Professional Documents
Culture Documents
Stage Piano: User's Manual
Stage Piano: User's Manual
User's Manual
You are recommended to study this manual carefully before using the unit.
Precautions
Please read the following carefully before use:
Do not expose the piano to high temperature, direct sunlight and excessive dusty places.
Do not place the piano too close to other electrical appliances such as television and radio. It may cause interference.
Do not place the piano to excessive humid area. Avoid putting container with liquid on top of the piano in order to
prevent damage of the internal parts of the piano by flowing liquid.
Always unplug AC cord by gripping the plug firmly, but not pulling on the cable.
When the piano is not in use or in the time of thunderstorm, please disconnect the power supply.
Avoid adjusting the volume level to the maximum or to the levels that you feel uncomfortable, we recommend you to
limit the volume level to two-thirds of the max for preventing the damage of audiory sense.
Unplug the power cable before cleaning the piano. Do not connect or disconnect the power cable with a wet hand.
To avoid damages, turn off the power switches before you disconnect the related devices from the piano.
Clean the piano and remove the dust with a dry soft cloth or a slightly damp cloth.
Never use cleaners such as thinner or alcohol. To prevent any damage on the surface of the LED display, please
use lens cleaning tissue to clean the display.
If the piano cable is damaged, please do not use the piano. Otherwise it may cause fire or electrical hazard.
In case of malfunction due to improper handling the piano, please switch off and on again after 30 seconds.
Do not attempt to disassemble or repair the piano. If the piano does not work properly, please contact the
approved repairer.
2
Downloaded from www.Manualslib.com manuals search engine
Conent
Main Feature 4
General Guide 5
Control Panel 6
The Connectors 7-8
- Power Jack 7
- Headphones Jack 7
- AUX OUTJack 7
- Sustain/Soft Jack 8
- MIDI IN/OUT Jack 8
Operation 9-19
- Power on & Master Volume 9
- Song 9
- Voices and Effects 10
- Metronome 15
- Style Control 15-16
- Record 17-18
- Lesson 18
- SD Function 18-19
MIDI 20-24
- MIDI Controler 20
- Command 21
- Channel 22
- Value 23
- MIDI OUT 23
- What is MIDI 24
Specifications 25
Voice List 26
Style List 26
Song List 27
MIDI Implementation Chart 28-29
3
Downloaded from www.Manualslib.com manuals search engine
Main Feature
Keyboard:
88 touch response keyboard with 3 touch levels.
Operation:
Use the [+] & the [-] button or direct select button to select desired function & parameters.
Voice:
20 voices in all, 10 direct select buttons to select.
Style:
20 piano styles in all, use the [+] & the [-] button to select.
Song:
60 songs in all, each one has self-learning mode.
Song learning:
Use the [TRACK1 / SONG MELODY OFF] button to enter.
Record:
1 user song, include 2 record track.
SD card:
Play midi files, save recorded data.
MIDI ctrl:
Send out midi control message
Style :
START/STOP, ACC VOL, FILL A/FILL B.
Pedal:
Sustain pedal, soft pedal .
Interface:
MIDI in/out, USB, Phone, Aux in/out
4
Downloaded from www.Manualslib.com manuals search engine
General Guide
Top View 4
Rear View
5 6 7 8 9 10 11 12
5
Downloaded from www.Manualslib.com manuals search engine
Control Panel
2 11 12 13 14 15 16
3 4 5 6 7 8 9 10 17 18 19 20
1 21 22 23 24 25 26 27
6
Downloaded from www.Manualslib.com manuals search engine
Power Jack
This piano can be powered from a standard household 12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
Headphones Jack
Headphones
Jack 1
1 When an optional set of stereo headphones is
connected with the headphones jack 2, the sound from
speakers will switch off automatically resulting in only
the sound from headphone to be heard.
Headphones
2 When jack 1 is connected with the stereo headphones, Jack 2
the sound can be heard from both headphones and
speakers of the piano.
Never use the headphone with high volume, as it may hurt your sense of hearing.
To prevent the damage of the speakers, ensure that the volume is set to the minimum
level before connecting the power and other devices.
AUX OUT Jack 12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
When you want to listen to the voice with an amplifier, L/MONO R SUSTAIN SOFT
connect amplifiers to the AUX OUT L/MONO and R jacks
on the rear panel. The volume is adjusted with the
VOLUME button. (For monaural playback, use the L/
MONO jack. For stereo playback, connect both L/
MONO and R jacks.)
