Professional Documents
Culture Documents
Department of Mechanical Engineering/ Hachalu Hundessa Campus Ambo University Meng2141
Department of Mechanical Engineering/ Hachalu Hundessa Campus Ambo University Meng2141
Ambo University
Course Code MEng2141
Course Title Machine Drawing
Module Machine Drawing module
Module Coordinator NN
Lecturer Chala A.
ECTS Credits 3(5)
Contact Hours (per 135(16+96+0+48)
semester)
Course Objectives & Course Objectives
Competences to be Give complete practice on drawings of various machine elements
Acquired and their assemblies.
Introduce the students to various types of detailed and assembled
drawings of simple machines.
Make them practice the use of machine tolerance allowance,
surface texture symbols
Teach them how to assemble and visualize machine components
Competences (Learning Outcomes)
Acquire the knowledge and ability of visualizing different
mechanical components
Communicate with others through standard works
Prepare exploded view and spare part drawings of a task
Course Course Description
Description/Course Types of machine Drawings; Conventional representation of
Contents Fasteners such as screw threads, rivets and welds , Bearings, Seals,
Gears, Springs and Shafts; Welded Connections, Systems of Fits and
limits, Tolerance and Allowance , Surface Texture, Geometric
Tolerance; Exercises using simple units such as check valves,
workshop jacks, vises, hand pumps, hand grinders, hand drills, and
so forth. Detail parts and assembly drawings of machines.
Course Contents 1. Fundamentals of Machine Drawing: Standardization; Paper
size; Scales; Title block; Lettering; Bill of materials
2. Types of Machine Drawing: Assembly drawings; Part drawings;
Shop drawings; Catalogue drawings; Schematic representations;
Patent drawings
3. Dimensioning: Size dimensions; Location dimensions; Rules in
dimensioning; Dimensioning of standard features
4. Temporary Fasteners: Bolted joint; Riveted joint; Pinned and
keyed joints; Circlip
5. Bearings and Seals: Bearings; Seals
6. Gears: Spur gears; Bevel gears; Worm gears and worm wheels
7. Springs: Compression springs; Tension springs; Torsion springs
8. Shafts: Splined shafts; Serrated shafts
9. Welded Connections: Types of welded joints; Conventional
representations
10. Fits and Tolerance
11. Surface Texture
12. Geometric Tolerance
13. Working Drawing: Detail drawings; Assembly drawings
Pre-requisites MEng1032 (Engineering Drawing)
Semester Year II, semester I
Mode of delivery Semester based
Status of Course compulsory
Teaching & Lectures supported by class exercises,
Learning Methods Assignment Common for all the students, and
Individual Assignments, which is not same for each student.
Assembled units and cut section models
Reading and understanding technical drawings, drawing
exercises
Dimensioning Exercises, Measuring of parts
Familiarization with individual parts and modules
Planning assembly processes
Assembly exercises, complete assembly
Assembly project spur gear
Assembly check Valve
Assembly Project Piston Compressor
Assembly project warm gear
Assembly Project Worm Gear, Parts Set
Evaluation systems Continuous assessment 60%,
Final Examination 40%.
Course Policy Minimum of 80% attendance during lecture hours, and 100%
attendance during practical work sessions, except for some
unprecedented mishaps.
References 1. Cecil H. Jensen, Jay D. Helsel, and Dennis Short, Engineering
Drawing And Design, Aug 17, 2007
2. David, Allan Low, Manual of Machine Drawing and Design - Mechanical Drawing ,
Jun 1, 2006
3. Singh S., & Sah, P.L., Fundamentals of Machine Drawing ,
Printice Hall of India Private Limited, New Delhi, 2003
4. Frederick E Giesecke, Alva Mitchell, Henry C Spencer, and Ivan
Leroy Hill, Engineering Graphics (8th Edition), Aug 12, 2003.
5. Sidheswar, N., Machine Drawing, Tata McGraw-Hill Publishing
Company Ltd., New York, 1989
6. Frank M., Fredrick D., Edwin T., Michael J., & John T.,
Engineering Graphics, John Wiley & Sons, New York, 1989
7. Thomas French, Charles Vierck, and Robert Foster,
Engineering Drawing and Graphics Technology , Jan 1, 1993.
8. Sidheswar, N., Machine Drawing, Tata McGraw-Hill Publishing
Company Ltd., New York, 1989
As we are seen from the above literature review some researcher have been try to study on effect of solar radiation
and geometry on the power output of Solar chimney power plant. The main objectives of this thesis is to study the
chimney shape, chimney height, collector diameter, effect of solar radiation and collector diameter on the power
output of SCPP using ANSYS software.
A little effort have been carried out toward the study of the effects of the geometry and solar radiation on the power
output of SCPP. The main objectives of the present work is to study the effect of solar radiation, chimney height,
collector diameter and chimney shape (top convergence) on the power output of SCPP using ANSYS Fluent
software.