Professional Documents
Culture Documents
Draft EN 12057: Natural Stone Products - Modular Tiles - Requirements
Draft EN 12057: Natural Stone Products - Modular Tiles - Requirements
Draft EN 12057: Natural Stone Products - Modular Tiles - Requirements
EN 12057
Edition: 2012-03-01
Note:
Because of possible comments, the final version of this ÖNORM can
differ from the present Draft.
Please send your comments (in writing) by 2012-04-15 to Austrian
Standards Institute.
Like all member organizations of CEN, Austrian Standards Institute is basically obliged to implement Europe-
an Standards in Austria and to withdraw conflicting standards.
Austrian Standards Institute herewith submits this Draft of a European Standard as Draft ÖNORM to
public enquiry and information.
Please find below some practical instructions intended to offer you and the responsible committee assistance
for the processing of comments and proposals for modification:
Form For your comments/proposals for change, please use the relevant form
available from Internet. Download under
http://www.as-institute.at/en/standards/developing-standards/offer-
solutions/comments/
or use the Draft Standard Portal
http://www.as-institute.at/en/standards/draft-standard-portal/
Structure Please use a new line for each comment. This facilitates the attribution
of the comments received to the different clauses and chapters of the re-
spective Draft.
Aspects concerning patent law The recipients of this Draft ÖNORM are requested to add information on
any patent rights known to their comments and to provide supporting
documentation, if available.
AS+ Shop 14.12.2012
2
EUROPEAN STANDARD DRAFT
NORME EUROPÉENNE prEN 12057
EUROPÄISCHE NORM
January 2012
English Version
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 246.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12057:2012: E
worldwide for CEN national Members.
prEN 12057:2012 (E) ÖNORM DRAFT
Contents Page
Foreword ..............................................................................................................................................................3
1 Scope ......................................................................................................................................................5
2 Normative references ............................................................................................................................5
3 Terms and definitions ...........................................................................................................................6
4 Requirements .........................................................................................................................................6
5 Marking and packaging ...................................................................................................................... 12
6 Evaluation of conformity .................................................................................................................... 12
Annex A (informative) Sampling .................................................................................................................... 19
Annex B (informative) Example of quality manual and factory production control .................................. 23
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive (89/106/EEC) — Natural stone modular tiles for internal
flooring and stairs and for external flooring ....................................................................................... 34
Annex ZB (informative) Clauses of this European Standard addressing the provisions of the EU
Construction Products Directive (89/106/EEC) — Natural stone modular tiles for internal
wall and ceiling finishing and for external wall and ceiling finishing ................................................ 39
Bibliography ..................................................................................................................................................... 45
AS+ Shop 14.12.2012
2
ÖNORM DRAFT prEN 12057:2012 (E)
Foreword
This document (prEN 12057:2012) has been prepared by Technical Committee CEN/TC 246 “Natural stones”,
the secretariat of which is held by UNI.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
For relationship with EU Directive 89/106/EEC, see informative Annexes ZA and ZB, which are an integral
part of this document.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
This European Standard is one of a series of standards for specifications of natural stone products which
includes the following:
EN 12058, Natural stone products — Slabs for floors and stairs — Requirements;
EN 1341, Slabs of natural stone for external paving — Requirements and test methods
EN 1342, Setts of natural stone for external paving — Requirements and test methods
EN 1343, Kerbs of natural stone for external paving — Requirements and test methods
b) CEN/TC 128 — Roof covering products for discontinuous laying and products for wall cladding
EN 12326-1, Slate and stone products for discontinuous roofing and cladding — Part 1: Product
specification
AS+ Shop 14.12.2012
EN 12326-2, Slate and stone for discontinuous roofing and external cladding — Part 2: Methods of
test for slate and carbonate slate
3
prEN 12057:2012 (E) ÖNORM DRAFT
EN 771-6, Specification for masonry units — Part 6: Natural stone masonry units
Other standards are relevant to stone aggregates for concrete, roads, railways and armourstone (under study
within CEN/TC 154).
AS+ Shop 14.12.2012
4
ÖNORM DRAFT prEN 12057:2012 (E)
1 Scope
This document specifies requirements for flat modular tiles of natural stone which are made for use as
flooring, stairs, cladding and ceiling finishes. It does not cover mineral aggregates and artificial agglomerated
stone material and does not cover installation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 1925, Natural stone test methods — Determination of water absorption coefficient by capillarity
EN 1936, Natural stone test methods — Determination of real density and apparent density and of total and
open porosity
EN 12372, Natural stone test methods — Determination of flexural strength under concentrated load
EN 12524, Building materials and products — Hygrothermal properties - Tabulated design values
EN 13161, Natural stone test methods — Determination of flexural strength under constant moment
EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification using
data from reaction to fire tests
EN 13755, Natural stone test methods — Determination of water absorption at atmospheric pressure
EN 14066, Natural stone test methods — Determination of resistance to ageing by thermal shock
EN 14231, Natural stone test methods — Determination of the slip resistance by means of the pendulum
tester
EN ISO 12572, Hygrothermal performance of building materials and products — Determination of water
vapour transmission properties (ISO 12572)
AS+ Shop 14.12.2012
NOTE Besides the European Standards for test methods mentioned in this clause, there exist further standards
which can be used for scientific examinations, but which are not relevant for the application in practice according to this
standard.