Professional Documents
Culture Documents
Special Devices and Accessories: Eaton
Special Devices and Accessories: Eaton
Eaton ®
Special Devices
and Accessories
Contact Resistance 30m max. 30m max. 30m max. 30m max. 30m, 100m max. 30m max. 30m, 100m max.
(Initial)
Insulation 100M min. 100M min. 100M min. 100M min.
100M min. 100M min. 100M min.
Resistance @ 250V dc @ 500V dc @ 500V dc @ 500V dc
Dielectric AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS 600V ac (50-60Hz)/
Strength (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) 1,500V ac (50-60Hz)
Shock Resistance:
Electrical Approx. 30G More than 30G More than 30G More than 30G Approx. 30G More than 30G 100G
Mechanical Approx. 100G More than 100G More than 100G More than 100G Approx.100G More than 100G 100G
Ambient -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +125°C -25°C to +80°C
Ambient Humidity 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max.
Service Life:
Electrical (at rated load, 15,000-500,000 10,000-100,000 10,000 50,000 6,000-100,000 50,000-100,000 100,000
depending on type) ops./min. ops./min. ops./min. ops./min. ops./min. ops./min. ops./min.
Service Life: 10,000,000 10,000,000 10,000,000 2,000,000 10,000,000 10,000,000 10,000,000
Mechanical ops./min. ops./min. ops./min. ops./min. ops./min. ops./min. ops./min.
4.2
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.3
C Button A
See Solder 10 Straight (4.4) B
SEV 5A/125V ac 50 E 1 P. D.T. 0 SG Series
Page 4.4 PCB 30 Straight (6.4) C General
G Straight (12.3) D
SF SERIES — SUBMINIATURE WATERPROOF
Button A
Solder 10 Straight (4.4) B 1 P. D.T. 0
See Straight (6.4) C
SF 5A/125V ac 50 Page 4.4 E PCB 30 1 P. S.T.-NO 1
Straight (12.3) D
Wire (Bottom) 90 S Roller (5.9) E 1 P. S.T.-NC 2
Roller G
SG SERIES — GENERAL
A Solder 10 Button A
0.1A/125V ac 10 H
B Screw 20 Straight (12.9) B
J
3A/125V ac 30 C PCB 30 Straight (27.2) C 1 P. D.T. 0
K
See D Right-Angle 60
SG 6A/125V ac 60 Page 4.5 L Straight (51.1) D 1 P. S.T.-NO 1
E Quick Connect
SGV Series
10A/125V ac 70 M 70 S Roller (24.2) E 1 P. S.T.-NC 2 General VDE
F (.187″)
N Roller (12.2) G
15A/125V ac 80 G Quick Connect
P (.250″) 72 Roller (25.6) H
SGV SERIES — GENERAL VDE
Button A
Straight (13.7) B
Quick Connect
4A/125V ac 40 E (.187″) 70 Straight (27.2) C
See
SGV Page 4.5 Straight (51.0) D 1 P. S.T.-NO 1
10A/125V ac 70 M Quick Connect
(.250″) 72 S Roller (24.2) E
Roller (12.2) G
Roller (25.6) H
SJ SERIES — LOW TORQUE
L Straight (50) P
SJ See SJ Series
5A/125V ac 50
Page 4.5 S Solder 10 Straight (65) Q 1 P. D.T. 0
Low Torque
H Straight (80) R
4.4 Q Refer to page 4.6 for definitions. W Reference the Selection Table (page 4.3) and Lever Type Drawings (page 4.6).
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.5
Q Reference the Selection Table (page 4.3) and Lever Type Drawings (page 4.6).
4.5
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.6
Button Straight
Code A Code B
0˚
38˚
MECHANICAL TERMS
MECHANICAL TERMS
Movement Distance or angle the actuator travels in returning
Free Position The unoperated, fully extended position of the actuator. Differential from Operating Position to Reset Position.
Distance or angle the actuator travels Release The amount of external force or torque the switch will overcome
Pretravel from free position to the Operating Position. Force when returning from Overtravel Position to Free Position.
Operating The position of the actuator when the snap action of Total Travel The sum of pretravel and overtravel.
Position all switch contacts occurs during actuation stroke.
Operating Force or torque applied to the actuator A rapid motion of the contacts from one position to another.
Snap Action
Force to reach the Operating Position. Snap Action is independent of rate of travel of actuator.
