ● in Carbon Disulfide . ................... ● Vacuum to 100 Micron ................. ● By-Product Gas (Dry) . ................... ●
Phosphate Ester ........................... ● Propylene Glycol . ......................... ● Sodium Glutamate . ...................... ● Sulphuric Acid 0-7% ..................... † Vacuum below 100 Micron . ......... ●
Phosphatic Sand .......................... ● Pumice ......................................... ● Sodium Hydrogen Sulfate ............ ● Sulphuric Acid 7-40% ................... † Vacuum Oil ................................... ● Carbon Dioxide .............................. ●
Phosphoric Acid 85% (hot) ........... ✖ Pyranol ......................................... ● Sodium Hydrosulfite ..................... ● Sulphuric Acid 40-75% ................. † Vanadium Pentoxide . ................... ● Carbon Disulfide ............................ ●
Phosphoric Acid 85% (cold) .......... † Pyridine ........................................ ● Sodium Hydrosulfide .................... ● Sulphuric Acid 75-95% ................ ✖
Slurry . .......................................... ● Carbon Monoxide .......................... ●
Phosphoric Acid 50% (hot)............. † Pyrogallic Acid . ............................ ● Sodium Hydrochloride .................. ● Sulphuric Acid 95-100% .............. ✖
Varnish ......................................... ● Chloride (Dry) ................................ ●
Phosphoric Acid 50% (cold) .......... † Pyrogen Free Water . .................... ● Sodium Hydroxide ........................ ✖ Sulphurous Acid ............................ †
Varsol-Naphtha Solv. .................... ● Chlorine (Dry) ................................ ✖
Phosphoric Acid 10% (cold) ......... ● Pyrole ........................................... ● Sodium Hydro. 20% (cold) . .......... ● Sulfuryl Chloride . ......................... ●
Versene § ..................................... ● Chlorine (Wet) . .............................. ✖
Phosphoric Acid 10% (hot) ............ † Pyromellitic Acid . ......................... ● Sodium Hydro. 20% (hot) .............. † Surfactants ................................... ●
Vinyl Acetate Dry or Coke-Oven Gas (Cold) . .................. ●
Phosphorous Molten .................... ● Sodium Hydro. 50% (cold) . ........... † Synthetic Latex . ........................... ●
Phosphotungstic Acid.................... ● Quebracho Tannin . ....................... ● Sodium Hydro. 50% (hot) ............. ✖ Coke-Oven Gas (Hot) ...................... †
Chloride Monomer . .................... ●
Photographic Sol. ......................... ● Sodium Hydro. 70% (cold) . ........... † Taconite-Fines .............................. ● Cyanogen Chloride ........................ ●
VinyI Chloride Latex Emul ............. ●
Phthalic Acid . ............................... ● Rag Stock Bleached...................... ● Sodium Hydro. 70% (hot) ............. ✖ Talc-Slurry .................................... ● Cyanogen Gas ............................... ●
Vinyl Resin Slurry ......................... ●
Phytate ......................................... ● Rare Earth Salts ........................... ● Sodium Hypochlorite .................... ● Tankage-Slurry ............................. ●
Viscose ......................................... ● Ethane ........................................... ●
Phytate Salts ................................ ● Rayon Acid Water ......................... ● Sodium Lignosulfonate . ............... ● Tannic Acid (cold) .......................... †
Vortex-Hydroclone......................... ● Ether-see Diethyl Ether ................. ●
Pickling Acid, Sulfuric .................. ● Rayon Spin Bath . ......................... ● Sodium Metasilicate . ................... ● Tamin . .......................................... ●
Picric Acid Solutions . ................... ● Rayon Spin Bath spent ................. ● Sodium Molten ............................. ● Tar & Tar Oil .................................. ● Ethylene . ....................................... ●
Pine Oil Finish .............................. ● Resorcinol .................................... ● Sodium Nitrate ............................. ● Tartaric Acid ................................. ● Water-Acid – Below pH7............... ● Ethylene Oxide . ............................. ●
Plating Sol. as follows: River Water.................................... ● Sodium Nitrite-Nitrate................... ● Television Chemicals .................... ● Water pH7 to 8 ............................. ●
Brass Cyanide .......................... ● Road Oil ........................................ ● Sodium Perborate . ....................... ● Tergitol § ...................................... ● Water Alkaline – Over pH8 ........... ● Freon § (11-12-21-22) ................... †