To avoid damaging the speakers, please ensure that
volume has set to the minimum level before connecting
the power and other devices.
7
Downloaded from www.Manualslib.com manuals search engine
AUX IN Jack
12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
Sustain Jack
12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
An optional footswitch can be plugged into the SUSTAIN
jack for sustain control. The footswitch function is like
the sustain pedal on a piano. L/MONO R SUSTAIN SOFT
Soft Jack
12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
An optional footswitch can be plugged into the SOFT
jack for soft control. Step on the soft pedal , all notes
played on the keyboard have a soft effect. L/MONO R SUSTAIN SOFT
MIDI is a world wide standard that makes it possible for 12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
USB Jack
Connect PC or other USB host devices that support
USB Audio.
For devices with USB cable, you can simply connect the
MIDI/USB convertor to your USB connector on your
devices and plug the MIDI in and out cables into the
piano, after the driver is installed and initialization is
finished, you can choose USB Audio Device in the
device menu of the software to transfer midi data.
8
Downloaded from www.Manualslib.com manuals search engine
Power on & Master Volume
4 Press the [+] and the [-] button synchronously, and then
power on the piano. it can reset all the setting to the
default value and erase the record data.
NOTE:
If the LED display has not lightened up after you power on the piano, please check the power supply.
If the piano is silent, the volume may be adjusted to its minimum level.
Although Mains switch is in OFF position, the piano is not disconnected from the power supply completely!
Song
There are 60 songs in total. (See Appendix 3 ). STYLE VOICE
1 PLAY a song:
Press the [SONG] button to enter the song mode, the
VOICE STYLE
SONG flag on LED is lightened. It will play all songs SONG
SONG
circlely.
Enter the song mode Song flag
and play all songs circlely. is lightened
9
Downloaded from www.Manualslib.com manuals search engine
2 SELECT a song:
Use the [+] or [-] button to select the song you want.
If you select the new song, LED will display it's
number at first and then display introductory beat and
the measure count. VOICE STYLE SONG
Voice Select
1 When power on, LED lightens the VOICE flag and
VOICE STYLE SONG
displays the 001 voice number.
SONG Display VOICE R1
3 Press the [DUAL] button to enter the dual voice mode, VOICE STYLE SONG
Select a voice
4 you can select other voice by pressing the [+] and the
[-] or voice Direct Select buttons.
Press the first time to select upper layer voice , press the
second time to select the lower layer voice.
Press the second time to select BRT.PIANO
When you select the upper layer voice, the upper layer
indicator turns on.
When you select the lower layer voice, the lower layer
indicator turns on and the upper layer indicator turns off.
10
Downloaded from www.Manualslib.com manuals search engine
Dual
The piano has dual voice. You can create the new sound through this function for richer and punchier
sounds. It seems that you can get two different sounds at the same time when you press a key in the right
area in the keyboard.
Transpose
1 You can change the pitch of the entire keyboard by
semitone steps with TRANSPOSE function. - TRANSPOSE + - TEMPO +
- TRANSPOSE + - TEMPO +
4 In TRANSPOSE setting , press the [TRANSPOSE +]
and [TRANSPOSE -] button simultaneously to set the
value to default. VOICE STYLE SONG
11
Downloaded from www.Manualslib.com manuals search engine
Touch
This function allows you to turn on the dynamic
level when playing the keyboard.
displays touch response type 00X temporarily on LED. The indicator flashes Display touch value
NOTE:
If you don't press anybutton for 2 seconds in touch
response type select mode,it will quit this mode
automatically.
Reverb/Chorus
Reverb/chorus effect will enhances the piano with VOICE STYLE SONG
VOICE STYLE
2 Press the [REVERB/CHORUS] button to switch the SONG
12
Downloaded from www.Manualslib.com manuals search engine
Split Point
Default split
point F#3
3 The new split point belongs to the left area of the
keyboard.
Chord Melody
area area
Brilliance
13
Downloaded from www.Manualslib.com manuals search engine
Scale
This function allows you to experience different scales
when you play certain genres of music that is not comp-
osed based on twelve equal interval.
VOICE STYLE SONG
Press the button again to exit scale Press and hold the button for
mode. The indicator goes off. 2 seconds to enter scale select
4 Hold and press [SCALE] for 2 seconds to enter into status. The indicator is flashing.
SCALE select status. The scale number displayed on LED.
5 Use [+] or [-] to select the scale type, play the key from
C7~B7 to select scale root.