Movement of actuator from Operating Position At any point, the amount of force holding stationary
Overtravel Contact Pressure
to final position at end of actuating stroke. and movable contacts together.
Overtravel Force or torque applied to actuator to move from The effective open distance between the movable
Contact Gap
Force Operating Position to full Overtravel Position. and stationary contacts.
Reset Position of actuator when all switch contacts An arrangement of contacts such that the circuit is
Multiple Break
Position return to positions prior to actuation. broken simultaneously in several places.
4.6
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.7
8.40±0.30
7.45 (.290)
(.330)
(.270)
(.260)
6.86
(.240)
6.65
6.05
6.50 (.260)
+0.10
3.50 (.140) 1.50 (.060)
2.20 –0
(.090)
3.20 +0.30
(.130) –0
+0.10
ø2.20 2.50 – 0
(.090) 0.90 ø2.05 HOLE (.100)
(.035) (.080)
6.50 3.15 0.40 7.50±01 7.50±01 2.40
(.260) (.120) (.016) (.300) (.300) (.090)
5.80 (.200) 5.80 (.200) 5.80±0.15
(.230) 5.20 9.50±010
12.80±0.15 (.500) (.200) (.370)
(.290)
(.270)
2.20– 0 (.090)
7.45
6.90
2.90 (.110)
Lead NC gray
10.20 (.400)
(.090)
+0.10
2.40
9.50 (.370)
ø2.50 (.100)
+ 0.10 +0.10
ø2.40 – 0 3.20
8.80 7.30 (.130)
2.50 – 0
1.60 (.090) ø1.60 (.10)
(.350) (.290)
(.060) (.060)
6.40 5.20 9.50±0.10
5.10 0.60 (.024) Thickness
(.200)
9.50 (.370) (.250) (.200) (.370)
Min 500 Min 500
Max 20 (Max .790)
19.80 (.780) (Min 19.70) (Min 19.70)
(.230)
7.00 (.280)
15.90 (.630)
2.40 – 0
(.120)
K
3.10
(.110)
L
2.90
(.090 )
NC
G H
+0.10 NO
ø2.40 – 0
(.090) 1
(.020)
+0.10
0.50
2.50– 0
(.100 ) COM
3.20 ø3.40
(.130) (.130)
1.60 8.80 (.350) 7.30 (.290) 7.70 (.300)
6.40 (.250)
(.060)
5.10 9.50 ± 0.10
(.200) (.370) 22.20 (.870) 1 SGV Series has only one terminal (NO).
17.50 (.690)
(.260)
6.70
C NO NC
(.410)
10.30
0.80
(0.030)
4.7
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.8
Q Add code letters and numbers for Superstructure Style, Pushbutton Color and Pushbutton Shroud Color (if applicable). Example: SA37BCE12-2A6.
W Not available with decorative shroud.
RECTANGULAR CAP STYLE 17.78 (.700) ROUND CAP STYLE 13.97 (.550) ROUND CAP STYLE
26.00 Dia. 23.90 Dia.
(1.024) (.941)
19.40 Dia. (.764) 17.78 Dia. (.700)
2.03 13.97 Dia.
15/32 Dia. Nom. 15/32 Dia. Nom. (.080)
32 Threads 32 Threads (.550)
Per Inch 6.01 (.237) Per Inch
24.71 (.973) 24.71 (.973)
11.63
41.80 (.458) 14.09
2.92 Flat This 2.92 Flat This 37.82
(1.646)
5.76 (.115) Side 29.71 5.76 (.115) Side (1.489) (.550)
29.71
(.227) (1.170) (.227) (1.170)
C-H C-H
NC S 10.31 NC S 10.31
16.38 (.406) 16.51 (.406)
(.645) NO COM (.650) NO COM
4.8
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.9
DOOR INTERLOCK SELECTION TABLE (BOLD FACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Nominal Ratings Q
Amperes Number Screw Terminal SA37BCE45-10B6
Horsepower Features
of Poles Catalog Number Pushbutton Superstructure
125-250V ac 125V dc 250V dc 125-250V ac
— SS12ET10-20Y3
15 0.5 0.25 1/2 One Pole #6-32 Tapped hole in SS12ET10-20Y2
actuator (.375″) deep
— SS12ET10-21Y3
15 0.5 0.25 1/2 Two Pole #6-32 Tapped hole in SS12ET10-21Y2
actuator (.375″) deep
Q Sea Level: 10A, Resistive or Inductive; 6A, Motor Load. 50,000 feet: 10A, Resistive; 6A, Inductive.
