Professional Documents
Culture Documents
Rovalve Fig 215 Slide Gate Valve 2-24 Inch
Rovalve Fig 215 Slide Gate Valve 2-24 Inch
2” thru 24”
Features
• Ideal valve for dense slurry and solids
applications and wet or dry abrasives.
• Slide through gate design cuts
through solids providing consistent
operation in the most difficult
applications.
• O-Port style gate fully protects the
seat face in open position, giving you
longer service life.
• Will close through a static column of
material.
• Fully fabricated from heavy plate and
sheet.
• Available in 304, 316 and 317L
stainless steel wetted parts or custom
designed for your needs using a wide
variety of materials including
- Monel® - Titanium
- 254SMO - Hastelloy®
- Alloy 20 - 310 SS
• MSS face-to-face standard.
• Other special face-to-face dimensions
are available.
• Precision machined seat with multiple
gate guides.
• Unidirectional shut-off.
• Beveled gate cuts through solids.
• Full operation, leakage and cycling
tests.
• Certified test reports on request.
Total Flow Control Solutions Tyco reserves the right to change product design and specifications ROVMC-0087-US-0204
without notice. Copyright © 2002 by Tyco International Ltd.
Rovalve Figure 215 Slide Gate Valve
2” thru 24”
With a conventional This can cause Using a slide gate ....instead of having to ....when the gate goes
knife gate valve, solids problems; the seat is valve, a similar buildup push its way through, to the open position, the
may build up in front of subject to wear and the may occur, but the seat the gate moves into the solids are drawn back
the exposed seat.... gate may not fully close. is protected and.... lower body, taking the out and sent
solids with it.... downstream.
Tyco reserves the right to change product design and specifications ROVMC-0087
without notice. Copyright © 2002 by Tyco International Ltd. 2
Rovalve Figure 215 Slide Gate Valve
2” thru 24”
Features
Umbrella stop-stud assembly allows gate
adjustment, assures proper flow
Metal-to-metal seat
(O-ring or hard surfaced available)
Tyco reserves the right to change product design and specifications ROVMC-0087
without notice. Copyright © 2002 by Tyco International Ltd. 3
Rovalve Figure 215 Slide Gate Valve
2” thru 24”
www.tycovalves.com
The data presented in this bulletin is for general information only. Manufacturer is not responsible for acceptability of these products in relation to system requirements. Patents and Patents
Pending in U.S. and foreign countries. All rights reserves. Printed in U.S.A. Tyco reserves the right to change product design and specifications without notice. © Copyright 2002.
Tyco reserves the right to change product design and specifications ROVMC-0087
without notice. Copyright © 2002 by Tyco International Ltd. 4