Professional Documents
Culture Documents
MSDS Bitacryl
MSDS Bitacryl
BITAL ASIA
DATA SHEET
Page : 1/4
Revision :0
Reg No. 21Q11241 Date : 20/06/2016
MANUFACTURER
I. PRODUCT IDENTIFICATION
acrylic 50 - 60 9063-87-0
Not harm-full.
Not flame-able
Not dangerous cargo
Inhalation : Move to fresh air and take a rest. Apply artificial respiration
if difficulty in breathing. Seek medical attention after
significant exposure.
Copyrights © PT. BITAL ASIA
DATA SHEET
Page : 1/4
Revision :0
Reg No. 21Q11241 Date : 20/06/2016
Act in accordance with the internal emergency plan and information sheets on
actions to take after an accident or other emergencies.
Isolate leaks provided that there is no additional risk for the people performing this
task.
This product is not classified as dangerous to the environment. Keep product away
from drains, surface and underground water.
It is recommended:
Absorb the spilling using sand or inert absorbent and move it to a safe place. Do not
absorb in sawdust or other combustible absorbent. For any concern related to disposal
consult section 13
Form : Pasta
Color : Variation
Elongation at Break, % : 536
Flash point : Non Flammable
pH :9
Tensile strength, Psi : 160
Heat Resistant 100 0C/100 Hours : No Defect
Disposal :
Advice concerning disposal should be sought from local Authority, but as a guide,
liquid residues should be incinerated or recycled, and spillages absorbed onto inert
materials such as sand should be land filled.
Receptacles containing residues present a potential fire and explosion hazard.
Empty Containers :
Should be sent to authorize operators for reconditioning or scrap.
The data given here is based on current knowledge and experience. The purpose of
this safety sheet is to describe the products in terms of their safety requirements. The
data does not signify any warranty with regard to the product properties.