ONE POLE
Side Panel Measurement 4 Mtg. Holes 20.63
4 Mtg. Holes 6-32 NC Thd. 13.21 (.520) 6-32 NC Thd. (.812) 4.55
10.31 (.406) (.179) SS12ET10-20Y2
Door Interlock
12.70 6.35
5.54
(.500) (.250)
(.218)
47.75 42.16 Max.
Free Position (1.660)
9.53 Max. (.375) (1.880) Terminal Insulators
TWO POLE
4 Mtg. Holes Side Panel Measurement 20.63 (.812)
6-32 NC Thd. 13.21 (.520) 4 Mtg. Holes
6-32 NC Thd. 4.55
11.10 (.179)
(.437)
46.03
(1.812)
23.01
(.906) 5.54 6.35
(.218) (.250)
Free Position
9.53 Max. (.375) 47.75 Terminal Insulators SS12ET10-21Y2
(1.880) 42.16 Max. (1.660)
Door Interlock
4.9
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.10
4.10
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.11
PADDLE CONTROL
49.78
(1.960)
Lettering to be white. Lettering style
W
O
R
E
P
F
F
WIPER
26.01
(1.024)
W
H
S
A
50° ± 5°
11.53
5.44 (.454)
(.214) DS126AEDY
Dimmer Slide Control
25.88 ± .51
4
(1.019)
43.64 21.79
(1.718) (.857)
2.54 2 Places
(.100)
33.83
40.18 (1.332)
(1.582)
Black
DP124AEDY
Dimmer Paddle Control
SLIDE CONTROL
R 3.96 Typ
(R .156)
Blue
M
D
2.54
T
H
G
R
B
I
PA N E L
(.100)
17.15
26.01
(.675)
(1.024)
20.32
11.38 (.800)
R 2.03 Typ
(.448) (R .080)
42.24
(1.663)
Black
49.91 R 2.29 Typ WS12WBESY
(1.965) (R .090) Wiper Slide Control
18.92 19.76 Travel
(.778)
(.745) 22.02 ± .13
8.13 (.867)
See Detail A
(.320)
24.49 Ref
(.964)
41.91
(1.650) 44.04 ± .127
(1.734)
68.07
(2.680) C of
Pivot Point
Detail A
33.07 Typ 2 Plcs
Panel Opening
(1.302)
Terminal Identification:
Positive (+) (blue wire)
Blue Negative (–) (black wire)
Yellow Load (yellow wire)
Positive (+) L.E.D. light (blue wire)
Open Position
Black Negative (–) L.E.D. light (black wire) WP12WBELY
Wiper Paddle Control
4.11
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.12
CONNECTOR DRAWINGS
6294544 2977048
4.12
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.13
RW200 SERIES
Slowest
Intermittent 6.30 Dia
Off/Park Speed (.248 Dia)
20º 9.40
(.370)
Flats
70º
EATON
Fastest
Intermittent 55.57
Speed (2.188)
WASHER
WIPER
Washer
(Push In)
20º Continuous
Low Speed
15.47
+.25
VIEW B
4
-.38
(.609
+.010
-.015 ) 34.50
(1.358)
10.77
(.424)
2.51 +.15
(.099) 76.94 -.25
( +.006
3.029 -.010 )
56.64
45.84 (2.230)
(1.805)
84.71 Approx.
(3.335 Approx.) Blue Lead
Red Lead
114.43 Approx. Black Lead
(4.505 Approx.) Brown Lead
4.13
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.14
4.14
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.15
18.24
24.21 (.718)
(.953)
8.71
(.343)
33.32
29.74 (1.312)
(1.171)
23.01 7842K2
32.92 (.906)
(1.296) Heavy Duty Keylock
4.15
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.16
UTILITY UTILITY
2 P. S.T. Nest Plug-in In-line Nylon Yes 1402
10A, 125V ac 2 P. S.T. Nest Plug-in In-line Nylon No 140L2
8 (6)A, 250V ac 2 P. S.T. Nest Screw In-line Nylon Yes 140CP2
2 P. S.T. Nest Screw In-line Nylon No 140CPL2
INDUSTRIAL INDUSTRIAL
22A, 125V ac/dc 2 P. S.T. Flange Screw Overhanging Nylon No PT2A21B
10A, 250V ac/dc 2 P. S.T. Flange Screw Overhanging Nylon Yes PT2A1A11B
10.0
7.00 (.270) (.394)
28.65 R 28.60
(R 1.125)
36.00 (1.120)
(1.410) 36.20 ± 0.76 Ø 4.35
(1.145) (Ø .171)
1 1
2 2
11.05 16.20 2 1
(.430) (.640) 4.00
(.157)
1.50 2 1
(.059)
4.16
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.17
Q 8622K2: 4A, 125V. Series 8600 have higher ratings available. Contact your local Eaton Sales Representative.
