This certificate confirms that Engr. Talha Salam completed 40 hours of online training from April 3rd to 12th, 2021 on practical power system design and simulation. The training covered topics such as SLDS concepts, control and protection drawings, fault analysis and simulation, AC/DC load flow analysis, star coordination, AC/DC arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable/DG integration using ETAP software versions 12.6 and 19.
This certificate confirms that Engr. Talha Salam completed 40 hours of online training from April 3rd to 12th, 2021 on practical power system design and simulation. The training covered topics such as SLDS concepts, control and protection drawings, fault analysis and simulation, AC/DC load flow analysis, star coordination, AC/DC arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable/DG integration using ETAP software versions 12.6 and 19.
This certificate confirms that Engr. Talha Salam completed 40 hours of online training from April 3rd to 12th, 2021 on practical power system design and simulation. The training covered topics such as SLDS concepts, control and protection drawings, fault analysis and simulation, AC/DC load flow analysis, star coordination, AC/DC arc flash analysis, optimal capacitor placement, harmonic analysis, transient analysis, protection scheme designing, motor analysis, and renewable/DG integration using ETAP software versions 12.6 and 19.
THIS CERTIFICATE ENSURED ACTIVE PARTICIPATION OF ENGR. TALHA SALAM (TRAINEE ID- AE0092-A-712G) IN PRACTICAL POWER SYSTEM SCHEME DESIGN AND SIMULATION (3RD – 12TH APRIL 2021-40 TRAINING HOURS), ENGR. TALHA SALAM IS TRAINED FOR BASIC SLDS CONCEPTS,CONTROL AND PROTECTION DRAWINGS CONCEPT, FAULT CONCEPTS AND SIMULATION, AC & DC LOAD FLOW ANALYSIS, STAR COORDINATION(50,50N,51,51G,46,64G,87,27,81,32,52,21), AC & DC ARC FLASH ANALYSIS, AC & DC OPTIMAL AND UNBALANCED LOAD FLOW ANALYSIS, GROUNDING GRIDS, OPTIMAL CAPACITOR PLACEMENT, HARMONIC ANALYSIS, TRANSIENT ANALYSIS, PROTECTION SCHEMES DESIGNING ,STATIC AND DYNAMIC MOTOR ANALYSIS, RENEWABLE AND DG INTEGRATION AND ANALYSIS, SEQUENCE SWITCHING PROGRAMMING ON ETAP12.6 AND ETAP 19.