Professional Documents
Culture Documents
Bitumen Cemtec Damproofing Bituminous Coating
Bitumen Cemtec Damproofing Bituminous Coating
Bitumen Cemtec Damproofing Bituminous Coating
BITUMINOUS COATING
SOLVENT BASED
DESCRIPTION: STORAGE
CEMTEC DAMP PROOFING BITUMINOUS Long life in air tight closed containers under
COATING is a cold applied anti-corrosive Bitumen temperature 5 - 30° C.
coating comprising selected Grade Asphalt and fast
CLEANING
drying solvent to act as a damp proofing
membrane. It can also be used as a protective CEMTEC DAMP PROOFING BITUMINOUS
coating below ground. COATING can be cleaned with any suitable
petroleum solvent.
USES
Protective anti-corrosive, waterproofing coating for PACKING
metal and concrete surfaces, such as escape Available Standard 20 Ltr. Pail and 200 Ltrs.
stairs, ladders, storage tanks, gutters, down pipes, Drum
fences, etc. TECHNICAL DATA
ADVANTAGES: Application Standard BS . 3416 TYPE I
Excellent adhesion and self-healing properties
PROPERTIES SPECIFICATIONS
Easy application and smooth finish
Color Shiny black Liquid
Anti-corrosive coating
Specific Gravity 0.98 - 1.1
It has good resistance to mild acids, alkalis and
salts. Drying Time 4 hours
Exhibits soil bacteria resistance. (Surface tack free)
Over Coating Interval 24 hours
PREPARATION
Corrosion Test
Application surface should be cleaned and
with 3% NaCl Stable & No Blistering
free from dust, grease or rust, etc. Surface
for application may be slightly damp but not Flash Point Min 32° C.
wet.
HEALTH AND SAFETY INSTRUCTIONS
APPLICATION
CEMTEC DAMP PROOFING BITUMINOUS
CEMTEC DAMP PROOFING BITUMINOUS COATING is solvent based and gives out
COATING can be applied with Brush, Roller inflammable drying which may have
or Spray. narcotic effect if inhaled or absorbed
Minimum of two coats should be applied. through skin. drying which may have narcotic
effect if inhaled or absorbed through skin.
PRECAUTION
Use protective clothing, gloves, masks,
CEMTEC DAMP PROOFING BITUMINOUS goggles, etc.
COATING has fast evaporating solvent,
hence, containers should always be closed. Avoid contact with skin, eyes or inhalation.
Successive coats will be applied after previous In such events remove the person to fresh
coat is dry. air, irrigate with clean water over affected
area at first instance and call for medical
Read health and safety instructions before use.
attention.
COVERAGE
Scan Here For Download 2m /litre at 300 microns DFT
2
Data Sheet
The Technical Specification information and recommendations given are based on the current technical knowledge and the user or his
representative is recommended to check the suitability of the product CMCI reserves the right to amend the technical characteristic of the
product as part of ongoing research and development. As the work execution is beyond the direct and continuous control of CMCI no
guaranty and or responsibility is assumed on the performance of work completion executed with use of our products.