(1.090)
(.936) (1.287)
15.54 9.78
J1/J2 Series
(.610) (.380) 16.00 29.00 AC Variable
13.50 (.624) 29.00 (1.131)
Off Position
(.527) (1.131)
62.74 (2.470)
4.17
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.18
Q Ratings listed for 125V ac also apply at 28V dc. Also supplied with a 20A, 277V ac rating as standard.
4.18
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.19
17.27 (.680)
6.35 24.38 21.08 (.830)
(.250) 11.18 18.92 (.960)
(.440) (.745)
17.27 (.680)
11.18 21.08 (.830)
6.35 (.440) 18.92 24.38
(.250) (.745) (.960)
4.19
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.20
10A, 125V ac
5A, 250V ac 2 P. S.T. General Purpose Float — Long 2 Wire Leads Up 8980K148
1/2 Hp, 125V ac General Purpose Weight — Long 2 Wire Leads Up 8980K60
4.20
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.21
Contacts open,
7.92 (.312) Dia. this position
20.57
43˚ 30˚ operating force
(.810)
5.16 Ref. 2 oz. min.-7 oz. max.
4.78 (.188) Dia. (.203)
2 Holes Weight Float Switch Type
Switch Type
33.02 (1.300)
33.02 (1.300) 10.67 2-6.35 (.250) Wide X .81 (.032) Deep
69.85 (2.750) 11.10 (.437) (.420) Quick Connect Tabs
4.75 (.187)
2 Female terminals for
6.35 (.250) X .81 (.032)
91.44 6.35 Q.C. terms.
(3.060) (.250) 9.40 (.370)
31.75 23.11 (.910) 8980K44
20.57 (1.250) Pedestal
(.810) 37.34 (1.470)
74.02
55.55 (2.914)
(2.187) 3.18
56.34
(.125)
34.93 (2.218)
R 106.68 (1.375)
(R 4.200) Heyco
Strain
55.55 Relief
(2.187) 34.93 Bushing 8980K55
(1.375) Mounting #1207, Black Submersible
47.45 bracket
(1.868) for 1-1/4 -
1-1/2
dia. pipe 38.86
(1.530)
R 71.37
(R 2.810) 25.40
30˚
(1.000)
Total
Throw
47.45 35.05
(1.868) (1.380)
20.04
22.94 (.789) 8980K60
(.903) 30˚ 28.96 General Purpose
Total Throw (1.140)
44.20 4.75 2-.250 Wide X .032 Deep 9.37
55.55 (1.740) (.187) Quick Connect Tabs (.369)
Dia. (2) 5.59
(2.187)
Holes 2-Female terminals for pin (.220)
type quick connect to tabs.
