Professional Documents
Culture Documents
Sheet No. 1 Chapter 5
Sheet No. 1 Chapter 5
Sheet No. 1 Chapter 5
Q1/ The steel beam has the cross-sectional area shown. If w0= 3kips/ft determine the
maximum bending stress in the beam.
Q2/ The wood beam has a rectangular cross section in the proportion shown. Determine its
required dimension b if the allowable bending stress is 10 MPa.
Ans: b =53.1mm
Q3/ Knowing that the allowable stress for the steel used is 160 MPa, select the most
economical wide-flange beam to support the loading shown.
2nd stage /Mechanical Eng. Sheet No. 1: Chapter 5 Strength of materials
Q4/ Determine the largest permissible value of P for the beam and loading shown, knowing
that the allowable normal stress is +6 ksi in tension and −18 ksi in compression.
Ans:P=0.994 kips
Q5/Draw shear and moment diagram for the beam shown below