Professional Documents
Culture Documents
API Brochure 17042020
API Brochure 17042020
API Brochure 17042020
Steam Turbines
Triveni Turbine Limited
Triveni offers a broad range of steam turbine solutions in
the sub 30MW range to address the specific requirement
of every industrial application.
These turbines are majorly used in the conventional
fossil-fired steam power plants as well as in Oil & Gas, Installations Over 4000
Biomass, District heating, Waste-to-energy, Solar CSP in over 70 steam turbines
and many other industries. countries installed
globally
Joint venture formed between GE Oil & Gas and Triveni
Turbine Limited ( GETL), manufactures and supplies
steam turbines above 30MW upto 100MW range.
With a fleet of more than 4,000 steam turbine units
installed, Triveni is present in more than 70 Countries
worldwide offering its robust, reliable and efficient steam
Reliable & Lower
turbines.
Robust Lifecycle
With over 5 decades of experience and continuous steam cost
development in steam turbine technology, Triveni has turbines
stayed at the forefront of development and is a prime
partner for your business.
Presence in
over 70 Countries
Our Strengths
Proven track record of manufacturing steam Engineering and supply of complete Steam
turbines compliant to highly stringent Shell Turbine package including accessories
Design Engineering Practices (DEP) over and (Panels, Power evacuation systems, control &
above API 612 monitoring (MCMS, DCS / PLC) solutions
Wide range of API 611 compliant steam System Engineering of complex Control &
turbines from 30 kW to 15 MW and API 612 Instrumentation suitable for hazard area
compliant steam turbines from 1.5 MW to 30 installation with IEC Ex, ATEX and other
MW statutory compliances
API 677 & 613 and Shell DEP compliant Turbines, gear units and Lube Oil consoles
general & special purpose high efficiency gear suitable for outdoor installation in desert /
units marine / frigid environments with careful
selection of materials as per International
Complete Turnkey Solutions (Erection &
standards (ASTM / DIN / IS / BS etc)
Commissioning, Annual Maintenance
Contracts, Lifetime Spares Support) Exhaustive product line from proven modular
building blocks
02
Engaging with Global Clientele.
Heightened Engagement with reputed Approved Steam Turbine
International EPCs, Licensors, PMCs such as Test facility by other OEMs
of turbines such as
Fluor Qatar Petroleum Mitsubishi Heavy Industries
L & T Hydrocarbons Petrojet Toshiba
NIOEC Saudi Arabian Basic Industries GE Oil & Gas
Corporation (SABIC)
Engineers India Limited
Egypt General Petroleum Co (EGPC)
Projects & Development India Limited
Qatar Fertilizers
Haldor Topsoe
AMEC Foster Wheeler (Wood PLC)
Chemicals & Allied Industries (Oman)
Jacobs
Abu Dhabi National Oil Company
Tata Consulting Engineers (TCE)
03
API Single Stage Turbines
API 611 compliant Single Stage turbines offer low footprint,
wide speed range, wide range of steam conditions, multiple
options to cater to the user’s operational needs.
Mechanical /
Electronic Over
Speed Protection
systems
Bearing Temperature
Detectors / Housing Probes
SLN 1 2 3 4 5 6 7 8 9 10 11
TST - 14- TST - 24- TST - 28 - TST - 19 - TST - 21 - TST TST - 20 - TST - 19 - TST - TST - TST -
Model 1003 1008 1018 1025 1030 (17.5/19) - 1120 2010 (17/22) - (19/20.5)- (20.5/24)-
1060 2025 2030 2120
Max Inlet Pr in 64 / 910 64 / 910 64 / 910 64 / 910 72 / 1094 85 / 1209 110 / 1565 64 / 910 72 / 1094 72 / 1094 85 / 1209
kg/cm2g / psi g
Max Inlet temp 485 / 905 485 / 905 485 / 905 485 / 905 510 / 950 550 / 1022 485 / 905 510 / 950 530 / 986 530 / 986
C / 0F
0 530 / 986
Max No of Stages 1 1 1 5 7 8 8 5 5 7 10
Max Speed in RPM 5500 5500 5500 7500 7500 7500 6900 7500 7500 7500 6900
Max Rating in kW 300 800 2500 3000 5000 8000 15000 1500 2500 5000 15000