(AMP 427-42745-1)
4.21
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.22
MOUNTING HARDWARE SELECTION TABLE Q (BOLD FACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Dimensions mm (inches)
Size Description Material Inside O.D. or Dim. Dim. Across
Thickness Catalog
Diameter Across Flats Corners
(Dim. A) Number
(Dim. B) (Dim. C) (Dim. D)
MOUNTING NUTS MOUNTING NUTS
3/8-27 Nickel Plated Brass 3.18 (.125) — 14.27 (.562) 15.88 (.625) 15-2526-2
3/8-24 Hexagon Locknut Bright Nickel Plated Brass 3.18 (.125) — 14.27 (.562) 15.88 (.625) 15-2525-6
11/32-32 Nickel Plated Brass 1.60 (.063) — 12.01 (.473) 13.49 (.531) 15-2525-2
Zinc-Chromate Treated 1.91 (.075) — 15.88 (.625) — 15-192
Bright Nickel Plated Brass 1.98 (.078) — 13.87 (.546) 15.88 (.625) 15-2525-58
Hexagon Locknut Nickel Plated Brass 1.98 (.078) — 13.87 (.546) 15.88 (.625) 15-2525-59
Zinc-Chromate Treated 4.76 (.188) 19.89 (.783) 25.80 (1.125) — 15-2528-2
Nickel Plated Brass 1.98 (.078) — 14.27 (.562) 16.66 (.656) 15-966-2
Hexagon Facenut Semi-Lustre Nickel Plated Brass 1.98 (.078) — 14.27 (.562) 16.66 (.656) 15-966-6
Bright Nickel Plated Brass 1.68 (.066) — 14.27 (.562) — 15-124F1
Knurled Facenut Black Cupric Oxide Plated Brass 1.68 (.066) — 14.27 (.562) — 15-124F5
15/32-32 Nickel Plated Brass 2.77 (.109) — 15.88 (.625) — 15-90
Chamfered Dress Nut Bright Nickel Plated Brass 3.84 (.151) 7.92 (.312) 17.45 (.687) — 15-994-2
Standard Knurl Nut with Shoulder Nickel Plated Brass 2.77 (.109) — 15.06 (.593) — 15-2534-14
Q Hardware items are sold for use with Eaton switches only. Minimum ordering quantity on all items is 100.
HEXAGON LOCKNUTS KNURLED NUT CHAMFERED DRESS NUT KNURLED DRESS NUT
OR FACENUTS KNURLED FACENUT WITH SHOULDER CATALOG NO. 15-994-2 CATALOG NO. 15-189-5
B
D B
A C A C
C C A C
A
A
4.22
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.23
APPLICATION TABLE Q
Switch Catalog Numbers Switch Catalog Numbers
Catalog Locking Terminal Catalog Locking Terminal
Number Locknut Facenut Lockwasher Number Locknut Facenut Lockwasher
Ring Screws Ring Screws
APPLICATION TABLE APPLICATION TABLE
7070-7073 15-192 15-124F1 — — 811-2 8130-8166 — — — — 811-2
7320-21 15-192 15-966-2 — — 811-14 8194 — — — — 11-1766
7300-7317 — 15-966-6 — — 811-2 8261-62 — 15-966-6 16-886 — —
7360-61 15-192 15-966-2 — — 811-161 8280, 90, 95 15-192 15-124F1 — — 11-26
7402 15-192 15-966-2 — — 11-1766 8282, 83, 92, 97 15-192 15-124F1 — — 11-26
7500-7510 15-192 15-124F1 — — 811-2 8307 — — — — 11-26
7546-7548 15-192 15-124F1 — — 811-2 8337 — — — — 811-161
7560-71 15-192 15-124F1 — — 811-2 8370-75 15-192 15-124F1 — — 11-26
7576 15-192 15-124F1 — — 11-1369
8381-82,86,91,96 15-192 15-124F1 — — 11-26
7580-87 15-192 15-124F1 — — 811-2 8406 — — — — 11-26
7590-97,99 15-192 15-124F1 — — 811-2 8410 — — — — 811-7206
7630-32 15-192 15-124F1 — — 811-2 8411, 18 15-192 15-966-2 — — 811-7206
7660-7670 — 15-966-2 16-886 29-761 11-1893
7690-95 15-192 15-124F1 — — 811-2 8432-35 15-192 15-124F1 — — 811-2
8440 15-192 15-124F1 — — 11-26
7700-05 15-192 15-966-2 — — 811-2 8442-45 15-192 15-124F1 — — 811-2
7800-7805 15-192 15-124F1 — — 811-2 8448 15-192 15-966-2 — — 811-2
7810
7811
—
—
—
—
—
—
—
—
11-6106
11-6074-4 8690 15-192 15-966-2 — — 811-7248 4
7812-7813 — — — — 11-6074-11 8800-8860 — 15-966-6 16-886 29-761 11-1893
7814-16 — 15-1043 — — 11-6100 8928K478-482 15-192 15-124F1 — — 11-26
7818 — — — — 11-6074-4 8928K492-495 15-192 15-994-2 — — —
7835-36 15-192 15-124F1 — — —
7842K2, K3 15-2525-58 — — — 11-6085-2
7846 15-2525-59 — — — — 8980 — — — — W
7990-92 15-192 15-966-2 — — 811-2 SA37 15-192 — — — —
8004-05 — — — — 811-2
8054-8057 — — — — 811-2
6.35
(.250)
6.35
(.250)
15.88
12.70 (.500) (.625)
4.23
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.24
19.05
(.750)
26.21 (1.032)
Decorator Facenuts
SELECTION TABLE Q DIMENSIONS APPROXIMATE IN MM (INCHES)
Type Color Catalog Number
CAT. NO. 15-1048 CAT. NO. 15-1049
Black 15-1048-3
Knurled Facenuts Brite Clear 15-1048-7
Brite Black 15-1049-3
Beveled Facenuts Brite Clear 15-1049-7
Q Decorator Facenuts for designer line and 15/32″ bushing switches, 15/32-32 thread.
