Professional Documents
Culture Documents
Inspection and Tests Plan: OPGW 60mm, 24cores
Inspection and Tests Plan: OPGW 60mm, 24cores
Inspection and Tests Plan: OPGW 60mm, 24cores
: ITP1904-103
User / Customer : INDONESIA Page No. : 1 of 3
Project Title :-
Document Title :
3. Tensile strength IEC 61232 Min. 1346.15N/mm2 10% of wires on sampling drums
* Note) The tensile strength of individual wire after stranding shall be not less than 95% of the min. Tensile strength specified for before stranding (1417N/mm2)
according to LSGS-18-PO0135 (The 5% reduction accounts for handling and twisting of wires during stranding process)
4. Elongation at fracture IEC 61232 Min. 1.5% 10% of wires on sampling drums
5. Conductivity at 20℃ IEC 61232 Min. 20.3%IACS 10% of wires on sampling drums
6. Torsion test IEC 61232 Min. 20No. 10% of wires on sampling drums
7. Thickness of aluminum IEC 61232 Min. 0.126mm 10% of wires on sampling drums
3. Tensile strength IEC 60104 Min. 308.75N/mm2 10% of wires on sampling drums
* Note) The tensile strength of individual wire after stranding shall be not less than 95% of the min. Tensile strength specified for before stranding (325N/mm2)
according to LSGS-18-PO0135 (The 5% reduction accounts for handling and twisting of wires during stranding process)
4. Elongation at fracture IEC 60104 Min. 3.0% 10% of wires on sampling drums
5. Conductivity at 20℃ IEC 60104 Min. 52.5%IACS 10% of wires on sampling drums
6. Wrapping test IEC 60104 Not break 10% of wires on sampling drums
Ref. No. : ITP1904-103
Rev. No. : A
Page No. : 3 of 3
[Complete OPGW]
5. Outer stranding direction IEC 60794-4 Right-hand (Z) 10% of drums on shipments
7. D.C resistance at 20℃ IEC 60794-4 Max. 0.5Ω/km 10% of drums on shipments
8. Attenuation coefficient
[ITU-T G.652D]
10% of drums on shipments
- at 1310 ㎚ ITU-T G.652D Max. 0.34dB/km(Avg.) / 0.35dB/km(Indiv.)
(* 100% of fibers on sampling drums)
- at 1383 ㎚ Max. 0.31dB/km(Avg.) / 0.33dB/km(Indiv.)
- at 1550 ㎚ Max. 0.21dB/km(Avg.) / 0.23dB/km(Indiv.)