C7 B7
14
Downloaded from www.Manualslib.com manuals search engine
Metronome
1 Press the [METRO] button to turn on the metronome
and the metronome sound will be played.
2 Press the button again to turn off the metronome. The LED indicator is lightened.
3 When the style stops to play, the beat type follows 4/4 Metronome can be turned on
after turning on the metronome. together with the style.
When the style begins to play, the beat type follows the
current style.
Style Control
STYLE VOICE
There are 20 styles in total. (See APPENDIX 2).
Style number
SONG Style flag
1 Press the [STYLE] button to enter style mode, the style
number and style flag on the LED are both lightened.
2 You can use the [+] / [-] button to select the style you
want.
VOICE STYLE SONG
1 When the style is not playing, you can press the Chord area
[START/STOP] button to enter "SYNC START" Enter " SYNC START " mode
mode, the beat point are flashing at the same time,
now the style will be start with A.B.C. on if you press
the key in the chord area on Piano.
15
Downloaded from www.Manualslib.com manuals search engine
Style is not playing:
FILL IN A/B
START ACC START ACC
/STOP VOL /STOP VOL
Style is playing:
Accomp Volume
START ACC
/STOP VOL
2 You can use the [+] / [-] button to adjust the volume
Adjust the
from 0 ~ 31. (Default Accomp Value is 24) The ACC volume
VOL indicator is flashing at the same time. VOICE STYLE SONG
The indicator
3 When power is on, the ACC VOL indicator is on. START
/STOP
ACC
VOL
is flashing.
- TRANSPOSE + - TEMPO +
2 Press the [TEMPO+] and [TEMPO-] synchronously to Adjust the tempo from 30~280. Display current tempo
set to the default tempo. - TRANSPOSE + - TEMPO +
3 When the style is not playing, it will take out the default VOICE STYLE SONG
tempo of the style if you select the style.
Press them
When the style is playing, it will keep the current tempo together. Display default tempo.
once you change the style.
16
Downloaded from www.Manualslib.com manuals search engine
Record
NOTE:
The recorded data will not be lost when you turn off the
There are one user song can be recorded, include power.
2 Melody Tracks. Hold on the [+] and [-] button together and power on
the piano,it will erase all the recorded data.
Record Song
Enter the record mode,
the indicator is flashing.
1 Waiting for recording:
2 Start recording:
When 4 beats flashes on LED, you can play the
keyboard directly to start recording, the RECORD
indicator turns on, the track flag that you select is Play the keyboard to start recording.
still flashing.
Chord area
17
Downloaded from www.Manualslib.com manuals search engine
Playback Song
1 Press the [PLAY/STOP] button for the first time
to playback the record data, you can choose any
one track or all two tracks to play, the indicator is on. Enter the record playback Then, select the track,
mode, the indicator is on. the indicator is on.
to stop playback.
Lesson
STYLE VOICE
SD Function
There is a standard SD external interface which supports
the cards of 16M ~ 2G capacity. It is compatible with
the file system format of the FAT 16/32.
18
Downloaded from www.Manualslib.com manuals search engine
1 SD card function
2 SD button
It can play MIDI file and save recorded data at the root
directory. Play all files and indicator is on.
Play
When power is on, press the [PLAY] button to play all VOICE STYLE SONG
In the SD mode, you can select the midi file with [+]
or [-] button. The default file number is 001. VOICE STYLE SONG
Store
It can save the recorded data to SD root directory as VOICE STYLE SONG
19
Downloaded from www.Manualslib.com manuals search engine
Midi Controler
Summarize
Under MIDI controller mode, other buttons all
have no effect except four MIDI controller, [+]/[-]
numeric button, the VOICE/STYLE/SONG button.
Command +
MIDI OUT
Press this button, the MIDIOUT indicator turns on
and it send out a set of midi control command, the
indicator flashes in the process of sending out,
when it finish sen ding out, the indicator go off.
Value
Press this button, the value indicator is on, you
can set the value by pressing the [+], [-] or numeric
button.
Channel
Press this button, the channel indicator is on,
you can select any channel that you want from
1-16 by pressing the [+], [-] or numeric button.
20
Downloaded from www.Manualslib.com manuals search engine
Command
127
VOICE STYLE SONG
If the number you set is from 0 127 , that represent as the DATA1 of Bn order, and the value of
DATA2 can be set by pressing [VALUE] button.
If the number you set is 128,that means Cn command be selected, the value of DATA can be set by
pressing the [VALUE] button .
If the number you set is 129, that means Dn command be selected,the value of DATA can be set by
pressing the [VALUE] button .