11.13
11.13 (.438)
(.438) Dia.
Dia. Hole
Hole
15.88
Dia.
(.625)
15.88
Dia.
(.625) 1.60
20˚
(.063)
4.24
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.25
Q Hardware items are sold for use with Eaton Switches only.
Indicating Plates
SELECTION TABLE Q
Marking
Keyway Location Material Finish Catalog Number
Opposite Keyway Keyway Side
ON
ON OFF .320″ Steel Burnished Nickel 30-5632-4
OFF
ON OFF .032″ Steel Burnished Nickel 30-5632-13
Panel Seal
•Prevents moisture and
32-341
contaminants from entering
panel enclosure. 1/16" Lettering (located on angular surface).
.072 .105
•Behind panel mounting. .082 .120
•Stainless steel cup washer .467 Dia.
.472 Cupwasher
assures proper seating of Stainless Steel
ESPORT CONNECTOR
3 6
ESPORT Connector
2 5 Catalog Number 28-5558
43.21 ± .51 locations 1, 2, 3, 4, 5, and 6 accept
(1.701) Packard 12015870 Metri-Pack Terminals.
1 4 Location 7 And 8 accept Packard
12034046 Metri-Pack Terminals.
7 8
23.11 ± .51
(.910)
35.36 ± .38 55.37 ± .51
(1.392) (2.180)
55.37 (2.180)
23.11 (.910)
24.38 ± .76 45.97 ± 1.52
(.962) (1.815)
± 1.52
24.38 ± .76 45.97
(.962) (1.815) 20.62
(.812)
33.78 ± .13
(1.335)
33.78 ± .13 24.13 ± .13
5A 5A
5B 5B
7 7
4 4
6 6
8 8
(1.335) (.954)
24.13 ± .13
35.56 (1.400) 31.88 (1.255)
(.954)
47.50 ± 1.52
(1.877)
47.50 ± 1.52
(1.877)
20.62
(.812)
17.73
(.698)
4.26
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.27
44.02
(1.734)
48.18 End 50.80
(1.897) Bezel (2.00)
57.91
(2.28)
(2) End Bezels (2) End Bezels And (1) Center Bezel R 4.75
(R .187)
30.48
Panel Opening
For 2 End
Panel Opening
For 2 Ends and 1 Center Bezel
(1.20)
4
Bezels
12.55
Bezel Catalog Numbers (.494)
25.63
End Center (1.009)
+.51 +.51
48.26 –.00 48.26 –.00
EURO-LOOK 17-19264 17-19263
(1.900) (1.900)
Panel Opening NGR 17-21160 17-21159
Reference Only
Thickness: 1.0 to 2.0 to 3.0
(.039 to .078 to .118)
Dimensions: 51.46 (2.026 +.254 –.000) plus
number of center bezels times 1.030
Tolerence: +.254 –.000 for each center
bezel up to a maximum of +.050
B +.25 R 3.96
31.88 –.03
(R .156)
(1.255)
C
A D
38.86
(1.53) Euro-Look/
E Esport NGR +.25
16.51
44.07 ± .31 -.02
2.03 2.54 (1.735)
A (.650)
(.080) (.100)
R 1.52 R 2.03
(26.01 B
Bottom (R .060) (R .080)
View 1.024)
8.64 8.51
C
(.340) (.335) 3.30 ± .25
13.46 13.97 (.130)
D
(.530) (.550)
50.04 R 3.96 R 6.35 36.25 ± .13
(1.97) E
(R .156) (R .250) (1.427) 20.83 ± .13
(.820)
+.13 Panel Opening
44.04 –.00 36.83 Reference Only
(1.734) (1.450) Thickness: 1.01 to 3.55
30.23 (.040 to .140)
(1.190) Best Results Obtained From:
Panel Opening +.13 2.03 to 3.17
Reference Only 22.02 –.00 (.080 to .125)
Thickness: .76 to 4.83mm (.867)
(.030 to.190)
Panel 16.66 21.08
Opening (.680) (.830)
Part will also fit Eaton
Panel plug Catalog Number 17-19544-2 gang mounting boxes.
