Professional Documents
Culture Documents
Navitrak I Navigamma: Technical Data Sheet
Navitrak I Navigamma: Technical Data Sheet
NaviTrak I NaviGamma ® ®
Service Benefits
DAS
n Reliable MWD for real-time directional control
Inclinometer
n Log correlation and formation top identification & Azimuth
Operating Specifications and Limits Note: All Sensor accuracies are 2 Sigma confidence
1
Flow Rate Assumes typical magnetic field value at 30° latitude
2
4 3/4": 100 - 320 GPM (380 - 1,200 LPM) Accuracy applies to inclinations greater than 5°
6 3/4": 200 - 800 GPM (760 - 3,030 LPM)
8 1/4": 300 - 1,350 GPM (1,135 - 5,100 LPM)
9 1/2": 450 - 1,600 GPM (1,725 - 6,130 LPM)
Maximum Temperature Operating: 302°F (150°C)
Operating Time: Steering: 200 hrs
(pulse rate dependent) Rotating: 200 hrs +
Maximum Pressure: 20,000 psi (1,378 bar)
Pressure Drop: Depends on mud weight & flow rate & ID of collar
Maximum Overpull: N/A
Maximum WOB or compressive load: N/A
RPM: no restriction
Axial & Lateral Vibration: 5 g RMS (1 - 250 Hz; 1 sec integration) or
45 g peak (0.025 sec shock pulse)
(from recorded memory or flagged by real-time severity level)
Sand Content: Maximum 1 % Volume
LCM: Fine to medium Nut Plug
DLS w/ Slick-Collar Max. Rotating: Max. Sliding:
4 3/4": 7.0°/100ft 25.0°/100ft
6 3/4": 6.5°/100ft 12.5°/100ft
8 1/4": 4.5°/100ft 10.5°/100ft
9 1/2": 3.5°/100ft 7.0°/100ft
DLS w/ Flexible-Collar Max. Rotating: Max. Sliding:
4 3/4": 21.0°/100ft 82.0°/100ft
6 3/4": 9.5°/100ft 23.0/100ft
For BUR exceeding specs company advice is required
Toolface Update Rate: Wellsite-selectable
Gamma Update Rate: Wellsite-selectable
Full Survey Transmission: Wellsite-selectable
Raw data Transmission: Wellsite-selectable
Headquarters Baker Hughes INTEQ 2001 Rankin Road Houston, Texas 77073 713-625-4200 www.bakerhughes .com
© 2002 Baker Hughes Incorporated. All rights reserved. Although the information contained herein is believed to be accurate, no other representations are made concerning the information. Under no circumstances shall Baker Hughes INTEQ be
liable for any incorrect or incomplete information. All technical specifications and commercial information concerning the products and/or services described herein may be changed at any time without further notice.