3" / 76.2 mm 4" / 101.6 mm 6"/152.4mm 6"/152.4mm 8"/203.2mm 8"/203.22mm 2x8"/2x 4"/101.6mm 6"/152.4mm 8"/203.22mm 8"/203.22mm
(900#) (900#) (900#) 203.22mm
Max Inlet Size / Rating 4" / 101.6 mm 6" / 152.4 mm (900#) (1200#) (1200#) (1500#) (900#) (1200#) (1500#) (1500#)
(900#) (900#)
8" /203.2 mm 12"/304.8mm 16"/406.4mm 20"/508mm 24"/609.6mm 28"/711.2mm 40.35"x19.48" 38"x16"(300#) 47"x15"(300#) 59"x29.5"(300#)
10" / 254 mm (600#) (900#)
Max Exhaust Size / (300#) (300#) (300#) (600#) (900#) (300#) 966mmx 1200mmx 1500mmx
16"/406.4mm 1095mmx 406mm 380mm 750mm
Rating (300#) 495mm
T TRIVENI
TST 1003 SERIES S STEAM
T TURBINES
Back Pressure Steam
Turbines Upto 300 kW - SPACING
Single Stage Turbine
4 14 MAXIMUM MEAN DIAMETER IN
INCHES
- SPACING
0 SECOND DIGIT OF
RATING IN MW
Back Pressure
Steam Turbines Up
to 800 kW Single
Stage Turbine
TST - 28-1018
Back Pressure
Inlet Steam Power Exhaust Speed Inlet Exhaust
Steam Turbines
Temp Pressure in RPM Diameter Diameter
Up to 2500 kW
Single Stage 4850C / 2500 kW / 18 barg 12” / 304.8 mm
Up to 6000 6” / 152.4 mm
Turbine 9050F 3352 HP /261 psig 16" / 406.4mm
TST-19- TST-(17.5/ TST-(20/19) TST-(24/ TST-(21/25) TST-24- TST-(17/22)- TST-(19/ TST-(22.5/’ TST-(19/25) TST -(19/25) TST-(21/25) TST-(24/ TST-(26/31)-
Model 1025 19)1060 -1100 25)-1150 -1230 1250 2025 20.5)-2030 25.5)-2060 -2080 -2100 -2180 28.5)-2280 2300
Turbine Type BP BP BP BP BP BP Condensing Condensing Condensing Condensing Condensing Condensing Condensing Condensing
Max Inlet Pr in 64 / 910 85 / 1209 85 / 1209 85 / 1209 105 / 1493 110 / 1565 72 / 1094 72 / 1094 72 / 1094 72 / 1094 85 / 1209 85 / 1209 120 / 1707 120 / 1707
kg/cm2g / psi g
Max Inlet temp 485 / 905 530 / 986 530 / 986 535 / 986 535 / 995 535 / 995 510 / 950 530 / 986 530 / 986 530 / 986 535 / 995 535 / 995 550 / 1022 550 / 1022
C / 0F
0
Max Exhaust Pr in 18 / 256 32 / 455 10 / 142 10 / 142 4 / 57 4 / 57 -0.533 /-7.58 -0.533 / -7.58 -0.533/-7.58 -0.533 / -7.58 -0.533 / -7.58 -0.533 / -7.58 -0.533 / -7.58 -0.533 / -7.58
kg/cm2g / psi g
5 8 8 8 9 9 7 9 10 10 11 11 12 11
Max No of Stages
7500 7500 7500 7000 6900 6200 7500 7500 7900 7500 7200 6800 6500 6200
Max Speed in RPM
3000 8000 12000 15000 25000 30000 2500 5000 6000 8000 11000 18000 28000 30000
Max Rating in kW
6"/152.4mm 8"/203.2mm 2x8"/203.2mm 2x10"mm/ 8"/203.2mm 2x10"/254mm 6"/152.4mm 8"/203.2mm 10"/254mm 8"/203.2mm 8"/203.2mm 2x8"/203.2mm 8"/203.2mm 10"/254mm
Max Inlet Size/Rating (900#) (1500#) (1500#) 254mm(1500#) (2500#) (2500#) (1200#) (1500#) (1500#) (1500#) (1500#) (1500#) (2500#) (2500#)
16"406.4mm 28"/711.2mm 26"/660mm 34"863.6mm 32"/812.8mm 30"/762mm 38"x16"(300#) 47"x15"(300#) 60"x20"(300#) 60"x30"(300#) 62"x32"(300#) 70"x33"(300#) 85"x42"(300#) 130"x38.5"
Max Exhaust Size/ 1194mmx (300#)
(300#) (900#) (300#) (300#) (300#) (300#) 965.2mmx 1524mmx 1524mmx 1524mmx 1778mmx 2159mm x 3302mmx
Rating 406.4mm 381mm 508mm 762mm 762mm 838.2mm 1067mm 978mm
Compact System:
Single skid
Compliant to Human Factor Engineering
requirements
Optimised
Blade Chord
Higher
Optimized Optimized Fillet Radii
Tongue design disk width
Tapered
Balancing provision Root
on drive flange
11
Manufacturing – IT Enabled Operations
Business Software Technical software
SAP – HANA CFX
Salesforce.com ANSYS
Primavera Concepts Aero Suite
IOT – Fleet RMD Dyrobes, ARMD
IOT- CNC shop PLM-Teamcentre
ITO- Cost tools Pro-E, Unigraphics
OTR- Primavera Ax-turbo
MISES
Thermoflow,
Gatecycle
Matlab
12
Comprehensive Service Solutions
We offer a unique combination of the latest equipment, a highly skilled team and OEM expertise to
provide a comprehensive range of customised service solutions for industrial steam turbines. Our aim
is to deliver total customer satisfaction and this customer centric approach has enabled us to attain
extremely high repeat customer orders. Our customers can visit the facility during the repair process
and review the progress.
