Professional Documents
Culture Documents
Covers Series CPT in PVC
Covers Series CPT in PVC
70 25
70/18 1090 15 and 1/2
stainless
steel strap
18
profile
Storage and handling covers
actual length 1090 mm to direct sun light or to heat L 30X30X
The covers must be stored and handled in ~ 1050
useful length sources,
mm when not assembled on the
flat position on pallet, maintaining the white conveyor.
protection film (as they are dispatched). Store them in shady aired place. Not
respecting these prescriptions can cause
Warning: do not expose the packed cover's deformation due to heat.
r
200
The mechanical
N properties of the belt covers
are summarised in the following table. stainless steel strap
opening
Characteristics Standards Units Values for colors
Translucent
with bolts
Vicat point (49N) M6x35 ISO R306/NFT 51021 °C 79
Fire rating NF 92507 M1
200
195
1 3 1 3
87
305
cover module 70x18 supporting arch
70 25
18
6 Covers actual length 1090 mm
useful length ~ 1050 mm
200
N
opening
r
r
195
1 Fixed1 galvanised hook 3 Example 1 of ordering: 3
87
2 Bolts M8x20 cadmium plated CPT
three holes ѓ 73, 650 quantity 5
2 Washers cadmium plated plus fixing accessories
CPT 1F, 400 quantity 5+1=6
*type CPT 4
actual
2 Stainless steel straps and spring with length 1090 mm
CPT 4, 800 quantity 3
galvanised hook plus~fixing
useful length 1050 accessories
mm
2 Fixed galvanised hooks CPT 1F, 400 quantity 6+1=7
4 Bolts M8x20 cadmium plated
4 Washers cadmium plated
Installation method The steel strap is positioned and fixed as
Each cover section must be fixed by a follows:
stainless steel strap of 20 mm width and a) on one side in the angle section drilled to
0,6 mm thickness. accept bolts and washers M8x20.
cover
The steel strap is positioned on top module
of the b) on70x18 supporting arch
the other side and in the identical
section in the lower corrugation. position with a zinc plated hook fixed
During the installation the stainless steel to the angle section with a bolt, nut and
straps must be cut and punched. washer M8x20.
stainless stainless
steel strap steel spring
hook
fixed hook
profile
bolt M8X20
L 30X30X4 nut and washer
306
r
200
N
opening
fixing in three
positions
r
r
with bolts
M6x45
200
195
1 3 1 3
87
three holes Ø 7
*type CPT 5-6-7 Cover Belt Opening Radius Development Weight Nr. Fixing accessories
2 Arch in profile 20x20x2 galvanized Type width r straights of accessories with supporting
mm mm mm mm kg per cover arch*
6 Screws M6x45 zinc-plated
6 Nuts M6 zinc-plated CPT 5 1000 1350 675 2520 6.0 2 CPT 5F 1000
6 Washers zinc-plated 6 1200 1600 800 2910 7.0 2 6F 1200
6 Locking nuts M6 zinc-plated
2 Fixing brackets 30X4X120 in zinc 7 1400 1800 900 3230 7.7 2 7F 1400
plated steel (*) fixing accessories
307