For use with Euro-Look and ESPORT. Catalog Number
NGR panel plug Catalog Number 17-21543 17-19263 and 17-19264. Panel plug Catalog Number 53-3318
For use with EURO/SR
4.27
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.28
“THREE INDEPENDENT” ON-ON-ON CIRCUIT DIAGRAM ROCKER, TOGGLE AND PUSHBUTTON CIRCUIT DIAGRAMS
Note: For switch modified with “Three Independent” ON-ON-ON Special
Circuit. External Jumpers are required. Converts 2PDT to 1P3T or 4PDT to Circuit
Schematic
Circuit
Schematic
2P3T. User to connect wiring per instructions given below. Letter Letter
E 2 5 8 11 M 2 4
1P3T 1
1 2 3 1 2 3 1 2 3 3 9 12
(4 P. S.T.) Q 6 (2 P. S.T.)
1 3
4 5 6 4 5 6 4 5 6
F 1 4 7 10 NY
2 5 8 11
(4 P. D.T.) W (2 P. D.T.)
3 6 9 12
4
GE 2
P
(1 P. S.T.) 3
6 (1 P. D.T.)
4 C NC NO
HR 2
QU B
A H
(1 P. D.T.) 6 (2 Circuit) G
3 C NC
NO
4.28
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.29
NON-ILLUMINATED NON-ILLUMINATED
2 12 25
1 10
ON NONE OFF ON NONE OFF
(1 P. S.T.) 1 (2 P. S.T.) 11 24
12 25
2 12 11
ON NONE OFF ON* NONE OFF
(1 P. S.T.) 11 (2 P. S.T.) 11 24
2 12 25
3 12
ON* NONE OFF ON NONE OFF*
(1 P. S.T.) 1 (2 P. S.T.) 11 24
2 12 13 25 26
4 13
(1 P. S.T.) 1
ON NONE OFF*
(2 P. D.T.) 11 24
ON NONE ON
4
2 3 13 12 26 25
5 14
ON NONE ON ON OFF ON
(1 P. D.T.) 1 (2 P. D.T.) 11 24
3 2 13 12 26 25
6 15
ON OFF ON ON NONE ON*
(1 P. D.T.) 1 (2 P. D.T.) 11 24
3 2 13 12 26 25
7 16
ON NONE ON* ON* OFF ON
(1 P. D.T.) 1 (2 P. D.T.) 11 24
3 2 13 12 26 25
8 17
ON* OFF ON ON* OFF ON*
(1 P. D.T.) 1 (2 P. D.T.) 11 24
3 2
9
ON* OFF ON*
(1 P. D.T.) 1
ILLUMINATED ILLUMINATED
18 3 26 26 25
ON NONE OFF ON OFF ON*
(1 P. S.T.) 1 2 (1 P. D.T.) 13 24
19 12 27 26 25
24 ON NONE OFF ON OFF ON*
(1 P. S.T.) 11 (2 P. S.T.) 13 24
12 12 25
20 28
11 25 26
ON NONE OFF ON NONE OFF
(1 P. S.T.) W (2 P. S.T.) 11 24
3 12 25
21 29
ON* NONE OFF 11 24 ON NONE OFF
(1 P. S.T.) 1 2 (2 P. S.T.) E 13 26
12 12 25
22 30
ON NONE OFF* ON* NONE OFF
(1 P. S.T.) 11 13 (2 P. S.T.) 11 24
25 26 12 25
23 31
ON NONE ON ON NONE OFF*
(1 P. D.T.) 24 13 (2 P. S.T.) 11 24
26
24 25 32
13 24
ON OFF ON 3 2
(1 P. D.T.) (Indicator)
26
25 25
ON NONE ON*
(1 P. D.T.) 13 24
* Momentary contact.
Q Terminal numbers 1, 2 and 3 denotes single pole base.
Terminal numbers 11, 12, 13, 24, 25 and 26 denotes double pole base.
W Single pole in double pole base with lamp independently wired.
E Double Pole — Independently wired lamp. 4.29