Bronze-Cyanide ....................... ● Roccal . ......................................... ● Sodium Peroxide .......................... ✖ Terpineol . ..................................... ● Water Mine Water . ....................... ● Furnace Gas (Cold) ......................... †
Chromium & Cadmium ............ ● Rosin-Wood................................... ● Sodium Persulfate ........................ ● Tetraethyl Lead . ........................... ● Water Potable................................ ❖ Furnace Gas (Hot) . ........................ ●
Cyanide .................................... ● Rosin in Alcohol . .......................... ● Sodium Phosphate-Mono ............. ● Tetrahydrofuran ............................ ● Water River . ................................. ●
Cobalt Acid . ............................. ● Rosin Size . ................................... ● Sodium Phosphate-Tri .................. ● Tetranitromethane ........................ ● Gas Drip Oil ................................... ●
Water Sandy ................................. ●
Copper Acid . ............................ ● Rubber Latex ................................ ● Sodium Potassium Chloride ......... ● Textile Dyeing ............................... ● Gas Flue ........................................ ●
Copper Alk. .............................. ● Sodium Salicylate . ....................... ● Textile Finishing Oil ...................... ● Water “White” – low pH ............... ●
Gas Manufacturing ........................ ●
Gold Cyanide ............................ ● Safrole........................................... ● Sodium Sesquicarbonate ............. ● Textile Printing Oil ........................ ● Water “White” – high pH .............. ●
Gas Natural . .................................. ●
Iron-Acid .................................. ● Salt Alkaline ................................. ● Sodium Silicate ............................ ● Thiocyanic Acid ............................ ● Wax . ............................................. ●
Lead-Fluoro . ............................ ● Salt Electrolytic ............................ ● Sodium Silcofluoride .................... ● Thioglycollic Acid ......................... ● Wax Chlorinated ........................... ● Helium ........................................... ●
Nickel Bright ............................ ● Salt Refrg. .................................... ● Sodium Stannate .......................... ● Thionyl Chloride ........................... ● Wax Emulsions ............................. ● Hydrogen Gas – Cold . ................... ●
Platinum . ................................. ● Sand-Air Blown Slurry . ................ ● Sodium Sulfate ............................. ● Thiophosphoryl Chloride .............. ● Weed Killer Dibromide . ................ ● Hydrogen Chloride . ....................... ●
Silver-Cyanide . ........................ ● Sand-Air Phosphatic . ................... ● Sodium Sulfide ............................. ● Thiourea ....................................... ● Weisberg Sulfate Plating .............. ● Hydrogen Cyanide ......................... ●
Tin-Acid . .................................. ● Sea Coal ....................................... ● Sodium Sulfite .............................. ● Thorium Nitrate ............................ ● Hydrogen Sulfide – Wet & Dry........ ●
Wood ground pulp ........................ ●
Tin Alk. Barrel .......................... ● Sea Water ..................................... ● Sodium Sulfhydrate . .................... ● Thymol . ........................................ ●
Wort Lines...................................... ●
Zinc Acid .................................. ● Selenium Chloride ........................ ● Sodium Thiocyanate ..................... ● Tin Tetrachlorida . ......................... ●
Isobutane........................................ ●
Zinc Alk. Cyanide ..................... ● Sequestrene ................................. ● Sodium Thiosulfate . ..................... ● Tinning Sol. DuPont ...................... ●
X-Ray Developing Bath . ............... ● Methane ........................................ ●
Polyacrylonitrile Slurry ................. ● Sewage . ....................................... ● Sodium Tungstate . ....................... ● Titania Paper Coating ................... ●
Methyl Chloride ............................. ●
Polypentek . .................................. ● Shellac . ........................................ ● Sodium Xanthate .......................... ● Titanium Oxide Slurry . ................. ● Xylene . ......................................... ●
Polysulfide Liquor . ....................... ● Shower Water ............................... ● Solox-Denat. Ethanol . .................. ● Titanium Oxy Sulfate .................... ●
Natural Gas – Dry .......................... ●
Polyvinyl Acetate Slurry ............... ● Silica Gel ...................................... ● Soluble Oil .................................... ● Titanium Sulfate ........................... ● Zelan . ........................................... ●