If the number you set is 130, that means En command be selected, the value of DATA can be set by
pressing the [VALUE] button .
When the value you set is 0H, that means to bend the note down to the lowest,
When the value you set is 40H, that means to bend the note to the normal value;
When the value you set is 7FH, that means to bend the note up to the highest.
21
Downloaded from www.Manualslib.com manuals search engine
4. In COMMAND mode, press the [VALUE]/
[CHANNEL] button to enter into VALUE and
CHANNEL setting mode, corresponding button
indicator turn on, the COMMAND indicator go off.
5. If you press the [MIDIOUT] button, it will enter
into midiout mode and send out midi control
message.
6. Press the [COMMAND] button continuously to
select the next command type (as follows ).
once
VOICE STYLE SONG
twice
NO. Adjustdigit value Display(default) Commandtype name VOICE STYLE SONG
1 0-127 001 Bn
2 128 Cn Cn
3 129 Dn Dn thrice
4 En En Press the COMMAND
130 VOICE STYLE SONG
button continuously
quartic
VOICE STYLE SONG
Channel
22
Downloaded from www.Manualslib.com manuals search engine
Value
1. Press this button to enter into VALUE setting
mode, the indicator is on, the LED will show the
default VALUE as 064.
VOICE STYLE SONG
Midiout
23
Downloaded from www.Manualslib.com manuals search engine
What is MIDI
12V AUX OUT AUX IN PEDAL MIDI IN MIDI OUT USB
3 Connection
It can connect with PC or other MIDI equipment. MIDI IN/OUT
Terminals
MIDI Connection
1 Connection rule
In midi connection, the equipment which controls another equipment is called Host Equipment.
Another equipment is called Affiliated Equipment.
The host equipment's MIDI OUT connect with affiliated equipment's MIDI IN.
Do not connect MIDI OUT with MIDI IN on the same equipment.
2 MIDI IN
You can use a MIDI cable to connect the MIDI IN terminal of system to another MIDI OUT terminal of compatible MIDI
electronic instrument. Use MIDI IN, system can receive midi data such as note, program and touch etc. in order to be
handled by another MIDI instrument.
MIDI OUT
You can use a MIDI cable to connect the MIDI OUT terminal of system to another MIDI IN terminal of compatible MIDI
electronic instrument. Midi data of system can be sent by MIDI OUT, when a note is generated, the relative message will
be transmitted. System can control other midi instrument by sending program change messages
Major Application
1 The piano can control other equipments or electronic instruments.
24
Downloaded from www.Manualslib.com manuals search engine
Specifications
25
Downloaded from www.Manualslib.com manuals search engine
Voice List
Style List
No Name of Style
001 Pianist
002 8 Beat
003 16 Beat
004 Ballad
005 Pop Piano
006 Boogie
007 Slow Rock
008 Swing
009 Jazz
010 Jazz Waltz
011 Swing Fox
012 Shuffle
013 Twist
014 Country Ballad
015 Bossa Nova
016 Latin
017 March
018 6/8 March
019 Waltz
020 Slow Waltz
26
Downloaded from www.Manualslib.com manuals search engine
Song List
27
Downloaded from www.Manualslib.com manuals search engine
MIDI Implementation Chart
Function Transmitted Recognized Remarks
Basic Default 1ch 1-16ch
Channel Changed 1-16ch 1-16ch
Default 3
Mode Messages
Altered ***********
Note 09-120 0-127
Number : True voice *********** 0-127
Velocity : Note on 9nH,V=1 -127
Note off 9nH,V=1-127 (9nH,V=0;
9nH,V=0 8nH,V=0- 127)
After key s
Touch Ch s
Pitch Bend
Control 0 Bank Select
Change 1 Modulation
5 Portamento Time
6 Data Entry
7 Volume
10 Pan
11 Expression
64 SustainPedal
65 Portamento on/off
66 SostenutoPedal
67 Soft Pedal
80 Reverb Program
81 Chorus Program
91 Reverb Level
93 Chorus Level
120 A ll Sound Off
121 Reset A ll
123 Controllers
All Notes Off
Program
Change : true # *********** 0-127
System Exclusive
System Song Position
Common Song Select
: Tune
System : Clock
Real Time :Commands
*1 *1
Aux :LOCAL ON/OFF
28
Downloaded from www.Manualslib.com manuals search engine
MIDI Implementation Chart
Version: G01
29
Downloaded from www.Manualslib.com manuals search engine