Service Offerings
Full speed Schenck Rotec vacuum balancing tunnel for balancing
turbines, compressors/alternators.
Refurbishment solutions for higher MW turbines, upto 100MW for all makes.
Efficiency restoration/improvement Full speed balancing under vacuum
Health survey & condition assessment Retrofitting turbovisory systems
Relocations of turbine Modernisation of power plants
Upgradation Indigenisation
Re-engineering Residual Life Assessment
13
Case Study 1 Oil Refinery in Middle East
Driven by: Triveni 4 Nos. 1.5 MW and 4 Nos. 2.7 MW
Steam Turbines as per API 612 + Shell DEP +
AMEC FW Project Variations
Steam Turbines inlet steam 41.35 bara, 3700 C as per API 612
commissioned during 2008-09, 2014
Gear boxes as per API 613 | Lube oil system as per API 614
Air Cooled Oil Cooler as per API 661
PLC – Alan Bradley (Failsafe) with redundancy and SIL-3 rating
Machine Monitoring System (MMS) Bentley Nevada model 3500
12 MWe Steam Turbine series with System 1 Analysis system
Generator during installation
12 MW AC Generator, IP 54 enclosure, Class F Insulation, Air
cooled CACA, 500 C Ambient
14
Case Study 3 Oil Refinery in Middle East
Powered by: Triveni 4 Nos. 7 MWe Steam Turbine
Generator Sets as per API 612
Steam Turbines inlet steam 41 bara, 380 Deg C as per API 612
commissioned during 2012-13
Lube oil system as per API 614
Surface Condensers suitable for Sea Water Cooling (Cu-Ni
7 MWe Steam Turbine Tubes)
Generator during installation PLC – Siemens S7 400-FS (Failsafe) with redundancy and SIL-2
rating
Machine Monitoring System (MMS) Shinkawa, Japan model
VM-5 with RV-100 Analysis system
7 MW AC Generator, IP 54 enclosure, Class F Insulation with Sea
water cooled Air cooler (Cu-Ni tubes)
Steam Turbines inlet steam 105 bara, 535 Deg C and exhaust at
7.3 bara as per API 612 commissioned during 2018
Lube oil system as per API 614
Driving Ingersoll Rand make Centrifugal Air Compressors
15
Triveni Turbines
Key Takeaways
Availability
Robust design, construction of turbines by
skilled foremen with hundred of years of
experience
Our turbines across the globe have clocked
tens of millions of uninterrupted operating
hours.
Reliability
Triveni API Steam turbines are fully compliant
to API code + Shell DEP with stringent
specifications
Combined experience from having
successfully commissioned over 4000
turbines in more than 70 countries across
industry segments Cost optimization through Value Chain
Lower Production Cost owing to over 200
turbines manufactured per year (Economies
of Scale)
Benchmark manufacturing practices that
ensure waste elimination reducing
overheads
High efficiency steam turbines that reduce
operating cost (reduced fuel consumption)
16
Global Network
INDIA UK INDONESIA
SALES, SERVICE AND SALES, SERVICE AND REGISTERED MARKETING AND
MANUFACTURING FACILITY MANUFACTURING FACILITY OFFICE SERVICE OFFICE
Triveni Turbine Limited Triveni Turbine Limited Triveni Turbines Europe Triveni Turbines DMCC
Private Ltd
12-A, Peenya Industrial Area, Plot No.491, Sompura C/O Vistra UK (3rd Floor) Suite No. 56, 23rd Floor,
Bengaluru-560 058, 2nd Stage, KIADB Sompura 11-12 St James’s Square, ANZ Tower,Jl. Jend.
Karnataka, India. Industrial Area London, SW1Y 4LB, Sudirman, Jakarta
Phone: +91 80 22164000 Nelamangala Taluk, United Kingdom Pusat – 10220, Indonesia
Fax : +91 80 22164100 Bengaluru Rural - 562 123 Phone: +44 203 872 7310 Phone : +62-21-29546888
Fax : +44 203 872 7311 Fax : +62-21-29546889
www.triveniturbines.com www.triveniturbines.co.uk www.triveniturbines.id