Professional Documents
Culture Documents
WABCO Smartboard Driver Manual NZ
WABCO Smartboard Driver Manual NZ
DRIVER MANUAL
WABCO Proudly Supported in New Zealand by Gough Transpecs & Gough TWL
SMARTBOAD DRIVER MANUAL
INTRODUCTION
Monitoring a wide range of trailer functions is important to improve the performance of haulage
The SmartBoard provides a wide range of functions that can be accessed via symbols from the
main menu. The chapters below describe the various functions.
The following rules apply:
• If a system is not available and no information can be retrieved from it, the corresponding
menu symbol is not displayed.
• When the vehicle is at a standstill, the values that were last saved are displayed.
• These may deviate from the actual values (e.g. the tire pressure if a leak is present)
OPERATING
INSTRUCTION
Button - Function
Selection of next menu item
or next option
Messages
Driver Manual
Icon Function Display Description Options
Name and / or Desciption of the
descibtion of the information or function The displayed
function you see on left display buttons / functions
Similar are avialabe for the
to left display
Smart-
Board
icons
2
TABLE OF CONTENT
TABLE OF CONTENT
Function Short Description Page
Air Suspension Operating status of the Air Suspension e.g. lifting and lowering 4
of vehicle body and lift axle
Load Monitoring Display of current axle loads 7
Tire Monitoring Display of tire information such as current tire pressure and 10
nominal pressure
Finisher Brake 10
Messages 16
Type of fault 19
Hints 20
Weight Calibration 21
Load Monitoring 28
3
AIR SUSPENSION MENU
Lower vehicle
Stop*
Front Lifting and lowering of
Up & Down 2-point drawbar trailer Lift front axle
Stop*
Rear Lifting and lowering of
Up & Down 2-point drawbar trailer Lift rear axle
Stop*
Left Up & Down Lifting and lowering of
2-point semi-trailer Lift left side
Stop*
* Only if dead-man’s function is deactivated in parameterization
4
AIR SUSPENSION FUNCTIONS
Stop*
Request Lifting / Lowering to (pre-)
Driving Level selected driving level Start lifting /
lowering
5
AIR SUSPENSION FUNCTIONS
OptiTurn automation is
disabled Enable OptiTurn
automatic
OptiTurn is on
Stop OptiTurn
6
AIR SUSPENSION FUNCTIONS
Load Monitoring
Function Display Description Options
Display of current axle Display of current axle
loads loads Go to next axle
7
MILEAGE COUNTER
Mileage Counter
Function Display Description Options
Display of mileage Odometer Displays mileage
and trip data recorded by Go to next
SmartBoard item
Mileage Displays mileage
recorded by EBS Go to next
item
Trip EBS Displays trip
mileage counter Go to next
EBS item
Trip Displays trip
mileage counter Go to next
SmartBoard item
8
LINING WEAR
Lining Wear
Function Display Description
Status display for
brake linings are OK
SafeStart
Function Display Description Options
Enable / Disable The brake is applied
automatic brake in (function was activated by Release
case of unsafe driving switch) SafeStart brake
condition (parking brake has to
(overruling the be applied before)
functional swich) The brake is released
Apply SafeStart
brake (parking brake
has to be applied
before)
Bounce Control
Function Display Description Options
Smooth release Bounce Control function
of brake to avoid is deactivated Activate Bounce
bouncing caused by Control - only
bogie tension possible if park brake
is engaged
Bounce Control function
is active Stop
9
BRAKE RELEASE
Brake Release
Function Display Description Options
Safety function. User
of brake has to mind all safety Release brake
precautions
Mind all safety
precautions!
Tire Monitoring
Function Display Description Options
Display of tire Displays the current and
pressure information nominal tire pressure from Go to next tire
IVTM / OptiTire system pressure
Finisher Brake
Function Display Description Options
Finisher Brake Finisher Brake is
deactivated Enable Finisher
Brake
Switch to brake
pressure mode
Finisher Brake is
activated Disable Finisher
Brake
Switch to brake
pressure mode
Finisher Brake Setting brake pressure in
steps of 0.5 bar Increase brake
pressure
Decrease brake
pressure
10
VEHICLE INCLINATION
Vehicle Inclination
Function Display Description
Display of inclination Displays current Vehicle Inclination and max.
of the trailer allowed Vehicle Inclination
Deactivate park
brake temporarily
11
IMMOBILIZER
Immobilizer
Function Display Description Options
Lock / Unlock trailer The trailer wheels are
brakes with a PIN unlocked. Lock trailer by Select numbers
entering PIN 0 ... 9
Go to next digit
position
input
Optional: engage parking -
brake before release
input
Set new PIN See Settings: Set new PIN page 15
12
LANGUAGE
Language
Function Display Description Options
Select language The current language is
out of the available English Go to next
languages* language
Select language
Extras Menu
Function Display Description Options
Operating status of System information and
Extras Menu settings can be displayed Select function
and/or changed
Extras Functions
Function Display Description Options
Displays sensor data -
of trailer, e.g. voltages,
Trailer Info supply pressure, braking
Display pressure and bellow
pressure
Displays the recorded
board data Go to next item
TEBS
ODR Data
Data
13
EXTRAS FUNCTIONS
input
Change the main menu
order Go to next item
Select menu
Main item to be moved
Menu Move item
Order
item order
Save new order
14
EXTRAS FUNCTIONS
Notes
15
MESSAGES
16
CODES OF MESSAGES
CODES OF MESSAGES
See also: Hints page 19
17
CODES OF MESSAGES
18
CODES OF MESSAGES
Notes
19
HINTS
HINTS
•
• All data is for information only.
• The display information or messages correspond to the situation of the last or current
driving operation.
•
SmartBoard in the product database INFORM under www.wabco-auto.com.
• Only an authorized workshop is allowed to change SmartBoard batteries (concerns not ADR
version 446 192 111 0)
Switch-on / Switch-off
Power supply Event Consequence
Trailer vehicle coupled:
ISO 7638 Ignition ON Display on
Ignition OFF Display off (with IVTM after
max. 20 min.)
Trailer vehicle uncoupled:
Internal battery of Pressing of a button (> 2 s) Display on
SmartBoard (not in ADR
Pressing of a button Display updated
version 446 192 111 0)
Notes
20
WEIGHT CALIBRATION - UNLADEN
21
WEIGHT CALIBRATION - UNLADEN
22
WEIGHT CALIBRATION - UNLADEN
23
WEIGHT CALIBRATION - PARTLY LADEN
24
WEIGHT CALIBRATION - PARTLY LADEN
25
WEIGHT CALIBRATION - FULLY LADEN
26
WEIGHT CALIBRATION - FULLY LADEN
27
LOAD MONITORING
28
NOTES
Notes
29
NOTES
Notes
30
NOTES
Notes
31
QUALITY ASSURED
When purchasing a WABCO product, please make
sure it has the typical WABCO product marks
WABCO
WABCO (NYSE: WBC) is a leading innovator
and global supplier of technologies that improve
www.wabco-auto.com