Polyvinyl Chloride ......................... ● Silica Ground ................................ ● Solvent Naphthas ......................... ● Titanium Tetrachloride . ................ ● Nitrogen Gas . ................................ ●
Zeolite Water ................................ ● Nitrous Oxide . ............................... ●
Porcelain Frit ................................ ● Silicone Tetrachloride ................... ● Sorbic Acid ................................... ● Toluol ............................................ ●
Zinc Acetate . ................................ ●
Potash .......................................... ❑ Silicone Fluids .............................. ● Sour Gasoline ............................... ● Toluene ......................................... ●
Zinc Bromide ................................ ● Oil-Solvent Vapor . ......................... ●
Potassium Acetate . ...................... ● Silver Cyanide .............................. ● Soybean Sludge-Acid ................... ● p-Toluene Sulfonic Acid . ............... †
Potassium Alum. Sulfate .............. ● Silver Iodide-Aqu. ......................... ● Spensol Solution .......................... ● Transil Oil . .................................... ● Zinc Chloride ................................ ● Oxygen .......................................... ✖
Potassium Bromide ...................... ● Silver Nitrate ................................ ● Stannic Chloride ........................... ● Trichloracetic Acid ........................ ● Zinc Cyanide-Alk. ......................... ● Ozone ............................................ ✖
Potassium Carbonate ................... ● Size Emulsion ............................... ● Starch ........................................... ● Trichlorethane 1,1,1 ..................... ● Zinc Fines Slurry .......................... ●
Potassium Chlorate ...................... ● Skelly Solve E, L ........................... ● Starch Base .................................. ● Trichlorethylene ............................ ● Zinc Flux Paste ............................. ● Producer Gas 50 PSI ..................... ●
Potassium Chloride Sol. ............... ● Slate to 400 Mesh ........................ ● Stearic Acid .................................. ● Trichlorethylene-Dry ..................... ● Zinc Galvanizing ........................... ● Propane ......................................... ●
Potassium Chromate .................... ● Soap Lye . ..................................... ✖ Steep Water .................................. ● Tricresyl Phosphate ...................... ● Zinc Hydrosulfite .......................... ● Propylene ...................................... ●
Potassium Cyanide Sol. . .............. ● Soap Solutions (Stearates) ........... ● Sterilization Steam ....................... ● Triethanolamine . .......................... ●
Zinc Oxide in Water....................... ●
Potassium Dichromate ................. ● Soap Stone Air Blown . ................. ● Stillage Distillers .......................... ● Triethylene Glycol ......................... ● Steam High Pressure (≤ 70 psi)..... ✖
Zinc Oxide in Oil ........................... ●
Potassium Ferricyanide . .............. ● Soda Pulp ..................................... ● Stoddard Solvent .......................... ● Trioxane ........................................ ● Steam Low Pressure (≤ 70 psi)...... ●
Potassium Hydroxide . .................. ✖ Sodium Acetate ............................ Styrene ......................................... ● Tungstic Acid ................................ ● Zinc Sulfate .................................. ●
● Sulfur Dioxide ................................ ●
Potassium Iodide .......................... ● Sodium Acid Fluoride ................... ● Styrene Butadiene Latex .............. ● Turpentine...................................... ● Zincolate . ..................................... ● Sulfur Dioxide Dry ......................... ●
Potassium Nitrate . ....................... ● Sodium Aluminate ........................ ● Sulfamic Acid ............................... ● Zirconyl Nitrate . ........................... ● Sulfur Trioxide Gas ........................ ✖
Potassium Perchlorate ................. ● Sodium Arsenate .......................... ● Sulfan-Sulfuric Anhydride ............ ● UCON § Lube ................................ ● Zirconyl Sulfate.............................. ● Sulfuric Acid Vapor ........................ ●
NOTE: 1. The above information does not constitute a recommendation of sealant use. It is intended only as a guide for consideration by the purchaser with the expectation of favorable confirming
test results. It is impossible to test sealant reaction with the multitude of chemicals in existence, therefore, compatibility has been estimated based on a wide variety of customer
experience.
2. With the stringent action of such chemicals as Freon §, strong cold acids and caustics, thorough evaluation is suggested. Sealing of hot corrosive chemicals is not recommended.
3. Contact Henkel Corporation for use with chemicals not covered by this information.
§ Listing(s) may be Brand Name(s) or Trademarks for chemicals of Corporations other than Henkel. Freon is a reg. trademark of E.I. DuPont de Numours, Co., Inc.
Loctite® product numbers in red are worldwide or application-specific products.
(This is a list of chemical stability only. It does not constitute approval for use in the processing of foods, drugs, cosmetics, pharmaceuticals, and ingestible chemicals.)
Loctite® sealants are not recommended for use in pure oxygen or chlorine environments or in conjunction with strong oxidising agents, an explosive reaction can result.
The data contained herein are furnished for information only and are believed CORPORATION SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR
to be reliable. We cannot assume responsibility for the results obtained by others INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST PROFITS. The discussion herein
over whose methods we have no control. It is the user’s responsibility to determine of various processes or compositions is not to be interpreted as a representation that
suitability for the user’s purpose of any production methods mentioned herein and they are free from domination of patents owned by others or as a license under any
to adopt such precautions as may be advisable for the protection of property and of henkel CORPORATION patents which may cover such processes or compositions. We
persons against any hazards that may be involved in the handling and use thereof. recommend that each prospective user test the proposed application to determine its
In light of the foregoing, HENKEL CORPORATION SPECIFICALLY DISCLAIMS suitability for the purposes intended prior to incorporation to determine its suitability
ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE for manufacturing process using this data as a guide. This product may be covered by 43
ARISING FROM SALE OR USE OF henkel CORPORATION’S PRODUCTS. henkel one or more United States or foreign patents or patent application.
henkel.–
Your.partner.worldwide
Product Literature
henkel.Australia.Pty..Ltd.
135-141 Canterbury Road,
Kilsyth, Victoria, 3137
Phone: 1300 88 555 6
www.loctite.com.au
henkel.new.Zealand.Ltd.
PO Box 58 493
Greenmount 1730
Auckland, New Zealand
Phone: (64) 09 272 6710
Orders Fax: (64) 09 272 6711
www.loctite.co.nz
The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the result obtained by others over whose methods we have no control. It is
the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and
persons against any hazards that may be involved in the handling and use thereof. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free
from patents owned by others or as a licence under any Henkel patents which may cover such processes or compositions. We recommend that each prospective user test his proposed application before
repetitive use, using this data as a guide.
Gasket EliminatorTM and PSTTM are trademarks, Loctite®, Chisel®, Maxx®, Yuk-Off®, and Natural Blue® Extend® are Registered Trade Marks of Henkel Corporation. ©Copyright 5/11, Henkel Australia Pty. Ltd.
All rights reserved. IDH1526541 ART0761F